• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.213-225
• /
• 2010

The objective of the current study was to determine factors influencing concentrations of protein-related blood metabolites in indigenous Nguni and crossbred cattle in the semi-arid communal rangelands in South Africa. The body condition scores (BCS), packed cell volume (PCV) and serum concentrations of protein-related metabolites were determined seasonally in 100 cattle raised on communal rangelands from August 2007 to May 2008. Nguni cattle had lower (p<0.05) albumin-globulin ratio, albumin, urea and creatinine, and higher (p<0.05) globulin concentrations than the local crossbreds. Local crossbreds had higher (p<0.05) alanine aminotransferase and alkaline phosphatase concentrations and lower (p<0.05) aspartate aminotransferase concentrations in the postrainy season than Nguni cattle. The creatinine concentrations of Nguni and crossbred cattle were lowest in the sour rangeland during the hot-wet season. The albumin concentrations of Nguni and crossbred cattle were higher (p<0.05) whilst PCV, albumin-globulin ratio and creatine kinase concentration were lower (p<0.05) in the sour rangeland than in the sweet rangeland. Total protein, albumin, globulin, aspartate aminotransferase and creatine kinase concentrations of Nguni and crossbred cattle were lower (p<0.05) in the hot-wet and late cool-dry seasons than in other seasons across rangeland types. Urea concentrations in both breeds were highest in the sweet rangeland in the hot-dry season compared to other seasons. It was concluded that Nguni cattle had lower concentrations of protein metabolites than local crossbreds and protein deficiencies were most prominent in the sweet rangeland during the cool-dry seasons.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.48-54
• /
• 1989

This study was conducted to select the best adapted alfalfa cultivars among 32 introduced alfalfa cultivars in the Korean environmental condition. Plant height and dry matter yield per cultivar were determined. On the point of plant height, seven high ranked cultivars among the 32 alfalfa cultivars in high order were Diamond> Milkmaker> Arrow>Chalienger>Sapphire > Dekalb brand 135> LS-1920. and seven low ranked cultivars in low order were Pioneer brand 5929> Maxidor> Dekalb brand 167> Pierce> Blazer> Raidor> Pioneer brand 532. Seven high ranked cultivars from 32 alfalfa cultivars on the dry matter yield in high order were Pike>LS-1920>Challenger>Salute>Diamond>Decathlon>Pioneer brand 581, and seven low ranked cultivars in low order were Maxidor>Pioneer brand 5929>Pioneer brand 532>Florida 77> Pierce> Magnum> Blazer. Dry matter yield per cultivar was also greater when alfalfa cultivar was appeared higher plant height compared with those which were lower plant height. Leading cultivars for plant growth and yield under the Korean environmental condition were Pike, LS-1920, Challenger, Salute, Diamond among the 32 alfalfa cultivars. All those cultivars except Challenger cultivar are Semi-dormant which can be well grown under moderate temperatures.

• KSBB Journal
• /
• v.18 no.6
• /
• pp.495-499
• /
• 2003

The effect of operating parameters (reaction temperature and time) and reaction modes (batch and semi-batch) on the behavior of amino acid production from hydrothermal decomposition of fish-derived wastes was investigated. The amino acids obtained in batch experiments at temperature of 250$^{\circ}C$ were mainly alanine (Ala) and glycine (Gly) at maximum yield of 65 and 28mg/g-dry fish, respectively. At relatively lower temperature of 200$^{\circ}C$, the yield of high-molecular-weight amino acids such as aspartic acid (Asp) and serine (Ser) is high, but decreases as temperature increases. It is likely that high-molecular-weight amino acids decompose faster than low-molecular ones. Semi-batch mode of reaction suppressed decomposition of amino acids into organic acids (or volatile materials) by continuously removing the products from the reaction zone as soon as they are formed. Thus, large amount of high-molecular-weight amino acids such as Asp and Ser at this reaction mode was observed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1630-1639
• /
• 2019

Objective: Sixty Pengbo semi-wool sheep ewes (approximately 1.5-years-old; $31.33{\pm}0.43kg$) were randomly assigned to two groups, either grazing (G) or dry lot feeding (D), to examine the effects of traditional daily grazing and dry lot feeding on performance and blood metabolites during the cold season in Tibetan Plateau. Methods: The ewes in the G group were grazed continuously each day and housed in one shed each evening, while the ewes in the D group were housed in another shed all day. All animals were fed 400 g/d of commercial concentrate, and grass hay was available freely throughout the experimental period. Results: Compared with the G group, the ewes in the D group had higher (p<0.05) live weight and weight gain. The D group ewes had greater (p<0.05) numbers of white blood cells and platelets, while they had lower (p<0.05) platelet-large cell ratios, cholesterol, high-density lipoprotein cholesterol and glutathione peroxidase, as compared with the G group ewes. Additionally, three serum metabolites, abscisic acid, xanthoxin and 3,4-dihydroxy-5-polypren, were upregulated (p<0.05) in the G group in comparison with the D group. Conclusion: In conclusion, a dry lot feeding regime during the winter and spring period will increase the productivity of sheep and improve blood physiological and biochemical profiles.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.265-271
• /
• 2010

One of the most important aspect of esthetic dentistry is shade selection. Alterations to perception of color can occur as a result of numerous factors, including light source, tooth surface texture, observer's ability, surrounding colors, the angle of observation, light and dark adaptation and others. During the clinical procedures, tooth might be in dry or semi-dry condition. The purpose of this study was to compare the shade changes in wet and dry conditions of natural tooth. Groups of measurement are an initial wet condition as control, dry in 10seconds, 1 minute, 5minutes and 30seconds air dry. Using Shadeeye, color difference(${\Delta}E$) between measurements were analyzed and there were significant differences between groups. But most of the differneces were <3.7 ${\Delta}E$ unit. Such differences are below the threshold for perceivable color mismathces in intraoral condition. Shade selection with an intraoral colorimeter could be changes in dry and wet condition but there might be no significant differences in visual color mathing.

