• Economic and Environmental Geology
• /
• v.10 no.4
• /
• pp.185-198
• /
• 1977

This paper is the result of a petrochemical study on the Jongam granite mass which intruded metasediments of Ogcheon zone, locating about 10km northwest from Miweon town, and the mass is $2.5km^2$ in area. In this study, the granite was petrographically analysed in such ways, modal analysis, myrmekite analysis, petrochemical study analysis and tectonic analysis of joint system. The findings are as follows: 1) The area of the granite distributed is a basin surrounded by metasediments. The granite is magma origin. 2) The major mineral composition of the granite are quartz, plagioclase, microcline orthoclase and biotite, and accessaries are muscovite, sericite, magnetite, zircon and sphene. 3) In triangles of $Qu-K{\cdot}fp-PI$, Bi-Or-Hb+Mt and Qu-Ab-Or, the data point areas are similar to those of the NW zone of D.S. Lee (1971) 4) The granite mass can be divided into three granites; quartz monzonite, granodiorite and biotite granite, by petrological aspect in detail. 5) It shows inverse ratio of content between quartz and plagioclase. 6) The myrmekite-texture of the granite are stem type and dominating in northern part. 7) In the tectonic analysis of joint, the strikes are almost constant in direction, N-S direction of dominant joints 8) The geological age of the granites estimated to be Jurassic in age. 9) According to the mineralogical distribution and joint systen, the intrusion direction of the granite magma was infered as from north to south.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.188-188
• /
• 2011

Recently, scaling down of ULSI (Ultra Large Scale Integration) circuit of CMOS (Complementary Meta Oxide Semiconductor) based electronic devices, the electronic devices, become much faster and smaller size that are promising property of semiconductor market. However, very narrow interconnect line width has some disadvantages. Deposition of conformal and thin barrier is not easy. And metallization process needs deposition of diffusion barrier and glue layer for EP/ELP deposition. Thus, there is not enough space for copper filling process. In order to get over these negative effects, simple process of copper metallization is important. In this study, Cu-V alloy layer was deposited using of DC/RF magnetron sputter deposition system. Cu-V alloy film was deposited on the plane SiO2/Si bi-layer substrate with smooth surface. Cu-V film's thickness was about 50 nm. Cu-V alloy film deposited at $150^{\circ}C$. XRD, AFM, Hall measurement system, and AES were used to analyze this work. For the barrier formation, annealing temperature was 300, 400, $500^{\circ}C$ (1 hour). Barrier thermal stability was tested by I-V(leakage current) and XRD analysis after 300, 500, $700^{\circ}C$ (12 hour) annealing. With this research, over $500^{\circ}C$ annealed barrier has large leakage current. However vanadium-based diffusion barrier annealed at $400^{\circ}C$ has good thermal stability. Therefore thermal stability of vanadium-based diffusion barrier is desirable for copper interconnection.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.207-211
• /
• 2006

IEEE 802.15.4a에서는 첩(Chirp)신호을 이용한 UWB(Ultra Wide Band) 시스템으로서 DBO(Differential Bi-Orthogonal)-CSS(Chirp Spread Spectrum) 기술을 선택적 표준안으로 정하였다. 기존 DBO-CSS에서는 다중 피코넷 간섭(MPI; Multiple Piconets Interference)을 피하기 위하여 각 피코넷 별로 Different Time-Gap을 할당하고 있다 하지만 완벽한 직교성이 존재하지 않는다는 특성을 가지고 있어서 간섭의 영향에 민감할 수 밖에 없고, 무선통신시스템의 성능 저하를 야기시킨다. 본 논문에서는 각 피코넷 별로 보다 완전한 직교성을 확보하기 위하여, 확산코드기법을 적용한 CSS 변복조 알고리즘을 제안하고, 또한 일정한 시간 구간동안 연속적인 직교특성을 가지는 이진 ZCD(Zero Correlation Duration) 코드를 사용하여 BER(Bit Error Rate) 성능 분석을 통해 SOP(Simultaneously Operating Piconets) 환경에서 다중 피코넷 간섭 등의 영향을 효과적으로 제거함을 확인하였다.

