References
- Luigi, S., Davi, S.V., Marco, D., Fabrizio, S., and Jacopo, T., "Effect of Temperature on Static and Low Velocity Impact Properties of Thermoplastic Composites," Composites Part B, Vol. 113, 2017, pp. 100-110. https://doi.org/10.1016/j.compositesb.2017.01.010
- Bo, X., Sha, Y., Yang, W., Hongfu, L., Boming, Z., and Robert, O.R., "Long-fiber Reinforced Thermoplastic Composite Lattice Structures: Fabrication and Compressive Properties," Composites Part A, Vol. 97, 2017, pp. 41-50. https://doi.org/10.1016/j.compositesa.2017.03.002
- Kuklinski, M., "Influence of Voids and Layers Number on Mechanical Properties of Hand Lay-up Bended Laminates," Journal of Polish CIMAC, 2011.
- Grouve, W.J.B., Warnet, L.L., Rietman, B., Visser, H.A., and Akkerman, R., "Optimization of the Tape Placement Process Parameters for Carbon-PPS Composites," Composites Part A, Vol. 50, 2013, pp. 44-53. https://doi.org/10.1016/j.compositesa.2013.03.003
- Centea, T., Grunenfelder, L. K., and Nutt, S. R., "A Review of Out-of-autoclave Prepregs-Material Properties, Process Phenomena, and Manufacturing Considerations," Composites Part A, Vol. 70, 2015, pp. 132-154. https://doi.org/10.1016/j.compositesa.2014.09.029
- Kim, Y.I., and Choi, S.M., "Application of Composites on Korean Aircraft Program," Composite Research, Vol. 16, No. 1, 2003, pp. 68-74.
- Shim, J.Y., Jung, K.W., Lee, H.Y., Lee, S.K., Hwang, G.C., and Ahn, S.M., "KC-100 Full-scale Airframe Static Test," International Journal of Aeronautical and Space Sciences, Vol. 42, No. 1, 2014, pp. 67-75.
- Saenz-Castillo, D., Martin, M.I., Calvo, S., Rodriguez-Lence, F., and A. Guemes, "Effect of Processing Parameters and Void Content on Mechanical Properties and NDI of Thermoplastic Composites," Composites Part A, Vol. 121, 2019, pp. 308-320. https://doi.org/10.1016/j.compositesa.2019.03.035
- Qureshi, Z., Swait, T., Scaife, R., and El-Dessouky, H.M., "In Situ Consolidation of Thermoplastic Prepreg Tape Using Automated Tape Placement Technology: Potential and Possibilites," Composites Part B, Vol. 66, 2014, pp. 255-267. https://doi.org/10.1016/j.compositesb.2014.05.025
- Comer, A.J., Ray, D., Obande, W.O., Jones, D., Lyons, J., Rosca, I., O' Higgins, R.M., and McCarthy, M.A., "Mechanical Characterisation of Carbon Fibre-PEEK Manufactured by Laser-Assisted Automated-Tape-Placement and Autoclave," Composite Part A, Vol. 69, 2015, pp. 10-20. https://doi.org/10.1016/j.compositesa.2014.10.003
- Bandaru, A.K., Clancy, G., Peeters, D., O'Higgins, R.M., and Weaver, P.M., "Properties of a Thermoplastic Composite Skin-Stiffener Interface in a Stiffened Structure Manufactured by Laser-Assisted Tape Placement with in Situ Consolidation," Composite Structures, Vol. 214, 2019, pp. 123-131. https://doi.org/10.1016/j.compstruct.2019.02.011
- Kim, J.H., Han, J.S., Bae B.H., Choi, J.H., Kweon, J.H., "Manufacturing and Structural Analysis of Thick Composite Spar Using AFP Machine," Composite Research, Vol. 28, No. 4, 2015, pp. 212-218. https://doi.org/10.7234/composres.2015.28.4.212
- Park, D.C., Park, C.W., Shin, D.H., and Kim Y.H., "A Study on Crystallization of Thermoplastic Aromatic Polymer," Composite Research, Vol. 31, No. 2, 2018, pp. 63-68. https://doi.org/10.7234/COMPOSRES.2018.31.2.063
- Gao S.L., and Kim J.K., "Cooling Rate Influences in Carbon Fibre/PEEK Composites. Part 1. Crystallinity and Interface Adhesion," Compos Part A, Vol. 31, Iss. 6, 2000, pp. 517-530. https://doi.org/10.1016/S1359-835X(00)00009-9
- Ayman, A.A., "Heat Treatment of Polymers: A Review", International Journal of Materials Chemistry and Physics, Vol. 1, No. 2, 2015, pp. 132-140.
- ASTM D3171. Standard Test Methods for Constituent Content of Composite Materials.
- ASTM D792. Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement.
- Little, J.E., Yuan, X., and Jones, M.I., "Characterisation of Voids in Fibre Reinforced Composite Materials," NDT & E International, Vol. 46, 2012, pp. 122-127. https://doi.org/10.1016/j.ndteint.2011.11.011
- ASTM D3418. Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry.
- ASTM D2344. Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates.