• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1081-1090
• /
• 2024

The liquid Lead-bismuth eutectic is used as the coolant for Gen-IV reactor concepts. However, due to its strong corrosive and high operating temperature, it is difficult to accurately measure the flow rate in long-term operating conditions. Venturi flowmeter is a simple structured flowmeter, which plays a very important role in the flow measurement of high-temperature liquid metals, especially since the existing flowmeters are difficult to be competent. It has the advantages of easy maintenance and stable operation. Therefore, it is necessary to study the operating conditions of the venturi flowmeter under high-temperature conditions. This work performs a series of simulations of the fluid-solid interaction between the flow liquid metal and venturi flowmeter with COMSOL software, including the dimensional sensitivity analysis of the venturi flowmeter to explore the most suitable structure and parameters for liquid heavy metal, the sensitivity analysis of the geometric parameters of the venturi tube on the varying conditions. It shows that when the contraction angle of the venturi flowmeter is 33°, the diffusion angle is 13°, the diameter of the throat is 8 mm, and the temperature of the lead-bismuth eutectic is 733.15 K, it is most suitable for the measurement in the lead-bismuth circuit.

• 환경생물
• /
• 제23권2호
• /
• pp.98-105
• /
• 2005

한국산 요시마쯔깔따구(Chironomus yoshimatsui)의 세 가지 중금속(납, 카드뮴, 수은)에 대한 급성독성 및 행동 독성을 외국 표준 실험 종인 리파리깔따구(C. riparius)와 비교하였다 48시간 및 96시간 동안 수중 노출(water-only exposure)을 시킨 후 두 가지 실험종의 반수치사농도($LC_50$)및 깔따구의 유영 능력 감소에 영향을 주는 농도($EC_{50}$)를 바탕으로 두 실험 종간의 차이를 살펴보았다. 카드뮴과 납에 대하여는 요시마쯔깔따구가 리파리깔따구에 비해 둔감한 반응을 보였으며, 수은에 대하여는 요시마쯔깔따구가 더 민감한 반응을 나타냈다. 모든 실험에서 $LC_50$값과 $EC_{50}$값의 비율이 1보다 높게 나와 사망률보다는 유영 능력을 기준으로 실시한 급성독성 평가가 더욱 민감한 결과를 얻었다. 노출 기간에 따른 급성독성 차이를 살펴본 결과 노출 기간이 길수록 급성독성 및 행동독성도 높게 나타났다.

• 센서학회지
• /
• 제6권4호
• /
• pp.274-279
• /
• 1997

$WO_{3}$ 모물질로 하여 NOx 검지센서를 제조하여 전기적 특성과 가스감지특성을 알아 보았다. $SnO_{2}$와 $TiO_{2}$를 포함한 $WO_{3}$ 후막은 동작온도 $400^{\circ}C$에서 순수한 $WO_{3}$ 후막보다 NOx가스에 대한 뛰어난 감도와 가스 흡탈착 특성을 보였다. $TiO_{2}-WO_{3}$ 후막에 Ru와 Au와 같은 귀금속 촉매를 특별히 첨가하여 제작된 센서에서는 NOx 가스에 대한 감도, 회복 속도 및 선택도 등을 더욱 개선되었다.

• 한국도시환경학회지
• /
• 제18권4호
• /
• pp.429-437
• /
• 2018

본 연구에서는 중금속(Cu, Pb, Hg)과 계면활성제(SLS, ALS)의 혼합 독성을 발광박테리아(Vibrio fischeri)와 물벼룩(Daphnia magna)를 이용하여 평가하였다. 중금속에 대한 생태독성 민감도의 경우 물벼룩이 민감하게 반응하였지만 계면활성제의 경우 발광박테리아가 더 민감하게 반응하여 시험생물종 간의 민감도 차이를 확인하였다. 발광박테리아를 이용한 혼합 독성 평가 결과 대부분 실제 실험한 독성 값 P(O)이 예측된 값 P(E)보다 낮게 나타나 중금속과 계면활성제를 혼합 시 길항효과(antagonistic effect)를 보이며, 이는 음이온 계면활성제인 SLS와 ALS가 친수성 머리 부분에 음이온 형태를 띠고 있어 양이온 형태인 중금속 이온과 결합하여 실제 독성이 낮아지는 길항효과가 나타나는 것으로 보인다. 물벼룩을 이용한 혼합 독성 평가 결과 농도가 높아질수록 길항효과(antagonistic effect), 첨가효과(additive effect), 상승효과(synergistic effect)가 순서대로 나타났다. 이는 중금속에 대한 민감도가 높은 물벼룩이 농도가 높아짐에 따라 급격히 치사율이 증가하여 상승효과가 나타난 것으로 보인다.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.65-74
• /
• 2000

