• 대한교통학회지
• /
• 제28권5호
• /
• pp.117-129
• /
• 2010

본 연구는 기존의 단일수단이 아닌 다수단 확률적 사용자 균형상태의 민감도 분석 방법을 설명한다. 다수단 교통망에서의 민감도 분석에 대한 연구의 첫 단계로 우선은 물리적으로 분리되어진 승용차 교통망과 대중교통(버스, 지하철) 교통망으로 구성된 다수단 교통망을 고려하고자 한다. 연구는 우선 승용차와 대중교통 교통망의 임의의 링크 변수에 대한 민감도 분석 방법을 정립하고 실질적인 링크 변수의 적용으로 링크용량과 대중교통 노선빈도에 대한 민감도 분석을 수행해본다. 다음으로 승용차 수단분담율과 대중교통 수단분담율에 대한 민감도 분석 방법을 정립한다. 본 연구의 결과는 경제학의 탄력성과 같이 교통시설의 운영 및 정책변화에 따른 통행자의 행태 변화와 운영 및 정책 효과를 분석해 볼 수 있는 중요한 정보가 될 수 있을 것이다. 또한 협력적 게임의 다수단 교통망 설계 문제를 구성하기 위한 중요한 도구로 활용될 수 있을 것이다.

• 치위생과학회지
• /
• 제21권4호
• /
• pp.213-218
• /
• 2021

Background: The purpose of this study is to identify the gender sensitivity and gender role stereotypes of students in dental hygiene and to provide basic data to expand social awareness of equal gender sensitivity and gender role in dental hygiene and students by identifying the degree of correlation. Methods: The purpose of this study was to study dental hygiene students at colleges in Gyeonggi and Chungcheong areas. The survey was conducted from April 1 to April 30, 2021. The final sample was analyzed on 157 subjects. T-test and ANOVA analysis were performed to compare gender sensitivity and gender role stereotypes according to general characteristics. Equal variances were tested using the Levene statistic, and significant differences between groups were identified through Scheffe's post hoc analysis. Pearson's correlation analysis was performed to confirm the correlation between gender sensitivity and gender role stereotypes. Results: Gender sensitivity was 2.69 and gender role stereotypes were 1.83. Among the sub-areas of gender sensitivity, gender role openness was the highest at 2.86, and non-violence was the lowest at 2.50. As for gender role stereotypes, social stereotypes were the highest among sub-areas at 1.71. Among the general characteristics, there was a statistically significant difference in gender sensitivity according to the presence or absence of opposite sex friends (p=0.011). The gender identity openness of gender sensitivity and the physical sub-areas of gender role stereotypes showed the highest positive correlation(r=0.955). Among the sub-areas of gender sensitivity, gender role openness and domestic stereotypes showed the lowest negative correlation (r=-0.404) among the sub-areas of gender role stereotypes. Conclusion: Dental hygiene students should be able to critically analyze and solve problems of not only sexual violence but also gender discrimination and imbalance in social life. For this, environmental factors such as school education and professor guidance must be strengthened.

• 소음진동
• /
• 제8권2호
• /
• pp.267-273
• /
• 1998

This study aims at performing sensitivity analysis of piezoelectric smart structure for minimizing radiated noise from the structure, The structure consists of a flat plate on which disk shaped piezoelectric actuator is mounted, and finite element modeling is used for the structure. The finite element modeling uses a combination of three dimensional piezoelectric, flat shell and transition elements so thus it can take into account the coupling effects of the piezoelectric device precisely and it can also reduce the degrees of freedom of the finite element model. Electric potential on the piezoelectric actuator is taken as a design variable and total radiated power of the structure is chosen as an objective function. The objective function can be represented as Rayleigh's integral equation and is a function of normal displacements of the structure. For the convenience of computation, all degrees of freedom of the finite element equation is condensed out except the normal displacements of the structure. To perform the design sensitivity analysis, the derivative of the objective function with respect to the normal displacements is found, and the derivative of the norma displacements with respect to the design variable is calculated from the finite element equation by using so called the adjoint variable method. The analysis results are compared with those of the finite difference method, and shows a good agreement. This sensitivity analysis is faster and more accurate than the finite difference method. Once the sensitivity analysis program is used for gradient-based optimizations, one could achieve a better convergence rate than non-derivative methods for optimal design of piezoelectric smart structures.

