• Tuberculosis and Respiratory Diseases
• /
• v.75 no.2
• /
• pp.79-82
• /
• 2013

Tracheal Stenosis after Tracheostomy Treated Successfully with Papillotome Electrocautery A 39-year-old woman presented with symptoms of dyspnea. Ten years previously, she had received a tracheostomy because of the decision to not continue taking an anticonvulsant drug. Presently, chest computed tomography showed diffuse stenosis and focal web at the cervical trachea. We performed bronchoscopy and found a two-thirds reduction of the upper trachea due to the web-like fibrotic stenosis. Papillotome electrocautery removed the stenotic lesion. Endobronchial electrocautery is a valuable tool with potential for therapy of an endobronchial obstructing airway lesion. We report this case to introduce the successful treatment with papillotome electrocautery.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.129-132
• /
• 2006

This paper is to investigate passing performance of high performance concrete between reinforcing bar depending on maximum size of coarse aggregates. Increase in maximum size of coarse results in decrease in water demand and sand to aggregate to secure target slump flow. The larger the maximum size of coarse aggregates is, the denser the space between reinforcing bar is, the amount of concrete passed through the reinforcing bar cage shows to decrease. HPC has favorable passing performance, regardless of aggregate size, when only vertical reinforcing bar is arranged. Whereas, when vertical and horizontal reinforcing bar is arranged at the same time, proper space between reinforcing bar is considered larger than 32mm in case of using 20mm coarse aggregate, 38mm in case of using 25mm aggregate. The increase in maximum size of coarse aggregate leads to increase compressive strength slightly. Length change shows to be decreased with the increase in maximum size of coarse aggregate.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1192-1194
• /
• 1999

Recently, there has been growing interest in utilizing cogeneration(COGN) system which has high energy efficiency due to the lacking of energy resource, but insertion of cogeneration system into existing power distribution system can cause several problems such as voltage variations, reenergizing of feeder isolated by fault, increasing fault current because of reverse power of COGN. Also these problems increase the complexity of control, protection, and maintenance of power distribution systems. Hence, some problems according to COGN interconnection operation to power distribution system must be taken into account so that operation and security of power distribution system is not disturbed. This paper deals with momentary voltage variations and fault analysis caused by interconnection operation of COGN.

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.2
• /
• pp.27-34
• /
• 2004

본 논문에서는 스윕에 기반하여 인체 형상을 모델링하고 변형하는 방법을 제시한다. 본 방법은 다각형 메쉬 형태로 주어진 3차원 인체 형상을 스윕 기반의 형상 구조로 재구성하여, 형상을 모델링하고 변형한다. 인체 형상의 팔, 다리, 몸통 등 각 부분을 근사하는 스윕 곡면을 생성하고 다각형 메쉬 상의 꼭지점들을 인접한 스윕 곡면과 연결하며, 스윕 곡면이 만나는 팔, 다리와 몸통 사이에서는 꼭지점마다 연결된 스윕 단면들을 블렌딩한다. 이를 통해 스윕을 제어하여 이와 연결된 인체 형상의 자연스러운 변형을 얻어낼 수 있다. 본 논문에서는 몇 개의 애니메이션 예들을 통하여 제시한 인체 변형 방법이 자연스러운 인체 동작 생성에 효과적임을 보인다. 본 논문의 결과들은 스윕 기반의 인체 형상 변형 방법이 실시간에 상당히 사실적이고 자연스러운 형상 변형이 가능함을 보여주어, 캐릭터 skinning 방법으로서 적절한 대안임을 보여준다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.389-390
• /
• 2008

The dependence of $f_T$ and $f_{max}$ on the unit finger width is measured and analyzed for $0.13{\mu}m$ MOSFETs. The increase of $f_T$ at narrow width is attributed by the parasitic gate-bulk capacitance, and the decrease of $f_T$ at wide width is generated by the reduction of increasing rate of $g_{mo}$. The increase of $f_{max}$ at narrow width is originated from the abrupt reduction of gate resistance due to the non-quasi-static effect. These analysis results will be valuable information for layout optimization to improve $f_T$ and $f_{max}$.

