• 한국음향학회지
• /
• 제24권2호
• /
• pp.87-96
• /
• 2005

해양환경에서 정합장처리를 통해 음원위치를 추정할 경우 실측신호의 음장과 복제음장 사이에 각종 매개변수의 오정합이 발생하여 상관값의 저하와 함께 음원 위치추정 결과에 바이어스를 발생시킨다. 본 논문에서는 정합장처리를 이용한 음원 위치추정에서 해양환경 및 시스템 오정합 매개변수로 인한 바이어스와 상관값의 변화 그리고 민감도에 대해서 고찰하였다. 이를 위해 Pekeris 해양 도파관에서 수치실험을 수행하였으며, 그 결과 매개변수 오정합이 음원 위치에서의 바이어스와 상관값의 감소를 발생시켰다. 또한 매개변수 민감도 평가를 통해 배열의 경사와 수심, 해저면 수심과 해저층의 음속이 민감도가 높음을 확인 할 수 있었다.

• 전자공학회논문지SC
• /
• 제43권1호
• /
• pp.21-30
• /
• 2006

IEEE 1451.4는 센서 및 액츄에이터를 위한 스마트트랜스듀서의 연결 표준안으로 정의되었다. 이 표준은 아날로그 트랜스듀서의 정보를 디지털 형태로 전송한다 이 디지털 형태의 정보를 TEDS(transducer electronic data sheet)라고 부른다. IEEE 1451.4 TEDS는 전자코 시스템에서의 어레이 센서에 대해서는 이용하기가 어렵다. 본 논문은 전자코 시스템에서 센서 인터페이스의 대한 표준화에 대해 분석해보고 새로운 방안을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.133-137
• /
• 2005

In this paper, we investigate visual and quantitative analysis of different tastes in the liquids using multi-array chemical sensor (MACS) based on the ion-selective electrodes (ISEs), which is so called the electronic tongue (E-Tongue) system. We apply the Fuzzy C-means (FCM) algorithm combined with Principal Component Analysis (PCA), which can be used to reduce multi-dimensional data to two- or three-dimensional data, to classify visually data patterns detected by E-Tongue system. The proposed technique can be determined the cluster centers and membership grade of patterns through the unsupervised way. The membership grade of an unknown pattern, which does not shown previously, can be visually and analytically determined. Throughout the experimental trails, the E-tongue system combined with the proposed algorithms is demonstrated robust performance for visual and quantitative analysis for different tastes in the liquids.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.252-252
• /
• 2008

The microhotplates consisting of a Pt-ased heating element on AlN/poly 3C-SiC layers were fabricated. The microhotplate has a $600{\mu}m{\times}600{\mu}m$ square shaped membrane which made of $1{\mu}m$ thick ploycrystalline 3C-SiC suspended by four legs. 3C-SiC is known for excellent chemical durability, mechanical strength and sustaining of high temperature. The membrane is fabricated by surface micromachining using oxidized Si sacrificial layer. The Pt thin film is used for heating material and resist temperature sensor. The fabrication methodology allows intergration of an array of heating material and resist temperature detector. For reasons of a short response time and a high sensitivity a uniform temperature profile is desired. The dissipation of microhotplate was examined by a IR thermoviewer and the power consumption was measured. Measured and simulated results are compared and analyzed. Thermal characterization of the microhotplates shows that significant reduction in power consumption was achieved using suspended structure.

• ETRI Journal
• /
• 제28권1호
• /
• pp.59-66
• /
• 2006

Learning behaviors of a radial basis function network (RBFN) using a singular value decomposition (SVD) and stochastic gradient (SG) algorithm, together named RBF-SVD-SG, for odor sensing systems are analyzed, and a fast training method is proposed. RBF input data is from a conducting polymer sensor array. It is revealed in this paper that the SG algorithm for the fine-tuning of centers and widths still shows ill-behaving learning results when a sufficiently small convergence coefficient is not used. Since the tuning of centers in RBFN plays a dominant role in the performance of RBFN odor sensing systems, our analysis is focused on the center-gradient variance of the RBFN-SVD-SG algorithm. We found analytically that the steadystate weight fluctuation and large values of a convergence coefficient can lead to an increase in variance of the center-gradient estimate. Based on this analysis, we propose to use the least mean square algorithm instead of SVD in adjusting the weight for stable steady-state weight behavior. Experimental results of the proposed algorithm have shown faster learning speed and better classification performance.