The sensitivity of a mehtanogen and sulfate-reducing bacterium isolated from a sea-based landfill site Cd$^{2+}$ and CU$^{2+}$ was studied. Methanogens and sulfate-reducing bacteria in leachates of the waste disposal site were enumerated using the MPN method. Methanobacterium thermoautotrophicum KHT, isolated from the leachate, could not grow at 0.5 mM Cd$^{2+}$ or 1.0 mM CU$^{2+}$. Desulfotomaculum sp. RHT, isolated from the same leachate, was able to insolubilization 3.0 mM Cd$^{2+}$ or 2.0 mM CU$^{2+}$ by production of hydrogen sulfide. When strains KHT and RHT were cultured together in the presence of the heavy metals, strain KHT could grow at high heavy metal concentrations after insolubilization of the metals by strain RHT. strain RHT.

• 한국입자에어로졸학회지
• /
• 제10권2호
• /
• pp.53-59
• /
• 2014

Palladium (Pd) nanoparticles attached graphene (GR) composite was synthesized for an enhanced glucose biosensor. Aerosol spray pyrolysis (ASP) was employed to synthesize the GR-Pd composite using a colloidal mixture of graphene oxide (GO) and palladium chloride ($PdCl_2$) precursor. The effects of the weight ratio of the Pd/GR on the particle properties including the morphology and crystal structure were investigated. The morphology of GR-Pd composites was generally the shape of a crumpled paper ball, and the average composite size was about $1{\mu}m$. Pd nanoparticles less than 20 nm in diameter were deposited on GR sheets and the Pd nanoparticles showed clear crystallinity. The characteristic of the glucose biosensor fabricated with the as-prepared GR-Pd composite was tested through cyclic voltammetry measurements. The biosensor exhibited a high current flow as well as clear redox peaks, which resulted in a superior ability of the catalyst in terms of an electrochemical reaction. The highest sensitivity obtained from the amperometric response of the glucose biosensor was $14.4{\mu}A/mM{\cdot}cm^2$.

• 한국군사과학기술학회지
• /
• 제15권1호
• /
• pp.93-100
• /
• 2012

In this paper, the deterministic optimal design for the tail plane made of composite materials is conducted under the deterministic loading condition and compared with that of the metallic materials. Next, the reliability analysis with five random variables such as loading and material properties of unidirectional prepreg is conducted to examine the probability of failure for the deterministic optimal design results. The MATLAB programing is used for reliability analysis combined with FEA S/W(COMSOL) for structural analysis. The laminated composite is assumed to the equivalent orthotropic material using classical laminated plate theory. The response surface methodology and importance sampling technique are adopted to reduce computational cost with satisfying the accuracy in reliability analysis. As a result, structural weight of composite materials is lighter than that of metals in deterministic optimal design. However, the probability of failure for the deterministic optimal design of the tail plane structures is too high to be neglected. The sensitivity of each variable is also estimated using probabilistic sensitivity analysis to figure out which variables are sensitive to failure. The computational cost is considerably reduced when response surface methodology and importance sampling technique are used. The study of the computationally inexpensive method for reliability-based design optimization will be necessary in further work.