• Advances in pediatric surgery
• /
• v.4 no.1
• /
• pp.55-60
• /
• 1998

Six children with solid and papillary epithelial neoplasm of the pancreas were studied retrospectively. There were 2 boys and 4 girls. The mean age at operation was 11 years(range; 8-13years). Three patients had incidental abdominal mass, in two patients the mass was non-tender, in one patient the mass was tender. The minimum size of tumor was $6.5{\times}6.0$ cm and the maximum was $10.5{\times}8.0$ cm. Five tumors were located in the head of the pancreas, and the other one in the tail. Local invasion or metastasis was not noticed. Tumors were removed completely by performing the following operations: 3 pylorous preserving pancreaticoduodenectomy, 2 Whipple's operation and 1 distal pancreatectomy. There was no mortality. The histologic findings were characteristic. There were no recurrences during a follow-up of 0.5 to 12 years (mean; 5.0 years).

• Composites Research
• /
• v.25 no.6
• /
• pp.230-235
• /
• 2012

This paper presents the vibration characteristics and the optimization using the orthogonal array about applied composite optical structure of an aircraft. To acquire the vibration characteristics for stable line of sight, modal analysis are performed by using multi-body program ADAMS. And to optimize optical structure, for design variables were selected, larger-the-better characteristics were considered using results of S/N ratio and orthogonal array $L_9(3^4)$. When bearing constraints are selected, radial, axial and moment stiffness value are used to analysis for optimization until now. But B.S.R which is non-dimensional parameter is proposed, structures including bearings can be used for optimization. And then having a result of lager-the-better, the optimized values of each design variable were successfully suggested.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.50-56
• /
• 2013

Machine tools are the cores of industrial development in recent period. It is difficult to develop a system which can do cutting and grinding process in the one system. Hybrid Vertical Grinding System is capable of processing in a single apparatus cutting or grinding. The modal analysis and structural analysis for the development of Hybrid Vertical Grinding System is the first time of domestic work. In this study, Hybrid Vertical Grinding System bed was designed and analyzed by using SS401 and FC300 as materials. And by using Finite Element Methods, the design and material of the bed was analysed. Finally, we can make a better choice of structure and material of the bed by comparing the analysis results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.653-661
• /
• 2006

Metallic sandwich plates with various inner cores have important new features with not only ultra-light material characteristics and load bearing function but also multifunctional characteristics. Because of production possibility on the large scale and a good geometric precision, sandwich plates with inner dimpled shell structure from a single material have advantages as compared with other solid sandwich plates. Inner dimpled shell structures can be fabricated with press or roll forming process, and then bonded with two face sheets by multi-point resistance welding or adhesive bonding. Elasto-plastic bending behavior of sandwich plates have been predicted analytically and measured. The measurements have shown that elastic perfectly plastic approximation can be conveniently employed with less than 10% error in elastic stiffness, collapse load, and energy absorption. The dominant collapse modes are face buckling and bonding failure after yielding. Sandwich plates with inner dimpled shell structure can absorb more energy than other types of sandwich plates during the bending behavior.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.94-99
• /
• 2014

In this study, AISI M2 powder was selected primarily through various literature in order to improve the hardness and wear resistance. Among the laser metal deposition parameters, laser power was studied to improve the deposition efficiency in the laser metal deposition using a diode pumped disk laser. SKD61 hot work steel plate and AISI M2 powder were used as a substrate and powder for laser metal deposition, respectively. Fixed parameters are CTWD, focal position, travel speed, powder feed rate, etc. Experiments for the laser metal deposition were carried out by changing laser power. Through optical micrographs analysis of cross-section in LMD track, effect of the major parameters were predicted by track pitch. As the track pitch increased, so the reheated zone width, the overlap width and the minimum thickness was decreased. The hardness was decreased in the HAZ area, the hardness in the reheated HAZ area was decreased significantly and regularly in particular.