• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1093-1094
• /
• 2008

A tomography system using microwave multi-channel transceiver was fabricated and measured. The tomography system is applicable to detection of breast cancers in a human body. This system is configured by microwave muiti-channel transceivers, a illumination chamber housing monopole antennas and coupling liquid, and image reconstruction algorithm solving inverse scattering problem.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.227-228
• /
• 2008

A diagnosis based on EM is composed of multi-channel transceiver, antennas in illumination tank, liquid and image reconstruction algorithm for solving inverse scattering problem. The antennas in diagnosis were fabricated and measured in lossy liquid. The 10dB impedance bandwidth of the antenna is 600MHz - 3.5GHz

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1089-1090
• /
• 2008

In this paper, it is applied the reconstruction algorithm to detection of breast cancer. To solve the forward and inverse problem, Finite-Difference Time-Domain (FDTD), Tikhonov regularization and Gauss-Newton method are used. And to confirm the accuracy of the algorithm, it is applied to arbitrary model.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.250-257
• /
• 2015

This paper presents an experimental measurement system for 3-6 GHz microwave tomography (MT) of the breast. The measurement system is constructed as a minimal test bed to verify key components such as the sensing antennas, radio frequency (RF) transceiver, sensing mechanism, and image reconstruction method for our advanced MT system detecting breast cancer at an early stage. The test bed has eight RF channels operating at 3 to 6 GHz for high spatial resolution and a two-axis scanning mechanism for three-dimensional measurement. The measurement results from the test bed are shown and discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.422-426
• /
• 2012

Transient radiation is emitted during a nuclear explosion. Transient radiation causes a fatal error in the CMOS circuit as a Upset and Latch-up. In this paper, transient radiation NMOS, PMOS, INVERTER SPICE model was proposed on the basisi of transient radiation effects analysis using TCAD(Technology Computer Aided Design). Photocurrent generated from the MOSFET internal PN junction was expressed to the current source and Latch-up phenomenon in the INVERTER was expressed to parasitic thyristor for the transient radiation SPICE model. For example, the proposed transient radiation SPICE model was applied to CMOS NAND circuit. SPICE simulated characteristics were similar to the TCAD simulation results. Simulation time was reduced to 120 times compared to TCAD simulation.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1373-1375
• /
• 1997

In this study, 3-D underwater object restoration using ultrasonic sensor fabricated with porous PZT-Polymer 3-3 type composite are presented Using the acquired underwater object data $16{\times}16$ pixels, Modified SCL neural networks using the $16{\times}16$ low resolution image was used for underwater object restoration of $32{\times}32$ high resolution image.

• 대한두경부종양학회:학술대회논문집
• /
• 2007.11a
• /
• pp.210-210
• /
• 2007

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.155-155
• /
• 2011

그래핀(graphene)은 모든 탄소 원자가 표면에 존재하는 이차원 결정이기 때문에 다른 고체 표면에 고착될 때 인장 및 압축 변형(tensile & compressive strain)과 전하 도핑(charge doping)에 취약하다고 알려져 있다. 본 연구에서는 산화실리콘(SiO2/Si) 기판 위에 기계적으로 박리된 그래핀에 혼재되어 나타나는 기계적 변형과 전하 도핑 현상을 분석할 수 있는 라만 분광법 기술을 개발하고자 하였다. 대부분의 시료에서 기계적 변형으로 인해 라만 G-band와 2D-band의 진동수(${\omega}$)가 특별한 상관관계(${\Delta}{\omega}2D/{\Delta}{\omega}G$ = 2.0 ${\pm}$ 0.2)를 가진다는 사실을 확인하였다. 전자 친화도가 큰 F4-TCNQ (tetrafluorotetracianoquinodimethane)를 증착하여 화학적으로 p-형 전하 도핑을 유도한 그래핀에서는 기계적 변형과는 분명히 구별되는 상관관계(${\Delta}{\omega}2D/{\Delta}{\omega}G$ = 1.0 ${\pm}$ 0.3)가 관찰되었다. 본 연구는 라만 분광법을 통해 그래핀의 기계적 변형과 전하 도핑 정도를 정량적으로 분리해서 분석할 수 있는 방법을 제시해 준다.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2004.04a
• /
• pp.55-56
• /
• 2004

• ETRI Journal
• /
• v.27 no.3
• /
• pp.243-249
• /
• 2005

A mobile antenna for multimedia communications with Ku-band geostationary satellite KOREASAT-3 and JSAT-2A is presented. The forward link of the satellite communication is 11.7 to 12.75 GHz, and the return link is 14.0 to 14.5 GHz. The mobile antenna is designed to be a stair structure using 24 active phased array elements in order to provide a low profile, and to be at a non-periodic array distance using the genetic algorithm. Also, the designed antenna uses the double beam forming method for stable satellite tracking. The fabricated mobile antenna is examined using various experiments to confirm its capability for practical application. From the measured results, the fabricated mobile antenna system is confirmed to have a good performance.