• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.767-776
• /
• 2014

Changes in climate have largely increased concentrated heavy rainfall, which in turn is causing enormous damages to humans and properties. Floods are one of the most deadly and damaging natural disasters known to mankind. The flood forecasting and warning system concentrates on reducing injuries, deaths, and property damage caused by floods. Therefore, the exact relationship and the spatial variability analysis of hydrometeorological elements and characteristic factors is critical elements to reduce the uncertainty in rainfall-runoff model. In this study, grid resolution depending on the topographic factor in rainfall-runoff models presents how to respond. semi-distribution of rainfall-runoff model using the model GRM simulated and calibrated rainfall-runoff in the Gamcheon and Naeseongcheon watershed. To run the GRM model, input grid data used rainfall (two event), DEM, landuse and soil. This study selected cell size of 500 m(basic), 1 km, 2 km, 5 km, 10 km and 12 km. According to the resolution of each grid, in order to compare simulation results, the runoff hydrograph has been made and the runoff has also been simulated. As a result, runoff volume and peak discharge which simulated cell size of DEM 500 m~12 km were continuously reduced. that results showed decrease tendency. However, input grid data except for DEM have not contributed increase or decrease runoff tendency. These results showed that the more increased cell size of DEM make the more decreased slope value because of the increased horizontal distance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.221-228
• /
• 2014

The color and shape of the tongue reflect the physiological and clinico-pathological condition of the body. Recently, various tongue image acquisition devices have been developed for accurate diagnosis based on quantitative and objective tongue features. Since a color information is essential for tongue diagnosis, the performance of an illuminator is very important for the tongue image acquisition device. In this study, we developed an indirect illumination, which is possible to improve a homogeneity of light intensities on the tongue surface, and evaluated its performances. In order to realize the indirect illumination (II), a semi-ellipsoidal solid structure (SESS) for the light reflex was located in the system, and two high-brightness white LEDs were placed for illuminating the areas under frontal camera in the SESS. The tongue surface was illuminated by reflected light from the SESS. The light homogeneity induced by three different illuminations including the II was evaluated by calculating coefficient of variation (CV) of illuminance of five regions. The II showed less than 0.01 of CV and the direct illumination (DI) and the direct illumination with a light diffusion plate (DILDP) showed 0.16 and 0.13, respectively. The reflexed pixel ratios of tongue phantom images show 5.76%, 4.22%, 1.79% for the DI, the DILDP and the II, respectively. The homogeneity of a tongue phantom was evaluated by calculating CV of mean pixel values of six different tongue regions, and showed less than 0.06 in the II. If the II technique apply to tongue diagnosis system, it is expected to improve diagnostic accuracy in clinic.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.482-487
• /
• 2009

The apple rootstock M.26 (Malus pumila) is very popular apple rootstock with semi-dwarf habit and the trees on M.26 produce high quality fruit at a young age. Since it is prone to poor prop ability to soil, however, young trees require staking in windy locations. The rolC gene was introduced into M.26 by Agrobacterium tumefaciens LBA4404 harboring pBI121 to obtain its transformants with dwarfism and enhanced rooting ability. One regenerated transgenic line was confirmed by polymerase chain reaction (PCR) analysis and Southern blot analysis of genomic DNA for the existence of rolC gene. The characteristics of transgenic line in vitro were not significantly different from non-transgenic line except for the active root formation and lateral root number. The rolC transgenic line showed reduced stem length and increased root number in vitro. Rooting ability was examined in the isolated greenhouse after mound layering. Compared to non-transgenic M.26, rolC transgenic line showed significantly higher rooting ability. The transgenic line did not show any other observable variation in shoot phenotype compared with non-transgenic line excepting increased branching

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.893-901
• /
• 2017

In order to understand the fluctuation characteristics of water temperature in August, water temperature, tide level, air temperature and wind data were analyzed using a power spectrum and coherence analysis for a region off the southern coast of Korea. Spectrum analysis showed that the water temperature and tide level in Wando, Goheung, Yeosu, Tongyeong and Masan have peaks over a semi-diurnal period. Coherence showed that water temperature was affected by tide in Wando, Goheung, Yeosu and Tongyeong where tidal range is relatively high. In Masan and Busan, where tidal range is relatively low, however, the tide did not affect water temperature significantly. In particular, wind was the most important factor in relation to water temperature in Masan. Time lags were calculated from phase. In Wando, water temperature decreased 1.5 hrs after a flood tide began. Water temperature decreased 0.3 hrs after a flood tide began in Goheung and Tongyeong. In Masan, water temperature increased 3 hrs after a south wind began. Water temperature in Yeosu was affected by tide, but air temperature, tide and wind in Busan affected water temperature very little.