• 소음진동
• /
• 제8권4호
• /
• pp.609-615
• /
• 1998

In recent years there has been an increasing emphasis on shortening design cycles for bringing products to market. This requires the development of computer aided engineering tools which allow analysts to quickly evaluate the effect of design changes on noise, vibration, and harshness. Statistical Energy Analysis (SEA) modeling is a valuable tool for predicting noise and vibration as SEA models are inherently simpler and more robust than deterministic models. SEA modeling can be combined with design sensitivity analysis(DSA) to identify design changes which give the largest performance benefit. This paper describes SEA modeling of an equipment cab. SEA predictions are compared to test data, showing good agreement. The use of design sensitivity analysis in improving cab design is then demonstrated.

• The Journal of the Acoustical Society of Korea
• /
• 제19권3E호
• /
• pp.3-11
• /
• 2000

A structural modification technique for reducing structure-borne noise of vehicles using a sensitivity analysis is suggested. To estimate the noises generated by the vibration response, a semi structure-acoustic coupling analysis was exploited. As a result of the coupling analysis, severe noise generating positions are identified whose vibrations should be cured through structural modifications. Formulation for the sensitivity analysis of those severe vibration responses with respect to the design changes is derived to enhance the vibration response. Special attention is given in this paper to the use of the experimentally measured vibration responses in the sensitivity analysis. As a result of the proposed method, the structural modifications can be peformed accurately by using experimental data instead of using the finite element method though the higher vibration modes are considered as long as the vibration measurement and acoustic mode calculations are accurate. Effectiveness of this method was examined using an example model by experiments.

• Structural Engineering and Mechanics
• /
• 제78권1호
• /
• pp.77-86
• /
• 2021

Local school buildings are critical facilities that can provide shelter in disasters such as earthquakes, so they must be more resistant to seismic forces than other structures. In this study, a sensitivity analysis was conducted to determine which columns-as the most critical members in a reinforced concrete building-most urgently require seismic retrofitting. The sensitivity analysis was conducted using an optimization technique with the location of each column as a parameter. A numerical model was developed to simulate a realistic collapse mode through a three-dimensional dynamic analysis. Based on numerical analysis results, it was found that the columns positioned in the lower floors, such as the first floor and in the outer part of a building, urgently require retrofitting. For reinforcement of the RC columns, which has been proven for its performance in previous research, was applied. Through this study, the importance of appropriate retrofitting is demonstrated. Further, a method for determining the appropriate location for retrofitting-when retrofitting is not possible on the entire structure-is presented.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.50-55
• /
• 2003

This study proposed the analysis of damage detection due to the change of the stiffness of structure by using the original and modified dynamic characteristics. The present approach allows the use of composite data which consist of eigenvalues and eigenvectors. The suggested method is applied to examples of a cantilever and 3 degree of freedom system by modifying the stiffness. The predicted damage detections are in good agreement with these from the structural reanalysis using the modified stiffness.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.160-167
• /
• 2001

Cracking in connote structures is one of the main issues of structural design next to ensuring the load-bearing capacity. Thermal analysis is used to prevent thermal mucking, but concrete properties are uncertain variable, and analysis results have uncertainty, too. In this study, sensitivity analysis is performed to investigate the effect of conductivity, specific heal and pouring temperature. The results show that lower conductivity and higher specific heat increase the maximum temperature and maximum tensile stress. The structure with internal restraint is mostly influenced by the change of conductivity and specific heat.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.644-645
• /
• 2007

In this paper, the eigenvalue sensitivity analysis algorithm in discrete systems by the RCF method are presented and applied to the power system including TCSC. The RCF analysis method enabled to precisely calculate eigenvalue sensitivity coefficients of dominant oscillation modes after periodic switching operations. These simulation results are very different from those of the conventional continuous system analysis method such as the state space equation method

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.491-495
• /
• 1997

In this paper, an effective mount design method using vector synthesis is presented for two mount systems. For designing mount stiffnesses effectively, we perform a sensitivity analysis, i.e, identify the contribution rate of an input component vector to the total output vector. Especially, we show that it is necessary to takea phase sensitivity into consideration in case of two mount systems, such as the excavator mount systems having engine mounts and cabin mounts. THe proposed method is testified is testified through an test bed.