• Ceramist
• /
• v.22 no.2
• /
• pp.133-145
• /
• 2019

Thermoelectric energy conversion has attracted much attention because it can convert heat into electric power directly through solid state device and vice versa. Current research is aimed at increasing the thermoelectric figure of merit (ZT ) by improving the power factor and reducing the thermal conductivity. Although there have been significant progresses in increasing ZT of material systems composed of Bi, Te, Ge, Pb, and etc. over the last few decades, their relatively high cost, toxicity, and the scarcity have hindered further development of thermoelectrics to expand practical applications. In this paper, we review the current status of research in the fields of nanostructured thermoelectric materials with eco-friendly and low cost elements, such as skutterudites and oxides, for mid-high temperature applications, highlighting the strategies to improve thermoelectric performance.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.53-61
• /
• 2019

This study performs reliability analysis of three-dimensional temporary shoring structures with three different models. The first model represents a field model which does not have diagonal bracing members. The installation of bracing members is often neglected in the field for convenience. The second model corresponds to a design model which has the bracing members with the hinge connection of horizontal and bracing members at joints. The third model is similar to the second model but the hinge connection is replaced with partial rotational stiffness. The reliability analysis results revealed that the vertical members of the three models are safe enough in terms of axial force, but the vertical and horizontal members exhibit a big difference among the three models in terms of combination stress of axial force and bi-axial bending moments. The field model showed significant increase in failure probability for the horizontal member, and thus the results demonstrate that the bracing member should be installed necessarily for the safety of the temporary shoring structures.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.233-243
• /
• 1992

Ore mineralization of the Hwanghak copper deposit in the Ogsan area occurred in three stages of quartz (stage I and II) and calcite (stage III) veining along fissures in Early Cretaceous sedimentary rocks. Ore minerals are pyrite, pyrrhotite, chalcopyrite (dominant), sphalerite, hematite, galena, and Ag-, Pb-, and Bi-sulfosalts. These were deposited during the first stage at temperatures between $370^{\circ}C$ and < $200^{\circ}C$ from fluids with salinities between 0.5 and 7.6 equiv. wt. % NaCl. There is evidence of boiling and this suggests pressures of less than 180 bars during the first stage. Equilibrium thermodynamic interpretation accompanying with mineral paragenesis and fluid inclusion data indicates that copper precipitation in the hydrothermal system occurred due to cooling and changing in chemical conditions ($fs_2$, $fo_2$, pH). Gradual temperature decrease from $350^{\circ}$ to $250^{\circ}C$ of ore fluids by boiling and mixing with less-evolved meteoric waters mainly led to copper deposition through destabilization of copper chloride complexes. Sulfur isotope values of sulfide minerals decrease systematically with paragenetic time from calculated ${\delta}^{34}S_{H_2S}$ values of 8.2 to 4.7‰. These values, together with the observed change from sulfide-only to sulfide-hematite assemblages and fluid inclusion data, suggest progressively more oxidizing conditions, with a corresponding increase of the $sulfate/H_2S$ ratio of hydrothermal fluids. Measured and calculated hydrogen and oxygen isotope valutls of ore-forming fluids suggest meteoric water dominance, approaching unexchanged meteoric water values.

• Journal of Acupuncture Research
• /
• v.29 no.3
• /
• pp.9-18
• /
• 2012

Objectives : This research was performed to investigate the effects of Rhei Radix et Rhizoma pharmacopuncture at Bi-Su($BL_{20}$) on weight change, food efficiency, concentration of serum lipid, liver function of rats fed high fat diet for 8 weeks. Methods : Subject groups were diveded into normal diet group(Normal), high fat diet group(Control), high fat diet and saline in $BL_{20}$ treated group(Saline), high fat diet and Rhei Radix et Rhizoma pharmacopuncture in $BL_{20}$ treated group(PT-1, 0.008mg/ml/g), high fat diet and Rhei Radix et Rhizoma pharmacopuncture in $BL_{20}$ treated group(PT-2, 0.021mg/ml/g), and high fat diet and Rhei Radix et Rhizoma pharmacopuncture in $BL_{20}$ treated group(PT-3, 0.042mg/ml/g). Pharmacopuncture was bilaterally treated at BL20 every 4 days, totally 14 times in 56 days. We observed the changes of body weight, food efficiency, ALT, AST, r-GTP, total cholesterol, triglyceride, HDL, LDL-cholesterol of each group. Results : 1. Body weight significantly decreased, as compared with the control group, in PT-1 from 2nd week to 8th week, in PT-2 from 4th week to 7th week. 2. Food efficiency decreased, as compared with the control group, in PT-1(0.05${\leq}$p<0.06). 3. HDL-cholesterol increased, as compared with the control group, in PT-1, PT-3, but not significantly. 4. In the changes of ALT, as compared with the control group, only in PT-1 group, the level of serum ALT decreased(0.05${\leq}$p<0.06). 5. As for the changes of r-GTP, as compared with control group, in every subject group, the levels of serum r-GTP significantly decreased. Conclusions : According to the above results, Rhei Radix et Rhizoma pharmacopuncture at $BL_{20}$ can act on body weight, food efficiency and liver function. It also does not seem to be injurious on liver function. To use Rhei Radix et Rhizoma pharmacopuncture for obesity, further studies on its underlying mechanism and optimal dosage might be needed.