• Composites Research
• /
• v.32 no.5
• /
• pp.229-236
• /
• 2019

In this study, the effects of the additional processing parameters on the mechanical properties of thermoplastic composites fabricated with automated fiber placement (AFP) were evaluated. Annealing and vacuum bag only processes were then performed on the manufactured thermoplastic composites, respectively. For verification, the crystallinity was measured by differential scanning calorimetry (DSC), confirming the variation of semi-crystalline thermoplastic composite according to the process conditions. The void content of thermoplastic composites was evaluated by matrix digestion method while microscopic examination confirmed the porosity distribution. The interlaminar shear strength test was conducted for three different process parameters (VBO, annealing, and no treatment). A comparison of the three tested strengths was made, revealing that the porosity value had larger effect on the mechanical properties of the thermoplastic composite compared to the degree of crystallinity. Additionally, when thermoplastic composite melted up, the pores were continuously removed under vacuum process; the removal of the pores resulted in an increase of the interlaminar shear strength.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.3
• /
• pp.167-174
• /
• 2022

This study investigates the behavior of a jointless bridge that integrates superstructure and abutment without an expansion joint. Based on the sensitivity analyses conducted in previous studies, a shell-based model was determined to be the most suitable numerical analysis model for jointless bridges due to the similarity of the model's results compared with the obtained displacement shape, which was influenced by relative errors, precision, and practical aspects. Accordingly, the behavior of a jointless bridge was analyzed at various wall depths using shell element-based and solid element models. In addition, the results of MIDAS Civil and ABAQUS analysis programs were compared. In the case of semi-integrated bridges (A and B), the displacement decreased as the wall depth increased due to the ground reaction force in Case 1 under a linear spring condition and +30℃. In the case where temperature was -30℃, the change in displacement was small because the ground reaction did not occur. As for bridge C (a fully integrated alternating bridge) and bridge D (an integrated chest wall alternating bridge), the displacement decreased as the wall depth increased at both +30 and -30℃ due to pile resistance. As for the comparison between the analysis programs used, the relative error in Case 1 was small, whereas a significant difference in Case 2 was observed. The foregoing variation is possibly due to the difference in the application of the nonlinear spring in the programs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.285-293
• /
• 2010

Soil moisture is a key factor to control the exchange of water and energy between the surface and the atmosphere. In recent, many researches for spatial and temporal variability analyses of soil moisture have been conducted. In this study, we analyzed the spatio-temporal variability of soil moisture in Walnut Gulch Experimental Watershed, Arizona, U.S. during the Soil Moisture Experiment 2004 (SMEX04). The spatio-temporal variability analyses were performed to understand sensitivity of five observation sites with precipitation and relationship between mean soil moisture, and its standard deviation and coefficient of variation at the sites, respectively. It was identified that log-normal distribution was superior to replicate soil moisture spatial patterns. In addition, precipitation was identified as a key physical factor to understand spatio-temporal variability of soil moisure based on the temporal stability analysis. Based on current results, higher spatial variability was also observed which was agreed with the results of previous studies. The results from this study should be essential for improvement of the remotely sensed soil moisture retrieval algorithm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.303-313
• /
• 2020

Rice grain shape is one of the key components of grain yield and market value. An understanding of the genetic basis of the variation in grain shape could be used to improve grain shape. In this study, we developed a total of 265 F₂ individuals derived from a cross between japonica cultivars (Josaeng-jado and Langi) and used this population for quantitative trait locus (QLT) analysis. Correlation analysis was performed to identify relationships between grain traits (GL: grain length, GW: grain width, L/W: ratio of length to width, TGW: 1,000 grain weight). The grain shape was positively correlated with GL and TGW, and negatively correlated with GW. In QTL analysis associated with grain shape, one QTL for GL, qGL5, detected on chromosome 5, explained 20.3% of the phenotypic variation (PV), while two QTLs, qGW5 (PV=36.1) and qGW7 (PV=26.1), for GW were identified on chromosomes 5 and 7, respectively. Evaluation of the effects of each of the QTLs on the grain shape in the population showed a significant difference in the grain size in positive lines compared with the lines without the QTLs. According to the QTL combination of the allelic-types, the grain shape of the tested lines varied from semi-round type to long spindle-shaped type. The results of this study extend our knowledge about the genetic pool governing the diversity of grain shape in japonica cultivars and could be used to improve the grain shape of this species through marker-assisted selective breeding in Korea.

