• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.13-17
• /
• 1997

This paper investigates the influence of material properties of the acoustic damping layer in the low noise hydrophone designed in the previous paper. For increase of the insensitivity of the hydrophone to external noises, acoustic impedance and damping coefficients are selected and the effects of the selected material property on the hydrophone response to the external noises are simulated with finite element method (FEM). The results show that the damping coefficients are not influential to the structural vibration decoupling from the sensing element. On the other hand, the optimum acoustic impedance of compliant layer is estimated which is smaller than 1 Mrayl or larger than 4 Mrayl. However polymer materials, which are in general use for acoustic window and damping layers, is not appropriate for the compliant materials of this hydrophone. Therefore development of new composite materials, i.e. ceramic-polymer composite or metal-ceramic composites etc., is required for the development of effective self noise suppressing underwater hydrophones.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.199-205
• /
• 2003

In this paper, CSMA/CA protocol is modified for aeronautical VHF communication through collision alleviation and the change of retransmission slot selection method in flag used transmission. When collision occurred in the contention period of CSMA/CA process, it is generally waiting for retransmission delay and it has the double size of CW(Contention Window). To solve this problem, this paper modifies the change procedure of original contention window size and reduces the state transition in collision among the whole of it. Also, in this paper we reduces the second collision probability through the station has to enter Backoff mode with increased contention window in the first collision. In the result of simulation, it is verified that it has good property in throughput and delay, So the proposed protocol is suitable for aeronautical VHF communication.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.96-100
• /
• 2004

Optical fiber sensors have been used to detect small amounts of chemical species. In this work, a new thin polymer-clad fiber sensor is developed. Polyaniline is chemically synthesized and thin clad layers of the polymer are easily deposited on optical fiber by dip-coating technique. The optical property of polyaniline as a sensing material is analyzed by UV-Vis-NIR. The light source is stabilized He-Ne laser at 635 nm wavelength with 1 mW power. The light power transmitted through the optical fiber is measured with a spectrophotometer. By selecting a fixed incident angle, variation of transmitted light intensity through the optical fiber can be detected as gas molecules absorbed in the polyaniline clad layer. Among the various gases, the fabricated optical fiber sensor shows good sensitivity to $NH_{3}$ gas. The optical fiber sensors was shown more improved properties than polymer based sensors which measure conductivity changes.

• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.266-269
• /
• 2020

In this study, we investigated the effect of a sulfur passivation (S-passivation) process step on the electrical properties of surface-channel In_0.7Ga_0.3As quantum-well (QW) metal-oxide-semiconductor field-effect transistors (MOSFETs) with S/D regrowth contacts. We fabricated long-channel In_0.7Ga_0.3As QW MOSFETs with and without (NH₄)₂S treatment and then deposited 1/4 nm of Al₂O₃/HfO₂ through atomic layer deposition. The devices with S-passivation exhibited lower values of subthreshold swing (74 mV/decade) and drain-induced barrier lowering (19 mV/V) than the devices without S-passivation. A conductance method was applied, and a low value of interface trap density D_it (2.83×10¹² cm^-2eV^-1) was obtained for the devices with S-passivation. Based on these results, interface traps between InGaAs and high-κ are other defect sources that need to be considered in future studies to improve III-V microsensor sensing platforms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.11
• /
• pp.1205-1216
• /
• 2015

Since concentration of greenhouse gas increases continuously from human's fossil fuel use, urbanization, and cultivation, it is trend that climate change is appearing. In Addition, in 20th century, occurrence of disaster is accidental and huge, and damage level also increases gradually. Therefore, in order to preserve the territory and to protect people's life and property against new type disasters, disaster detection satellite (payloads) development is required urgently. In this paper, we conduct a research and development for the prompt preemptive action when occurred a disaster, in particularly, about the disaster observation optimized at Korea's geographical features for the irregular future disasters. For the payload design which is specialized detect disasters, we create a tech tree of satellite imagery applications based 10 disaster types, and analyze the satellite sensor technologies referred to Landsat-8, Worldview-3 and ALOS-2.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.44-55
• /
• 2008

Catalyzed by the recent development of space technology, various kinds of spacecrafts were launched and utilized with purposes in many developed countries. In case of emergency such as natural disasters, proper satellite images are required in order to help to mitigate and assess the effects of disasters on human life and property. Since there are limitations for a nation to single-handedly operate a satellite and fulfill complete demands, a development need of international cooperation organization to share satellite images among the member countries has risen. In this paper, preestablished four international organizations' background, objectives, and operating system, and their principal characteristics were analyzed and compared. Especially, the paper has focused on the analysis of on-going operating procedures and its cases for International Charter, UN SPIDER's development of local supporting network to support NFP, establishment of Web-GIS by Sentinel Asia under the goal of 'Digital Asia', and the utilization of GEO that is widely applied in natural disaster fields.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.104-107
• /
• 2001