• Journal of Sericultural and Entomological Science
• /
• v.53 no.1
• /
• pp.50-54
• /
• 2015

Mulberry fruit is common to keep a frozen storage because of the very high water content. Because freezing-storing cost is generated before the processing or sales, farmers of mulberry fruit production are weighted in financial burden. In addition, mulberry fruit has difficulty in expanding consumption by made in the simple processed products like the mulberry jam, mulberry juice, mulberry enzyme, alcohol, etc. Recent, frozen fruits including frozen blueberries, frozen strawberries, frozen mango, frozen rich, frozen mulberry fruit has been started to sell in the large discount stores and convenience stores. However, there is restricted sales in only special place that have the frozen distribution facilities. So, for the income improvement and consumption promotion of mulberry farmers facing these difficult situations, we developed the processing method of semi-dried mulberry fruit using the vacuum freezing dryer. The frozen mulberry fruit which was stored below $-40^{\circ}C$ is to dry in a vacuum freeze dryer, at $30{\sim}35^{\circ}C$, 23 ~ 24 hours. Semi-dried mulberry fruit seperated respectively. It had soft texture, and maintained shape, size and flavor. In particular, semi-dried mulberry fruit can be stored at room temperature.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.3
• /
• pp.129-137
• /
• 2013

Each owner or operator of offshore products uses a maintenance management system like CMMS(Computerized Maintenance Management System) in order to manage their assets effectively and efficiently for a long time. But most of maintenance management systems have been focused on machinery items, not on 'Hull' until now. On the other hand, classifications like ABS, DNV, GL are having a sale on hull inspection and maintenance system for ships and an interest in hull maintenance system is increasing because of the application of EDD(Extended Dry Docking). This paper discusses the concept, inspection process and the practical application of Hull maintenance for Semi-submersible drilling rig to extend the service life and run a stable operation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.313-319
• /
• 2015

This study relates to an investigation into semi-dry manufacturing process of BP sludge based on non-heating production method. In this study, we conducted a research into reduction of water content ratio which arose from mixture of BP by-products of high water content ratio(50% or higher) with industrial by-products to use such BP by-products as construction materials in large quantity. We measured the reduction rate of water content ratio at the feeding ratio of water content reduction agent(1:0.5) in BP by-products. The results showed that water content ratio was the lowest with 18.5% in the mixture of PA+CFA(1:0.5). Moreover, water content ratio ranged between approximately 9.2% and 11.4% at the age of 1 day to 2 days at the aging temperature of $20-30^{\circ}C$, suggesting that the water content ratio was in the range within 10% which was a level suitable for use as construction material in this study. Meanwhile, we compared and evaluated the physical properties of non-heated BP by-products based on post-aging pulverization method. The results showed that there was no significant difference, depending on pulverization method. When production efficiency and economic feasibility were taken into consideration, it was found desirable to use fine particle pulverizer or pin mill enabling continuous production.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.139-148
• /
• 1995

In this paper we report the device of a multi-channel clinical instrument developed for determi¬nation of the levels of the urinary urobilinogen, glucose, ketone, bilirubin, protein, ascorbic acid, nitrite, pH, occult-blood, specific gravity, and leukocytes semiquantitatively. The test parameters are expressed on the dry test strips as a range of color intensities by chemical reactions. The instrument measures the value of each substance by reading the reflectance light emanated from the test strips. We also designed the reagent strip cassette and loader in order to intercept the outside interference. The loader can be operated semi-automatically. The light source is consisted on light emitting diodes at three specific wavelengths (560 nm, 610 nm, 650 nm). Precision of the system was evaluated by testing a series of commercial control urine samples. Furthermore, the performance of the instrument was compared with two other test methods on the urine samples from 100 persons. Our results showed a good repeatability between tests and a satisfactory agreement between the readings by our instrument and visual evaluation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.28-33
• /
• 2004

At present, industry and researchers are looking for ways to reduce the use of lubricants because of ecological and economical reasons. Therefore, metal cutting is to move toward dry cutting or semi-dry cutting. This paper presents an investigation into MQL(Minimum Quantity Lubrication) machining with the objective of deriving the optimum cutting conditions for the turning process of SM45C. To reach these goals several finish turning experiments were carried out, varying cutting speed, feed rate and oil quantity, with MQL. The surface roughness results of tests were measured and the effects of cutting conditions were analyzed by the method of Analysis of Variance(ANOVA). From the experimental results and ANOVA, it is found that a better surface roughness can be obtained by decreasing oil quantity and feed rate.