• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.216-220
• /
• 2013

The etching characteristics of indium zinc oxide (IZO) in $Cl_2/Ar$ plasma were investigated, including the etch rate and selectivity of IZO. The IZO etch rate showed non-monotonic behavior with increasing $Cl_2$ fraction in the $Cl_2/Ar$ plasma, and with increasing source power, bias power, and process pressure. In the $Cl_2/Ar$ (75:25%) gas mixture, a maximum IZO etch rate of 87.6 nm/min and etch selectivity of 1.09 for IZO to $SiO_2$ were obtained. Owing to the relatively low volatility of the by-products formation, ion bombardment was required, in addition to physical sputtering, to obtain high IZO etch rates. The chemical state of the etched surfaces was investigated with X-ray photoelectron spectroscopy. These data suggested that the IZO etch mechanism was ion-enhanced chemical etching.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.323-328
• /
• 2014

D-MAC protocol is used convergence network, which is designed to connect wireless link between things. This protocol is supported to local data exchange and aggregation among neighbor nodes, and distributed control packet from sink to sensor node. In this paper, we analysis about efficiency of power consumption according to whether or not security authentication of D-MAC in convergence network. If authentication scheme is applied to MAC communication, it is related to power consumption of preamble whether or not with and without authentication process. It is reduced to energy consumption against denial attack of service, when it is applied to authentication. Future work will take the effort to deal with security authentication scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4644-4661
• /
• 2015

Wireless sensor networks are often organized in the form of clusters leading to the new framework of WSN called cluster or hierarchical WSN where each cluster head is responsible for its own cluster and its members. These hierarchical WSN are prone to various routing layer attacks such as Black hole, Gray hole, Sybil, Wormhole, Flooding etc. These routing layer attacks try to spoof, falsify or drop the packets during the packet routing process. They may even flood the network with unwanted data packets. If one cluster head is captured and made malicious, the entire cluster member nodes beneath the cluster get affected. On the other hand if the cluster member nodes are malicious, due to the broadcast wireless communication between all the source nodes it can disrupt the entire cluster functions. Thereby a scheme which can detect both the malicious cluster member and cluster head is the current need. Abnormal energy consumption of nodes is used to identify the malicious activity. To serve this purpose a learning based energy prediction algorithm is proposed. Thus a two level energy prediction based intrusion detection scheme to detect the malicious cluster head and cluster member is proposed and simulations were carried out using NS2-Mannasim framework. Simulation results achieved good detection ratio and less false positive.

• Journal of Sensor Science and Technology
• /
• v.27 no.1
• /
• pp.59-63
• /
• 2018

Among Internet of things (IoT) applications, the most demanding requirements for the widespread realization of many IoT visions are security and low power. In terms of security, IoT applications include tasks that are rarely addressed before such as secure computation, trusted sensing, and communication, privacy, and so on. These tasks ask for new and better techniques for the protection of data, software, and hardware. An integral part of hardware cryptographic primitives are secret keys and unique IDs. Physical Unclonable Functions(PUF) are a unique class of circuits that leverage the inherent variations in manufacturing process to create unique, unclonable IDs and secret keys. In this paper, we propose a low power Arbiter PUF circuit with low error rate and high reliability compared with conventional arbiter PUFs. The proposed PUF utilizes a power gating structure to save the power consumption in sleep mode, and uses a razor flip-flop to increase reliability. PUF has been designed and implemented using a FPGA and a ASIC chip (a 0.35 um technology). Experimental results show that our proposed PUF solves the metastability problem and reduce the power consumption of PUF compared to the conventional Arbiter PUF. It is expected that the proposed PUF can be used in systems required low power consumption and high reliability such as low power encryption processors and low power biomedical systems.