The fabricated La-modified lead titanate (PLT) thin flim without paling treatment was investigated for modulation frequency dependence of pyroelectric properties by the dynamic method. $Pb_{1-x}La_{x}Ti_{1-x/4}O_{3}$ PLT (x=0.1) thin film having 10 mol% La content was deposited on a $Pt/TiO_{x}/SiO_{2}/Si$ substrate by sol-gel method. The PLT(10) thin film exhibits a relatively excellent dielectric property. The pyroelectric coefficient (p) of the PLT(10) thin film is $6.6{\times}10^{-9}C/cm_{2}\cdot K$ without frequency dependence. The figure of merits for the voltage responsivity and specific detectivity are $1.03{\times}10^{-11}C\cdot cm/J$ and $1.46\times 10^{-9}C\cdot cm/J$, respectively. The PLT(10) thin film has voltage responsivity (Rv) of 5.15 V/W at 8 Hz. Noise equivalent power (NEP) and specific detectivity (D*) of the PLT(10) thin film are$9.93{\times}10^{-8}W/Hz^{1/2}$ and $1.81\times 10^{6}cmHz^{1/2}/W$ at the same frequency of 100 Hz, respectively. The results means that PLT thin film having 10 mol % La content is suitable for the sensing materials of pyroelectric IR sensors.

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.36-51
• /
• 2000

Almost every year, Korean suffered from the repetitive natural disasters such as typhoons and floods. During last 10 years, Korea experienced annual average of $50 million property damages caused by inundation. To estabilish the flood disaster counter plan, knowledge for flood damage causes based on the field investigations of inundated area is required. The field investigations is focused on technique to document and analyze the meteorological conditions leading to torrential rains, the causes and patterns of flooding, the performance of flood control structures in affected areas, the extent damages and the effectiveness of local emergency response and recovery actions. We did comparative analysis of field investigation techniques. As a major goal of flood hazard map design, one of non structural disaster countermeasures, it was expected to reduce flood damage losses by requiring local governments to implement land-use regulation that would result in safe building practices in flood hazard areas. This requires local governments to develop flood hazard maps to assess how to manage particularly vulnerable floodplain areas. In this study we suggested a design manual and the management system of flood hazard map.

• Journal of Sensor Science and Technology
• /
• v.24 no.1
• /
• pp.41-46
• /
• 2015

In this work, pure hierarchical ZnO structure was prepared using a simple hydrothermal method, and Ag nanoparticles doped hierarchical ZnO structure was synthesized uniformly through photochemical route. The reduced graphene oxide (rGO) has been synthesized by typical Hummer's method and reduced by hydrazine. Prepared Ag/ZnO nanostructures are uniformly dispersed on the surface of rGO sheets using ultrasonication process. The synthesized samples were characterized by SEM, TEM, EDS, XRD and PL spectra. The average size of prepared ZnO microspheres was around $2{\sim}3{\mu}m$ and showed highly uniform. The average size of doped-Ag nanoparticles was 50 nm and decorated into ZnO/rGO network. The $C_2H_2$ gas sensing properties of as-prepared products were investigated using resistivity-type gas sensor. Ag/ZnO-rGO based sensors exhibited good performances for $C_2H_2$ gas in comparison with the Ag/ZnO. The $C_2H_2$ sensor based on Ag/ZnO-rGO had linear response property from 3~1000 ppm of $C_2H_2$ concentration at working temperature of $200^{\circ}C$. The response values with 100 ppm $C_2H_2$ at $200^{\circ}C$ were 22% and 78% for Ag/ZnO and Ag/ZnO-rGO, respectively. In additions, the sensor still shows high sensitivity and quick response/recovery to $C_2H_2$ under high relative humidity conditions. Moreover, the device shows excellent selectivity towards to $C_2H_2$ gas at optimal working temperature of $200^{\circ}C$.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.629-632
• /
• 2007

While conventional interferometric SAR (InSAR) technique is an excellent tool for displacement observation, it is only sensitive to one-dimensional deformation along the satellite's line-of-sight (LOS). Recently, a multiple aperture interferogram (MAI) technique has been developed to overcome this drawback. This method successfully extracted along-track displacements from InSAR data, based on split-beam InSAR processing, to create forward- and backward- looking interferograms, and was superior to along-track displacements derived by pixel-offset algorithm. This method is useful to measure along-track displacements. However, it does not only decrease the coherence of MAI because three co-registration and resampling procedures are required for producing MAI, but also is confined to a suitable interferometric pair of SAR images having zero Doppler centroid. In this paper, we propose an efficient and robust method to generate MAI from interferometric pair having non-zero Doppler centroid. The proposed method efficiently improves the coherence of MAI, because the co-registration of forward- and backward- single look complex (SLC) images is carried out by time shift property of Fourier transform without resampling procedure. It also successfully removes azimuth flat earth and topographic phases caused by the effect of non-zero Doppler centroid. We tested the proposed method using ERS images of the Mw 7.1 1999 California, Hector Mine Earthquake. The result shows that the proposed method improved the coherence of MAI and generalized MAI processing algorithm.