• 한국멀티미디어학회논문지
• /
• 제10권10호
• /
• pp.1260-1270
• /
• 2007

테스트 기술자들에게 아날로그 회로(또는 혼합신호 회로)의 테스트와 진단은 여전히 어려운 문제여서 이를 해결할 수 있는 효과적인 테스트 방법이 크게 요구된다. 본 논문에서는 time slot specification(TSS) 기반의 내장 전류감지기(Built-in Current Sensor)를 이용한 새로운 아날로그 회로의 테스트 기법을 제안한다. 또한 TSS에 기반 하여 고장 위치를 찾아내고 고장의 종류를 구별해 내는 방법을 제시한다. TSS 기법과 함께 제안하는 내장 전류감지기는 높은 고장 용이도와 높은 고장 검출을 그리고 아날로그 회로내 강고장과 약고장에 대한 높은 진단율을 갖는다. 제안하는 방법에서는 주출력과 전원단자등을 테스트 포인트로 사용하고 전류감지기를 자동 테스트 장치(Automatic Test Equipment)에 구성하므로써 테스트 포인트 선택과정의 복잡도를 줄일 수 있다. 내장 전류 감지기의 디지털 출력은 아날로그 IC 테스트를 위한 내장 디지털 테스트 모듈과 쉽게 연결된다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.619-625
• /
• 2016

본 논문에서는 풍력 발전 시스템에서 발생 가능한 고장 중 블레이드에 대한 고장 진단 방법으로 자이로 센서를 이용한 각속도 측정을 통해 고장 진단용 모니터링 시스템을 제안한다. 제안하는 방법은 우선 손상이 발생하지 않은 상태의 블레이드 회전에 대한 각속도 dataset을 구성한다. 블레이드 상태 판별을 위한 dataset 구성이 되었다면, 임의의 상태에 대한 블레이드가 부착된 풍력 발전기를 일정한 힘을 가해 회전시킨 후 최종적으로 블레이드의 손상 정도에 따라 발생하는 각속도의 차이를 비교하여 블레이드의 고장 진단에 대해 판단한다. 실험 결과 정상 상태의 블레이드는 초당 1회 (초당 $360^{\circ}$) 이상의 속도로 회전을 진행하며, 손상 상태의 블레이드는 초당 1회 미만의 속도로 회전하며 표준 편차가 급격히 증가하는 것을 확인할 수 있었다.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.241-248
• /
• 2009

This paper presents stochastic methodology based fault detection algorithm for induction motor systems. We measure current of healthy induction motors by means of hall sensor systems and then establish its probability distribution. We propose online probability density estimation which is effective in real-time implementation due to its simplicity and low computational burden. In addition, we accomplish theoretical analysis of the proposed estimation to demonstrate its convergence property by using statistical convergence and system stability theories. We apply our fault detection approach to three-phase induction motors and achieve real-time experiment for evaluating its reliability and practicability in industrial fields.

• 전자공학회논문지B
• /
• 제31B권10호
• /
• pp.53-66
• /
• 1994

In this paper, a fuzzy expert system is developed for fault diagnoisis of a drum-type boiler system in fossil power plants. The develped fuzzy espert system is composed of knowledge base, fuzzification module, knowledge base process module, knowledge base management module, inference module, and linguistic approximation module. The main objective of the fuzzy expert system is to check the states of the system including the drum level and detect faults such as the feedwater flow sensor fault, feedwater flow control valve fault, and water wall bube rupture. The fuzzy expert system diagnoses faults using process values, manipulated values, and knowledge base which is built via interviews and questionaries with the experts on the plant operations. Finally, the validity of the developed fuzzy expert system is shown via experiments using the digital simulator for boiler system is Seoul Power Plant Unit 4.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.905-910
• /
• 2008

Vibration analysis is widely used in machinery diagnosis and the wavelet transform has also been implemented in many applications in the condition monitoring of machinery. In contrast to previous applications, this paper examines whether acoustic signal can be used effectively along vibration signal to detect the various local fault, in local fault of gearboxes using the wavelet transform. Moreover, envelop analysis is well known as useful tool for the detection of rolling element bearing fault. In this paper, a acoustic emission (AE) sensor is employed to detect gearbox damage by installing them around bearing housing at driven-end side. Signal processing is conducted by wavelet transform and enveloping to detect her fault all at once gearbox using AE signal.

• 한국태양에너지학회 논문집
• /
• 제37권3호
• /
• pp.23-32
• /
• 2017

This paper presents losses comparison and analysis results for different types of fault modes of grid-connected photovoltaic system generated for long-term operation. The approach of losses comparison and analysis by faults is to identify relationship between measured and estimated values of five loss factors which are quantified from irradiance to system output power. This paper presents the symptom results for faults such as snow, shading, sensor defect, blackout, soiling and so on from three years or more monitored data. These results will indicate that it is useful to develop fault detection and diagnosis tool to enhance capacity factor and save operation and maintenance cost of grid-connected photovoltaic system in the field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.453-459
• /
• 2002

In this paper. the correlation among vibration. wear and temperature are experimentally investigated when rubbing is caused by static and dynamic forces. Each measurement reflects the characteristics of the system and is useful in detecting and diagnosing the current status of rotating machinery. For experiment, the rotor system with lubricating equipment such as trochoid pump, oil tank and wear detecting sensor is implemented to simulate the rubbing condition. Experimental results show that significant change in wear quantity can be notified when vibration signal is changed by rubbing. The results can be applied to system monitoring and fault diagnosis in rotating machinery.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.437-441
• /
• 1999

본 논문에서는 미지입력 외란에 대해서 강인한 새로운 형태의 고장 진단법을 제안한다. 시스템에 구동기만의 고장이 있는 경우는 한 개의 Luenberger 형태의 미지입력 PI 관측기의 설계에 의해 관측 적분 오차를 이용함으로서 구동기의 고장진단이 가능하고, 완벽한 분리가 이루어짐을 보이며, 복합적인 구동기 및 센서의 고장의 경우에는 다중 미지입력 PI 관측기를 출력의 개수만큼 설계함으로서 완벽한 고장진단 및 분리가 이루어짐을 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.257-260
• /
• 1997

Bluetooth is the most promising network paradigm which ca open the new area in the information technology. Especially, bluetooth can link all the electrical products and PCs(Personal Computer) to cellular phone or PDA. In this paper, the data from ECU which are gathered by scanner are communicated between tow PCs using the bluethooth modules. The acquired data are ECU's self diagnosis signal and sensor output signal. Self diagnosis signals are very important to check the ECU's state and sensor output signals. Using these data, the possibility of wireless communication with ECU is developed and verified. Protocol stack of bluetooth is L2CAP through HCI and wireless communication software of ECU's signal is developed using VC++ in Windows 98 environment.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.449-453
• /
• 2016

The amount of electrical energy has been increased with the rapid development of the industrial society. Accordingly, operating voltage of the power equipment and facility capacity are continuously increasing. Development trends of recent high-voltage electrical equipment are ultra high-voltage, large-capacity and compact. Early diagnosis of a failure of the power plant has been emerging as an important task as to supply high quality power to users. In this study, we have tried to develope an algorithm for distinguishing an arc fault signal generated in the power plant by using UV sensor.