• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.100-109
• /
• 1994

In this study, it is investigated that the possibility of the numerical simulation for the incineration of the hazardous material, crbon tetrachloride($CCl_4$). A 3-dimensional numerical technology is applied for turbulent reacting flows of the full-scale Dow Chemical incinerator. The calculations are made by a CRAY-2S, super computer. The major parameters considered in this study are kiln revolution rate (rpm), filling ratio of the solid waste(f), burner Injection velocity and angle, and turbulent air jets for swirl. And the employed turbulent reaction model is the eddy break-up model which is a kind of fast chemistry model assuming general equilibrium and used for a premixed flame. The calculated flow fields are presented and discussed. 1) The presence of turbulent air nozzles for swirl gives rise to visible increase of the convective motion over the region of the solid waste. This implies the possibility to enhance the mixing of the waste with the surrounding all and thereby to reduce thermal and species stratification, which were reported in a large rotary kiln operation. 2) Considering that the location of the recirculation region has a strong relation with the heating rate of the solid waste, the control of the recirculation region by the burner injection angle Is quite desirable in the sense of the flexible design of the rotary kiln incinerator for a carbon tetrachloride. 3) Finally, it is found that the eddy break-up model Is not suitable for carbon tetrachloride($CCl_4$) because this model is not incorporated the flame inhibition trend due to the presence $CCl_4$compound.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.13-26
• /
• 2014

The purpose of this study is to identify characteristics of the landscape changes in Gwangjyu city and Icheon city, the suburban areas on the outskirts of the Seoul metropolitan area, by focusing on the causes of the urban sprawl and the resultant morphological characteristics of landscape degradation. Particular attention has been given to the 'advantages for developing suburb including geographical proximity and land price', 'institutional regulation such as land-use regulation' and 'community solidarity' as drivers for possible introduction of external factors. The types of landscape change were divided into three, after having on-the-ground research on eleven chosen towns and interviews with head of a village: Overwhelming Change, Separated and Small-Scale Change. It was found that, in general, the quality of landscape was best for the small-scale change type, followed by separated and overwhelming change types. While the types of landscape change are correlated with the geographical proximity, its relevance with land regulation is relatively weak. The study found that imposing a land-use regulation as a means to prevent changes in suburban village landscape may not be fully effective. Also it analyzed that villages could better manage with keen interest the surrounding landscape if there is a high degree of solidarity within the village community. Therefore, the sense of community could play an important complementary role to land-use regulation which does not suffice in itself to manage suburban landscape.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.98-103
• /
• 2010

The design disaster prevention of first consideration is security for the people in the buildings. However, it is difficult to make a project for considering variable cases, declined visibility of smoke, distance from another person, mentality, knowledge of clearway etc. This study purpose is, analysis variable cases and modularization of pattern movement to practice basic information for evacuation of simulation which is used RTLS (Real Time Location System) system. It is useful to sense the electric waves from the Tag and grasp the real-time position. The pattern movement of evacuation were analyzed prescription eyeglasses which is used RTLS system to consider following 3 actions; analysis of relations that declined visibility effect the decline of movement velocity, analysis rate of flow with the size of door to estimate the optimum size of door in building and analysis the pattern movement that a bottleneck situation with abundant of people passed together to these exit. The confirmed of propriety of the interpretation about the actual people to evacuate is expected applying the numerical formula in various situation.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.25-31
• /
• 1981

One of the most important factors for successful endodontic therapy is an accurate length determination of physiological root apex. Some methods suggested for the measurement of root canal length, include digital-tactile sense and roentgenographic technique with measuring wire, scale and grid. But these methods do not derermine an accurate working length to physiological root apex. Recently electronic measuring devices are used to locate the physiological root apex in root canal length determination and these devices are accepted as an effective apparatus. The 89 patients (116 teeth, 144 canals) among the out-patients of Yonsei University Dental Infirmary, who had had an endodontic treatment in the Department of Operative Dentistry, were measured by the Root-Canal Meter$^{(R)}$ as an electronic device, and radiographs to determine the distribution and location of physiological root apex, then the following results were made: (1) Range of ${\pm}$1mm from the radiographic root apex were present in 88.88% (128 canals) of the subjects. (2) Physiological root apex and radiographic root apex were coincided in 31.94% (46 canals) of the subjects. (3) The actual length of the physiological root apex of the teeth were as follow; A : in the maxillary central incisor : 0.46mm B : in the maxillary lateral incisor : 0.44mm C : in the maxillary canine : 0.44mm D : in the maxillary 1st premolar : a) Buccal : 0.59mm b) Lingual : 0.34mm E : in the maxillary 2nd premolar : 0.54mm F : in the maxillary 1st molar : a) Mesio-buccal : 0.50mm b) Disto-buccal : 0.42mm c) Lingual : 0.56mm G : in the mandibular central incisor : 0.62mm H : in the mandibular lateral incisor : 0.45mm in the mandibular canine : 0.54mm J : in the mandibular 1st premolar : 0.47mm K : in the mandibular 2nd premolar : 0.34mm L : in the mandibular 1st molar : a) Mesio-buccal : 0.54mm b) Mesio-lingual : 0.31mm c) Distal : 0.37mm.