• Korean Journal of Plant Resources
• /
• v.26 no.3
• /
• pp.389-396
• /
• 2013

The antioxidant enzyme and DPPH radical scavenging activity with variations in drying methods of diploid and tetraploid in Platycodon grandiflorum were determined. Antioxidant enzyme activities were measured as superoxide dismutase (SOD), catalase (CAT), peroxidase (POX), and ascorbate peroxidase (APX). The roots of Platycodon grandiflorum were freeze-dried, indoor-dried, hot-air dried, and microwave dried. The root extract of P. grandiflorum have shown the highest SOD enzyme activity of 92% in tetraploid of freeze-dried and indoor-dried while diploid of microwave dried showed the lowest SOD enzyme activity of 47.5%. The activity of CAT showed higher values in the root of tetraploid than in the diploid of P. grandiflorum in all drying methods. The APX activity showed relatively higher values in the root extract of freeze-dried both the diploid and tetraploid, but the difference in comparison with other extracts was not significant. The POX activities according to drying methods of diploid and tetraploid in P. grandiflorum showed relatively high values in freeze-dried and indoor-dried compared with other drying methods, and the POX activity between the diploid and tetraploid was not significant difference in each drying method. The DPPH radical scavenging activity with variation in drying methods of diploid and tetraploid in P. grandiflorum was the highest in the freeze-dried, and was higher in tetraploid than diploid in all the concentrations. In conclusion, the root of P. grandiflorum had the potent biological activities in both diploid and tetraploid. In particular, the tetraploid root of P. grandiflorum showing high antioxidant enzyme activity could be good materials for development of source of functional healthy food.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.1
• /
• pp.33-40
• /
• 2012

Triplet Ionospheric Observatory (TRIO) CubeSatforIon, Neutral, Electron MAgneticfields (CINEMA) is a CubeSat with the weight 3 kg that will be operated in the orbit conditions of about 800 km altitude and $90^{\circ}$ inclination angle, using the S-band and ultra-high frequency (UHF)-band communication frequencies. Regarding the communication antenna loaded on the satellite, the two patch antennas has the downlink function in the S-band, whereas the two whip antennas has the function to receive the command sent by the ground station to the satellite in the UHF-band. The uplink ground station that communicates through the UHF-band with the CINEMA satellite was established at Kyung Hee University. The system is mainly composed of a terminal node controller, a transceiver, and a helical antenna. The gain of the helical antenna established at the Kyung Hee University ground station was 9.8 dBi. The output of the transceiver was set to be 5 W (6.9 dB) for the communication test. Through the far-field test of the established system, it was verified that the Roman characters, figures and symbols were converted into packets and transmitted to the satellite receiver in the communication speed of 9,600 bps.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.481-490
• /
• 2008

Reaction wheel is one of the actuators for spacecraft attitude control, which generates torque by changing an inertial rotor speed inside of the wheel. In order to generate required torque accurately and estimate an accurate angular momentum, wheel speed should be measured as close to the actual speed as possible. In this study, two conventional speed detection methods for high speed motor with digital tacho pulse (Elapsed-time method and Pulse-count method) and their resolutions are analyzed. For satellite attitude maneuvering and control, reaction wheel shall be operated in bi directional and low speed operation is sometimes needed for emergency case. Thus the bias error at low speed with constant acceleration (or deceleration) is also analysed. As a result, the speed detection error of elapsed-time method is largely influenced upon the high-speed clock frequency at high speed and largely effected on the number of tacho pulses used in elapsed time calculation at low speed, respectively.