• Journal of the Optical Society of Korea
• /
• 제5권4호
• /
• pp.140-145
• /
• 2001

We present a new method of volumetric interferometer, which is intended to measure the three-dimensional coordinates of a moving object in a simultaneous way with a single optical setup. The method is based on the principles of phase-measuring interferometry with phase shifting. Two diffraction point sources, which are made of the polished ends of single-mode optical fibers are embedded on the object. Two spherical wavefronts emanate from the diffraction point sources and interfere with each other within the measurement volume. One wavefront is phase-shifted by elongating the corresponding fiber using a PZT extender. A CCD array sensor fixed at the stationary measurement station detects the resulting interference field. The measured phases are then related to the three-dimensional location of the object with a set of non-liner equations of Euclidean distance, from which the complete set of three-dimensional spatial coordinates of the object is determined through rigorous numerical computation based upon the least square error minimization.

• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1993-2001
• /
• 2006

The piezoelectric bimorph film, which, as an actuator, can generate more effective displacement than the usual PVDF film, is used to control the turbulent boundary-layer flow. The change of wall pressures inside the turbulent boundary layer is observed by using the multi-channel microphone array flush-mounted on the surface when actuation at the non-dimensional frequency $f_b^+$:=0.008 and 0.028 is applied to the turbulent boundary layer. The wall pressure characteristics by the actuation to produce local displacement are more dominantly influenced by the size of the actuator module than the actuation frequency. The movement of large-scale turbulent structures to the upper layer is found to be the main mechanism of the reduction in the wall- pressure energy spectrum when the 700$700{\nu}/u_{\tau}$-long bimorph film is periodically actuated at the non- dimensional frequency $f_b^+$:=0.008 and 0.028. The biomorph actuator is triggered with the time delay for the active forcing at a single frequency when a 1/8' pressure-type, pin-holed microphone sensor detects the large-amplitude pressure event by the turbulent spot. The wall-pressure energy in the late-transitional boundary layer is partially reduced near the convection wavenumber by the open-loop control based on the large amplitude event.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.30.2-30.2
• /
• 2010

Nano-scale p-n junction can generate various nano-scale functional devices such as nanowire light emitting diode, nanowire solar cell, and nanowire sensor. The core shell type nanowire p-n junction has been considered for the high efficient devices in many previous reports. On the other hand, although device efficiency is relatively lower, the cross bar type p-n junction has simple topological structure, suggested by C.M. Lieber group, to integrate easily many p-n junction devices in one board. In this study, for the integration of the cross bar nanowire p-n junction device, a simple fabrication route, employed dielectrophoretic array and direct printing techniques, was demonstrated by the successful fabrication and programmable integration of the nanowire cross bar p-n junction solar cell. This direct printing process will give the single nanowire solar cell the opportunity of the integration on the circuit board with other nanowire functional devices.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.1023-1025
• /
• 2012

본 연구에서는 태양광 발전의 효율을 향상시키기 위하여 발전시스템의 태양추적에 기초가 되는 태양 추적 장치를 설계하였다. 태양광발전분야에서는 셀의 발전특성 향상을 위한 연구와 함께 태양에너지의 효과적인 집광을 위한 연구가 다양하게 진행되고 있다. 일사량은 지역에 따라 차이가 발생하는 요소로 발전효율을 증대시키기 위해서는 발전 장치의 설치장소가 달라져야 한다는 제약이 있는 반면, 발전 셀 단면이 태양과 이루는 각도는 발전장치의 기구부를 회전시킴으로서 태양과 이루는 각도를 가변 할 수 있는 장치를 개발하고 실험을 통하여 발전 효율 향상 성능을 확인하였다.

• 전력전자학회논문지
• /
• 제14권4호
• /
• pp.261-267
• /
• 2009

최대전력점 추적기는 태양광 발전시스템의 대표적인 기능이다. 최대 전력점을 추종하기 위해서는 태양전지의 전압과 전류의 측정을 필요로 한다. 만약 측정 신호에 노이즈가 포함되어 있으면 발생되는 전력이 감소되어 태양광 발전의 효율이 감소하게 된다. 노이즈가 포함된 신호에 확장 칼만 필터 이론을 적용하여 최적의 추정된 신호를 얻어 낼 수 있다. 칼만 필터는 랜덤 노이즈가 포함된 신호에서 최적의 신호를 얻어내는데 사용된다. 또한 칼만 필터의 적용결과로 인덕터 전류와 같은 측정하지 않는 신호도 센서리스 추정이 가능하다. 본 논문에서는 시스템 모델링 방법과 확장 칼만 필터 설계 방법이 소개된다. 실험 결과로서 제안된 제어기의 성능을 확인하였다.