• Journal of Fashion Business
• /
• v.25 no.1
• /
• pp.51-64
• /
• 2021

The purpose of this study was to develop smart bags that combining fashion-specific trends and smart information technologies such as light-emitting diodes(LED) and optic fibers by grafting marquage techniques that have recently become popular as part of eco-fashion. We applied e-textiles by designing leather tote bags that could show off LED luminescence. A total of two tote bags, a white-colored peacock design and a black-colored paisley design, divided the LED's light-emitting method into two types, incremental lighting and random light-emission to suit each design, and the locations of the optical fibers were also reversed depending upon the design. The production of circuits for the LEDs and optical fibers was based on the design, and a flexible conductive fabric was laser-cut instead of wire line and attached to the circuit-line location. A separate connector was underwent three-dimensional(3D)-modeling and was connected to high-luminosity LEDs and optic fiber bundles. The optical fiber logo part expressed a subtle image using a white-colored LED, which did not offset the LED's sharp luminous effects, suggesting that using LEDs with fiber optics allowed for the expression of each in harmony without being heterogeneous. Overall, the LEDs and fiber optic fabric were well-harmonized in the fashion bag using marquage techniques, and there was no sense of it being a mechanical device. Also, the circuit part was made of conductive fabric, which is an e-textile product that feels the same as a thin, flexible fabric. The study confirmed that the bag was developed as a smart wearable product that could be used in everyday life.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.143-152
• /
• 2014

In this study, the sensor response and sensitivity is experimented and analyzed quantitatively by the line numbers of chlorine ion reaction type corrosion sensor that is developed. The sensor response of the developed corrosion sensor is verified with properties of chlorine ion. The multilineal sensor is shown a large resistance change more than the single line sensor by damage of the sensor. And, the resistance change of sensor is as large as high concentration of NaCl aqueous solution, the sensitivity of multilineal sensor is higher than single line sensor's, and the depth of sensor's location is as large as the increasing of resistance change time (cycle). These results suggest that, the developed corrosion sensor could sense corrosion reaction, sensor sensitivity and change of resistance for chloride ion. Especially, It was judged that 7 line sensor was the most superior for monitoring chloride ion immigration into concrete.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1
• /
• pp.47-53
• /
• 1997

This paper concerns an efficient approach to forming a beam pattern of a microphone array to deal with broadband signals such as speech in a teleconference. A numerical method is proposed to find updated location of sidelobes for equalizaing the sidelobes via perturbation of array parameters such as array weight or microphone spacing. Thus the microphone array is optimized in a Dolph-Chebyshev sense such that directional or background noises incident in an array visual range are eliminated efficiently. It is shown that perturbation of microphone spacing yields an optimum pattern more appropriate for dealing with broadband signals than that of array weight. Also, a novel method is proposed to find a beam pattern which is robust with respect to sidelobe in a scanning situation. Computer simulation results are presented.

• Journal of Korea Game Society
• /
• v.8 no.4
• /
• pp.65-73
• /
• 2008

In this paper, we designed and implemented edutainment platform that can be effectively applied to developmental disabilities for their education and treatment of sensibility and intelligence training. We developed embedded hardware and contents authoring tool to make multimedia contents operated on the hardware, a management tool to provide result of training, and a real-time monitoring tool for observing the state of study. The hardware is designed by considering the characteristics of developmental disabilities and provides visual, auditory and tactile sense to assist sensibility training for their attention. User-friendly and easy-to-use authoring tool enable teachers and non-specialist to make educational contents. Also the real-time monitoring tool make us to observe user's status even in the outside of classroom. The management tool stores result of training and make us to review the result for further steps. Using this edutainment platform, efficient repetitive training is possible without restriction of time and location. Also when it applied to practical education, we can recognize that our system is effective on improving the ability of attention and studying.

• The Research Journal of the Costume Culture
• /
• v.25 no.4
• /
• pp.519-528
• /
• 2017

Mobile shoppers have encountered frequent color mismatch in the products that they have purchased, as they can only rely on their sense of sight. Therefore, fabric color and color difference recognized by smartphone display during mobile shopping were studied using instrument analysis method. It aimed to gather precise information on actual fabric color understanding of the mobile shoppers purchasing textile products. Three smartphones were selected from LG, Samsung, and Apple companies, and four colors were researched (red, yellow, green and blue) to both polyester and wool test fabrics for color analysis though color measuring instruments. The results from the spectrophotometer indicated that the color coordinate location of smartphone fabric color is similarly distributed regardless of the type of fabric. The Samsung smartphone displays a relatively high color chroma (especially on red-colored fabric) regardless of the type of fabric due to a high color reproduction range. In contrast, the LG smartphone, which has high color temperature, displays high color chroma on the blue colored fabric with a significant color mismatch between the actual fabric color and smartphone fabric color. From the results of this study, issues related to mobile shopping can be addressed through an analysis of the products sold, the smartphone's color representation, and user understanding.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.194-199
• /
• 2019

Natural disasters destroy decades of human effort and investments, thereby placing new demands on society for reconstruction and rehabilitation. In most case, the natural phenomena triggering the disasters are beyond human control. In order to solve the problems that the information resources can not be shared among disaster management sectors and their work is hard to be coordinated in city, an idea of application of ubiquitous sense network and ICT technology to model the architecture of the disaster prevention system based on the analysis of characteristics of disasters. The proposed algorithm simulated that it is possible to locate the terminal by linking the direction angle and the estimated position that can be confirmed at the time of stopping, even if the movement direction of the terminal does not move in a certain direction with only a smaller number of mobile base stations. We also confirmed that the proposed algorithms analyzed through simulation are more efficient than existing algorithms.