• The Korean Journal of Nuclear Medicine
• /
• v.37 no.2
• /
• pp.73-82
• /
• 2003

Objectives: A new software (Cardiac SPECT Analyzer: CSA) was developed for quantification of volumes and election fraction on gated myocardial SPECT. Volumes and ejection fraction by CSA were validated by comparing with those quantified by Quantitative Gated SPECT (QGS) software. Materials and Methods: Gated myocardial SPECT was peformed in 40 patients with ejection fraction from 15% to 85%. In 26 patients, gated myocardial SPECT was acquired again with the patients in situ. A cylinder model was used to eliminate noise semi-automatically and profile data was extracted using Gaussian fitting after smoothing. The boundary points of endo- and epicardium were found using an iterative learning algorithm. Enddiastolic (EDV) and endsystolic volumes (ESV) and election fraction (EF) were calculated. These values were compared with those calculated by QGS and the same gated SPECT data was repeatedly quantified by CSA and variation of the values on sequential measurements of the same patients on the repeated acquisition. Results: From the 40 patient data, EF, EDV and ESV by CSA were correlated with those by QGS with the correlation coefficients of 0.97, 0.92, 0.96. Two standard deviation (SD) of EF on Bland Altman plot was 10.1%. Repeated measurements of EF, EDV, and ESV by CSA were correlated with each other with the coefficients of 0.96, 0.99, and 0.99 for EF, EDV and ESV respectively. On repeated acquisition, reproducibility was also excellent with correlation coefficients of 0.89, 0.97, 0.98, and coefficient of variation of 8.2%, 5.4mL, 8.5mL and 2SD of 10.6%, 21.2mL, and 16.4mL on Bland Altman plot for EF, EDV and ESV. Conclusion: We developed the software of CSA for quantification of volumes and ejection fraction on gated myocardial SPECT. Volumes and ejection fraction quantified using this software was found valid for its correctness and precision.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.312-318
• /
• 2014

We evaluated the morphological characteristics of 156 maize inbred lines, which were developed to breeding normal maize variety at Maize Experiment Station, Gangwon Agricultural Research and Extension Services, by examining 11 quantitative and three qualitative characteristics. On the evaluation of three qualitative traits for 156 maize inbred lines, most inbred lines showed yellow (85 and 84 inbred lines) at tassel color (QL1) and silk color (QL2), and showed semi erect (105 inbred lines) at plant type (QL3). While, the evaluation of 11 quantitative traits for 156 maize inbred lines, they showed the morphological variation in days of tasseling (QN1, 56.5 to 76.0 days), days of silking (QN2, 59.0 to 85.5 days), stem thickness (QN3, 12.7 to 42.9 mm), plant height (QN4, 111.8 to 239.8 cm), ear height (QN5, 48.2 to 126.5 cm), 100 kernel weight (QN6, 14.9 to 36.4 g), ear length (QN7, 10.0 to 79.0 cm), setted kernel length (QN8, 8.0 to 70.5 cm), ear thickness (QN9, 4.0 to 22.0 cm), total kernel weight (QN10, 22.0 to 490.0 kg) and water content (QN11, 9.3 to 11.9%), respectively. As a result, 11 inbred lines (00hf3, 00hf19, 00hf30, 00hf36, 02S8069, 02S8072, 02S8090, 02S8099, 05S10011, 06S8085-6, 07S8011) in the 156 normal maize inbred lines have showed comparatively high values. While, the results of PCA (principal component analysis) indicated that the ear length (QN7), setted kernel length (QN8), ear thickness (QN9) and total kernel weight (QN10) greatly contributed in positive direction on the first principal components. And also, days of tasseling (QN1), days of silking (QN2), plant height (QN4) and ear height (QN5) contributed in negative direction on the second principal component. Thus these morphological characters, which were greatly contributed in the first and second principal components, might be considered to be useful for discrimination among 156 normal inbred lines. Specifically, this study's assessment of morphological characteristics of 156 normal inbred lines will be helpful useful for normal maize breeding programs such activities as planning crosses for hybrid and line development at Maize Experiment Station, Gangwon Agricultural Research and Extension Services.