• KSBB Journal
• /
• v.32 no.1
• /
• pp.35-45
• /
• 2017

In this work the optical fiber glucose and lactate biosensors were developed by using fluorescent dye and enzyme immobilized on the end tip of an optical fiber. 3-Glycidyloxypropyl)methyldiethoxysilane (GPTMS), (3-Aminopropyl) trimethoxysilane (APTMS) and Methyltrimethoxysilane (MTMS) were used to immobilize glucose oxidase (GOD), lactate oxidase (LOD) and ruthenium(II) complex (tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II), $Ru(dpp)_3^{2+}$) as oxygen sensitive fluorescent dye. MTMS sol-gel was an excellent supporting material for the immobilization of $Ru(dpp)_3^{2+}$, GOD, and LOD on the optical fiber. Storage stability of the optical fiber glucose sensor was kept constant over 20 days, while the optical fiber lactate sensor had constant storage stability over 17 days. The optical fiber glucose and lactate biosensors also maintained good operational stability for 20 hours and 14 hours, respectively. The activities of the immobilized enzymes were most excellent at pH 7 and at $25^{\circ}C$. On-line monitoring of glucose and lactate in a simulated process was performed with the optical fiber glucose and lactate biosensors. On-line monitoring results were agreed with those of off-line data measured with high performance liquid chromatography (HPLC).

• Smart Structures and Systems
• /
• v.5 no.3
• /
• pp.223-240
• /
• 2009

As in any engineering application, the problem of structural assessment should face the different uncertainties present in real world. The main source of uncertainty in Health Monitoring System (HMS) applications are those related to the sensor accuracy, the theoretical models and the variability in structural parameters and applied loads. In present work, two methodologies have been developed to deal with these uncertainties in order to adopt reliable decisions related to the presence of damage. A simple example, a steel beam analysis, is considered in order to establish a liable comparison between them. Also, such methodologies are used with a developed structural assessment algorithm that consists in a direct and consistent comparison between sensor data and numerical model results, both affected by uncertainty. Such algorithm is applied to a simple concrete laboratory beam, tested till rupture, to show it feasibility and operational process. From these applications several conclusions are derived with a high value, regarding the final objective of the work, which is the implementation of this algorithm within a HMS, developed and applied into a prototype structure.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.5
• /
• pp.439-446
• /
• 2019

A real time transporter locating system for shipyard has been implemented through the GNSS and IMU sensor. There are a lot of block movements by transporters at the shipyard, which need to be controlled and monitored for conforming to the shipbuilding process. For the precise and safe transporter motion at the yard, a locating system has been developed by using the GNSS and IMU sensors for the transporter. There are several obstacles of the GPS signals for locating the transporter at the yard, such as, buildings and metal structures. To overcome the weakness of the GPS signal transmission, the IMU data have been properly integrated together. The performance of the proposed real time block locating system has been verified through the real experiments with transporters carrying blocks at a shipyard.

• Journal of the Korean Geophysical Society
• /
• v.8 no.2
• /
• pp.97-103
• /
• 2005

It is necessary, in the light of the importance of long-term slope stability problem, to develop a simple method or tool which can figure out the possible failure zone resulted from weathering effect and other factors. The FBG sensor system is used to estimate the correlations between the temperature and the slope in Yunhwajae, and to find a failure zone in slopes effectively. This research is to seek for the correlation between the soil temperature distribution and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the correlation. The zone of high temperature fluctuation can be regarded as one of the possible sliding zone due to the weathering effect while the constant temperature depth of the ground, if exists, would not be relatively affected by the weathering process.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.3
• /
• pp.253-262
• /
• 2014

3D city model, which consisted of the 3D building models and their geospatial position and orientation, is becoming a valuable resource in virtual reality, navigation systems, civil engineering, etc. The purpose of this research is to propose the new framework to generate the 3D city model that satisfies visual and physical requirements in ground oriented simulation system. At the same time, the framework should meet the demand of the automatic creation and cost-effectiveness, which facilitates the usability of the proposed approach. To do that, I suggest the framework that leverages the mobile mapping system which automatically gathers high resolution images and supplement sensor information like position and direction of the image. And to resolve the problem from the sensor noise and a large number of the occlusions, the fusion of digital map data will be used. This paper describes the overall framework with major process and the recommended or demanded techniques for each processing step.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.445-452
• /
• 2010

In this paper, an attempt has been made to design the controller applicable for H.264 level3 encoder of baseline profile on full hardware basis. The designed controller module first stores the images supplied from CMOS Image Sensor(CIS) at main memory, and then reads or stores the image data in macroblock unit according to encoder operation. The timing cycle of the DMA controller required to process a macroblock is 478 cycles. In order to verify the our design, reference-C encoder, which is compatible to JM 9.4, is developed and the designed controller is verified by using the test vector generated from the reference C code. The number of cycle in the designed DMA controller is reduced by 40% compared with the cycle of using Xilinx MIG.