• 한국환경보건학회지
• /
• 제18권2호
• /
• pp.135-145
• /
• 1992

This study was carried out to find out some characteristic responses of biological samples under the exposure of trace metals with the considering of Sex, age, residence period and smoking. Blood, Urine and Hair were collected from 116 dwellers in the vicinity of a smelting factory. Cd, Cu, Pb and Zn concentrations were determined by flame atomic absorption spectrophotometry and the following results were found important. 1) The concentrations of trace metals in the blood were 0.010+ 0.003 $\mu$g/ml in Cd, 0.82+ 0.11 $\mu$g/ml in Cu, 0.23_+ 0.13 $\mu$g/ml in Pb and 5.78_+ 1.43 $\mu$g/ml in Zn, those in the urine were 1.7_+ 1.7 $\mu$g/l in Cd, 16.5_+ 16.0 $\mu$g/l in Cu, 24.6_+ 23.0 $\mu$g/l in Pb and 367.7_+ 283.4 $\mu$g/l in Zn, and those in the hair were 0.52_+ 0.56 $\mu$g/g in Cd, 11.00_+4.01 $\mu$g/g in Cu, 8.53_+ 7.05 $\mu$g/g in Pb and 383.23_+ 110.56 $\mu$g/g in Zn. 2) In sex, the concentrations of Zn in the blood and urine of male were higher than those of female, however, the concentrations of Cd and Zn in the hair of female were higher than those of male. 3) The concentrations of Cd, Pb and Zn in the urine showed an increasing trend by age. 4) While the concentration of Cd in the urine increased, the concentration of Pb in the hair decreased by residential period in all the samples. 5) The concentrations of Cd and Zn in the blood and that of Zn in the urine of smoking group were higher than those of non-smoking group. The concentration of Pb in the blood of smoking group and those of Cd, Pb and Zn in the urine of non-smoking group showed increasing the trend by age. The concentrations of Cd and Zn in the urine of non-smoking group, the concentration of Zn in the hair of smoking group showed increasing trend by residential period, however, the concentrations of Pb in the blood and hair and that of Zn in the hair showed decreasing trend by residential period. 6) When the correlations of the concentrations between Zn (main smelting metal) and other metals were analyzed, Zn in the blood was significantly correlated with Cu, Pb and Zn in the urine (positively) and Zn in the urine was significantly correlated with Zn in the blood, Cd, Cu and Pb in the urine, and Pb in the hair (positively). Zn in the hair was significantly correlated with Cd in the urine and Cu in the hair (positively). 7) Consequently, it was useful to note that samples of urine showed higher sensitivity under the metal exposure than those of blood and hair in individual sampling. In addition, as trace metals showed higher accumulation in the hair of the groups, sampling of hair was more highly recommended than those of urine and blood in group sampling.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.187-197
• /
• 2004

The purpose of this paper is to investigate economic feasibility of manganese nodules in Korea area (Clarion-Clipperton Fracture Zone). We assumed that the production scale of manganese nodules were 3.0MT or 1.5MT and analyzed that the capital cost and operating cost were estimated in the four sectors, exploration, mining, transportation and metallurgical process. The capital cost and operating cost evaluation reflects the latest technical practices. First, for analyzing economic feasibility, the scenario suggests that the production of 4 metals can be made for 25 years. Assuming the discount rate at 8.0%, equity capital at 50% and tax at 27%. When manganese nodule were mininged 3.0 MT, economic feasibility analyses showed that IRR was 12.8 and pay-back period was 9.2 years, and when manganese nodules were mininged 1.5 MT, economic feasibility analyses showed that IRR was 4.0 and pay-back period was 11.8 years. This study indicated there is economic validity of at the product of manganese nodules 3.0 MT. In addition, we carried out a sensitivity analysis at the change of cobalt price on mining 1.5 MT. The result of sensitivity analysis clearly showed that economic validity is high at increasing of cobalt price 50% up.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.413-419
• /
• 2005

The United States automotive recycling infrastructure has successfully reduced the amount of automotive waste sent to landfills, especially since the introduction of shredders in the late 1950s. Shredders are necessary to process and recycle automotive hulks and other durable goods. However, this industry faces significant challenges as the automotive manufacturers are increasing the use of nonmetallic components which are difficult to recycle. Additionally, it is becoming obvious that automobiles contain hazardous materials which place heavy burdens on the environment. To address this growing concern, we propose a process planning model for automotive shredders to make tactical decisions regarding at what level to process and at what level to reprocess feed stock materials. The purpose of this paper is to test analytical models to help shredders improve the profitability and efficiency of the bulk recycling processes for end of life automobile returns. The work is motivated by an actual recycling problem that was observed at Capitol City Metals shredding facility in Indianapolis, Indiana.