• International Journal of Costume and Fashion
• /
• v.5 no.1
• /
• pp.42-58
• /
• 2005

This study examines the color image of the early 20th century and compares the work of designers' who represented fashion and trend at that time with cinema costume which made after 1990's. This shows the relationship and differences between the color of the past which is presented through designer's works and present which is visualized through cinema costume. The result of this study shows that the color which is reproduced through cinema costume is decided according to the story, time period, scenery space and character of the film rather than being a genuine attempt at reviving the color of the past time period. The color is exaggerated or limited to manipulate the effects of character and story creating a stronger impression to the audience.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.41-54
• /
• 1987

The purposes of this study were to evaluate the color differences those can exist between different brands of porcelain with identical shade designation, and to find their causes. For these purposes the following experiments were executed: The color of each opaque and layered porcelain specimen was determined by spectral reflectance measurements with a spectrophotometer. The compositions of each opaque porcelain powder were analyzed by qualitative, and quantitative analysis. Microscopic structures of each opaque porcelain were observed by scanning electron microscope. The results were as follows: 1. Identical shade of different brands of porcelain produced significantly different colors. 2. Color differences among the three brands were found under different light sources. 3. Color differences among the three brands were mostly a result of differences in kinds and amounts of opacifying agents and fluxes and microstructure of porcelain systems. 4. When porcelain systems have similar compositions and firing cycles, they produced similar colors.

• Current Optics and Photonics
• /
• v.2 no.6
• /
• pp.554-562
• /
• 2018

This study presents a color 3D scanner based on the laser structured-light imaging method that can simultaneously acquire 3D shape data and color of a target object using a single camera. The 3D data acquisition of the scanner is based on the structured-light imaging method, and the color data is obtained from a natural color image. Because both the laser image and the color image are acquired by the same camera, it is efficient to obtain the 3D data and the color data of a pixel by avoiding the complicated correspondence algorithm. In addition to the 3D data, the color data is helpful for enhancing the realism of an object model. The proposed scanner consists of two line lasers, a color camera, and a rotation table. The line lasers are deployed at either side of the camera to eliminate shadow areas of a target object. This study addresses the calibration methods for the parameters of the camera, the plane equations covered by the line lasers, and the center of the rotation table. Experimental results demonstrate the performance in terms of accurate color and 3D data acquisition in this study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.3 s.39
• /
• pp.115-135
• /
• 1990

The purpose of this study was to suggest an improvement proposal for colors in urban environment with special regard to the surface color and their situations of apartment buildings in Seoul. For this goal, 167 cases of different color types of apartment buildings were surveyed. And, the survey was performed in the view of color by areas, by localtion, by builder, by paint year, by built year, by appearance of building, and by surface texture to prove the influencing factors on the surface colors. These collected data analyzed and compared with the existing studies to find out the changing trend of colors. The results are as follows : 1) The use of neutral gray($26.4{\%}$) and warm color(YR, Y, GY; 56.4%) were dominant and the usage trend of higher 'value'(87.4%) and lower 'saturation'(73.0%) was obvious. Especially, the use of PB and P was noticeable. 2) In comparing the existing studies, the changing trend in the surface color pattern was found. That is, neutral gray was used dominantly in 1970's, warm color(YR, Y)in the middle of 1980's. In the end of 1980's, warm color were also used dominantly same as before and GY, PB, P were used noticeably with some rising tendency of higher 'value' and lower 'saturation' was obvious. 3) The results of analysis by localtion shows that the different color groups might exist in Seoul city. Neutral gray and YR were dominant in zone I. Warm colors(YR, Y, GY)were prevailed in zone II, III, IV. In zone V, many colors were evenly used. In zone VI, middle values at warm color were dominant. Progressively, these color groups with further study could be considered in the color management in urban environment possibly. 4) Surface color of apartment buildings were different from their builders. 5) Concerned with the painted year, the use of higher 'value' and lower 'saturation' was increased gradually with the change of times. 6) the analysis by the built year revealed that the 'value' of surface colors on the old buildings was lower than that of the new ones. 7) The 'value' of colors on the surface with texture was higher than that of the surface without texture. 8) In the combination of two colors, the use of 'value' with difference at the same 'hue' was found harmonions in many cases, but the 'saturation' in usage was included in the ambiguity (Moon & Spencer's term). The ambiguity in color harmony should be improved in the near future.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2453-2459
• /
• 2014

Five novel cyanine dyes containing julolidine and indole moieties were synthesized. Several color compensating films for plasma display panels (PDP) were prepared using these dyes. The spectroscopic and physicochemical properties of the synthesized dyes in both solution and film state were evaluated. For each color compensating film, the optimum ratio of dye to binder was determined on the basis of transmittance, half band width, and photo-stability of the color compensating film. The five synthesized dyes showed sharp absorption peaks near 590 nm (orange light) and had molar extinction coefficients above $1{\times}10^5M^{-1}cm^{-1}$. The melting point of the dyes was above $200^{\circ}C$ and photo-stability of the color compensating films was improved by introducing substituents at the 5th position on the indole derivatives.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.403-408
• /
• 2021

