• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.241-246
• /
• 2019

Carbon master batch (CMB) rubber sheets, which are stored in stacks, are difficult to separate during reuse because of the adhesion between sheets caused by the stacked weight over time. To solve this problem, in the actual rubber product manufacturing process, various anti-tacking agents (solid powder or liquid surfactants) are applied to the sheet surface. In this study, the emulsion samples of zinc (Zn)-stearate/triethanolamine (TEA)-stearate mixtures were prepared using TEA-stearate as a surfactant, prepared using an industrially manufactured Zn-stearate powder, and their basic anti-tacking properties were studied. During the process of manufacturing emulsion, a heat treatment process and an auxiliary surfactant were introduced to improve the dispersion stability. Results showed that the heat-treated sample exhibited a significant improvement in terms of sedimentation, storage stability, and anti-tacking characteristics since the Zn-stearate particles were reduced to a smaller size by the heat-treatment than that of the original Zn-stearate powder.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.5
• /
• pp.419-424
• /
• 2002

After the patterning and probe process of wafer have been achieved, the dicing processing is necessary to separate chips from a wafer. The dicing process cuts a semiconductor wafer to lengthwise and crosswise directions to make many chips. The existing general dicing method is the mechanical cutting using a narrow circular rotating blade impregnated diamond particles or laser cutting. Inferior goods can be made by the mechanical or laser cutting unless several parameters such as blade, wafer, cutting water and cutting conditions are properly set. Moreover, we can not apply these general dicing method to that of GaN wafer, because the GaN wafer is harder than general semiconductor wafers such as GaAs, GaAsP, AIGaAs and so forth. In order to overcome these problems, this paper describes a new wafer dicing method using fixed diamond scriber and precision servo mechanism.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.352-361
• /
• 2005

In this study, conventional head-end processes of spent TRISO fuel have been reviewed to develope more effective treatment methods. The main concerns in the TRISO treatment are to effectively separate the carbon and SiC contained in the TRISO particles. The crush-burn scheme which was considered in the early stages of the development has been replaced by the crush-leach process because of $^{14}C$ problems as a second waste during the process. However there are still many obstacles to overcome in the reported processes. Hence, innovative thermomechanical concepts to breach the coating layers of the TRISO particle with a minimized amount of second waste are proposed in this paper and their principles are described in detail.

• The Journal of Korea Robotics Society
• /
• v.3 no.4
• /
• pp.308-314
• /
• 2008

Recently, simultaneous localization and mapping (SLAM) approaches employing Rao-Blackwellized particle filter (RBPF) have shown good results. However, no research is conducted to analyze the result representation of SLAM using RBPF (RBPF-SLAM) when particle diversity is preserved. After finishing the particle filtering, the results such as a map and a path are stored in the separate particles. Thus, we propose several result representations and provide the analysis of the representations. For the analysis, estimation errors and their variances, and consistency of RBPF-SLAM are dealt in this study. According to the simulation results, combining data of each particle provides the better result with high probability than using just data of a particle such as the highest weighted particle representation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.298-301
• /
• 1995

In this study, the properties of Thermally Stimulated Current is measured automatic Data Acquisition System with a A/D Converter set. The A/D Converter set is configured with DIO 8255(Intel), AMD 9513 Timer/Counter and some Programed Controllers. Especially, the numerical method of asymtotic estimation to separate single relaxation curve and physical factors related to charged particles were obtained rapidely and completely. As a result, the data obtained by automatic Acquisition System need to be corrected to average value and the whole control and inspectation system is needed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.521-521
• /
• 2013

Collective Thomson scattering (CTS) system is being developed in KAERI based on high power gyrotrons. CTS is a promising diagnostic method to measure fast ion distributions and potentially the fusion product alpha particles in magnetically confined plasmas. By utilizing millimeter-waves from high power gyrotrons as a probing beam, spatially and temporally resolved 1-D ion velocity distributions can be obtained from the scattered radiation with less scattering geometrical constraints. The pulse modulation of gyrotrons enables to separate scattering signal from ECE background noises. The feasibility was assessed with the calculation of spectral density functions under the condition of KSTAR plasmas. Further CTS system requirements are also discussed.

• Journal of Environmental Science International
• /
• v.32 no.5
• /
• pp.385-394
• /
• 2023

There is a need for a method that can effectively remove wastewater containing small-sized particles such as TiO₂. In this study, we attempted to remove TiO₂ wastewater using electrocoagulation-electroflotation two-step separation. The TiO₂ wastewater was effectively removed via batch electrocoagulation-electroflotation separation. However, in the batch process, the simultaneous operation of electrocoagulation and electoflotation was challenging due to the high residual turbidity. In the continuous operation, electrocoagulation and electoflotation reactors were kept separate. The turbidity removal in continuous operation was similar to that in the batch process, nevertheless, the residual Al concentration was high, leading to the conclusion that counterterm ensures against residual Al were necessary.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.23.1-23.1
• /
• 2008

A space shuttle with a Prototype Synchrotron Radiation Detector (PSRD) was launched in 2001. PSRD was set in the Endeavour payloads and got data for 12 days. The purpose of PSRD is to measure synchrotron photons which are created by high energy charged particles near earth. Synchrotron photons are confused with background photons. We studied how to separate synchrotron photons from backgrounds.

• Analytical Science and Technology
• /
• v.28 no.4
• /
• pp.288-298
• /
• 2015

A distribution study of glitter was conducted from a local university building. The potential recipient surfaces chosen were the 1,000 chairs kept in 16 separate classrooms of the building. The surface of chairs contacting with buttocks and back of users were tape lifted with commercial adhesive tapes, and the surface of adhesive tapes were examined with a stereomicroscope to locate the glitters. 12 glitter particles were found from 11 chairs kept in 16 classrooms of a building. This result indicates that the possibility of glitter finding from Korean violent crime scene is high. The 12 glitters found from the chairs were analyzed with a stereomicroscope and an FTIR spectrophotometer to find the matching glitter. The stereomicroscope was used for the observation of the shapes, dimensions, colors and holograms of each glitter, and the FTIR spectrophotometer was used for the analysis of the chemical composition of the coating material of each glitter. The examination results revealed that 8 glitters out of 12 glitters were not sharing the common origin each other. Also, two glitters found from two separate classroom chairs share common microscopic and FTIR spectroscopic characteristics which indicating two glitters share common origin. The record of the students who had used the classrooms was traced and the authors could find that the classrooms where the same glitters were found were shared by a group of students who listen to the same class. This result implies that the path of the involved people should be considered while assessing the value of trace evidence.

• Journal of Korea Water Resources Association
• /
• v.38 no.10 s.159
• /
• pp.841-849
• /
• 2005

Two-phase flows, e.g. sediment-laden flow and bubbly flow, have two different flow profiles; flow velocity and sediment velocity. To measure velocity distributions of two-phase flows, it is necessary to use sophisticated instruments which can separate velocity profiles of two-phases. For bubbly flows, PIV (Particle Image Velocimetry) or PTV (Particle Tracking Velocimetry) has given fairly good velocity profiles of two-phases. However, for sediment-laden flows, the applications of PIV or PTV has not been so successful, because the sediment particles introduced to the flow kept the images from being analyzed. A new algorithm, which consists of several image analysis methods, is proposed to analyze sediment-laden flows. For detection algorithm, threshold method, edge detection method, and thinning method are adapted, and for finding matching pair PIV and PTV routines are combined. The proposed method can (1) detect sediment particles with irregular boundaries, (2) remove reflected images and scattered images, and (3) discriminate tracer particles from reflected images of sediment particles.