Various surface colors are predicted and implemented using the interference color generated by controlling the thickness of nano-level diamond like carbon (DLC) thin film. Samples having thicknesses of up to 385 nm and various interference colors are prepared using a single crystal silicon (100) substrate with changing processing times at low temperature by plasma-enhanced chemical vapor deposition. The thickness, surface roughness, color, phases, and anti-scratch performance under each condition are analyzed using a scanning electron microscope, colorimeter, micro-Raman device, and scratch tester. Coating with the same uniformity as the surface roughness of the substrate is possible over the entire experimental thickness range, and more than five different colors are implemented at this time. The color matched with the color predicted by the model, assuming only the reflection mode of the thin film. All the DLC thin films show constant D/G peak fraction without significant change, and have anti-scratch values of about 19 N. The results indicate the possibility that nano-level DLC thin films with various interference colors can be applied to exterior materials of actual mobile devices.

• ETRI Journal
• /
• v.26 no.3
• /
• pp.195-202
• /
• 2004

In this paper, we propose a visual accessibility technique in an MPEG-21 framework. In particular, MPEG-21 visual accessibility for the colored-visual resource of a digital item is proposed to give better accessibility of color information to people with color vision deficiency (CVD). We propose an adaptation system for CVD as well as a description of CVD in MPEG-21. To verify the usefulness of the proposed method, computer simulations with CVD and color adaptation were performed. Furthermore, a statistical experiment was performed using volunteers with CVD in order to verify the effectiveness of the proposed visual accessibility technique in MPEG-21. Both the experimental and simulation results show that the proposed adaptations technique can provide better color information, particularly to people with CVD.

• Journal of Fashion Business
• /
• v.23 no.6
• /
• pp.64-75
• /
• 2019

This study analyzed the clothing color preferences of elementary students and the colors of clothes actually worn at school in terms of hue and tone. The sample consisted of 385 students enrolled at a public elementary school in Seoul. In this study, 120 color cards were used to guide the hue and tone. Descriptive statistics and chi-square analysis were used to analyze the data. The results were as follows. First, the most preferred clothing colors were achromatic, purple blue, red, and blue, while the most preferred tones were vivid, and pale. Second, the largest percentage of top colors worn at school were achromatic and vivid tones, while the largest percentage of bottom colors at school were achromatic and dark tones. Third, elementary boys preferred vivid and strong tones, while girls preferred pale and vivid tones. Fourth, students at higher grades preferred deeper and darker tones compared with students in lower grades.

• Journal of Ceramic Processing Research
• /
• v.20 no.1
• /
• pp.30-34
• /
• 2019

Copper (Cu)-incorporated silica aerogel was synthesized by a sol-gel process with two-step drying process for color modification. The microstructure of the silica aerogel was not affected significantly by the Cu concentration and an amorphous structure was maintained without any crystalline impurity phases. The textural properties of the silica aerogels investigated by using N2 adsorption-desorption isotherms exhibited the typical features of mesoporous materials. The pore size and porosity were not changed significantly even with the incorporation of Cu up to 1.5 M, which indicates negligible variation of thermal insulating properties. However, the color of the aerogel changed from white and light greenish to dark greenish with increasing Cu content. The color change of the silica aerogel was due to the modification of the electron energy band structure of silica by the Cu atomic levels. Therefore, the color of the silica aerogel powders could be manipulated by incorporating Cu without degrading the thermal insulating properties.

• Journal of the Korean Home Economics Association
• /
• v.29 no.1
• /
• pp.51-58
• /
• 1991

This study was conducted to investigate the dietary and nutritional status supplied by group feeding for blue color and white color in Seoul and Kyunggi area. The results are summarized as follows : 1. Blue color and white color of the average food supply per person per day was 1370.0g. Blue color of the total fool supply was consisted of 35.1% grain, 44.1% vegetables. White color of the total fool supply was consisted of 31.8% grain, 44.0% vegetable. The amount of milk product, fruit and fat supply were very small. 2. Blue color and white color of the ratio of main dish and side dish supplied was 69 : 31, 60.0 : 39.7. 3. Main dish all is rice. Side dish ard kinds of soupes and Jigeai Johngol in the two groups. In the kind of side dish white color much more than blue color. Dessert are scarcely supplied in the two groups. 4. The mean daily supplies of energy and 9 nutrients were above the level of the R.D.A. Blue color and white color of the mean daily amount of energy supply was 2653.0㎉ 3022.6㎉. Blue color and white color of the ratio of carbohydrate, protein, and fat supplied was 68.4%, 18.6%, 13.1%, and 62.1%, 20.9%, 17.0%. 5. Blue color and white color of the average feeding cost amounts to 460won, 812won per meal. 6. Blue color; There were high correlations in supply amoung energy, protein, fat. Carbohydrate, calcium, iron, riboflavin, niacin. White color; There were high correlation in supply amoung energy, protein, carbohydrate, calcium, iron, thiamin, riboflavin, niacin, vit-C.