• 한국멀티미디어학회논문지
• /
• 제6권6호
• /
• pp.1015-1024
• /
• 2003

컴퓨터의 성능 향상으로 인해서, 멀티미디어 플레이어에 대한 사용자의 요구는 하나의 동영상 재생기(Media Player)에서 여러 개의 동영상을 동시에 실행시킬 수 있는 복수 동영상 재생기가 일반화 될 것으로 본다. 현재로는 단일 동영상 재생에서 사용한 방법을 그대로 사용한 복수 동영상 재생을 지원하는 제품이 나왔으나, 그로 인한 문제점은 해결하지 못하고 있다. 본 논문에서는 단일 동영상 재생에서 사용되어지는 방법들을 복수 동영상의 재생 시에 적용할 경우에 생기는 문제점들 즉, 복수 동영상 재생시의 깜빡임 현상, 재생 우선 순위 처리 그리고 반투명 처리 문제와 여러 개의 동영상을 재생할 경우에 가장 큰 문제점으로 공간 연출 지원이 이루어지지 않는다는 점을 인식하고, 오버랩핑(overlapping)과 오버레이(overlay)기법을 사용하는 복수 동영상의 공간 재생기를 설계 및 구현하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.341-341
• /
• 2012

Recently, oxide semi-conductor materials have been investigated as promising candidates replacing a-Si:H and poly-Si semiconductor because they have some advantages of a room-temperature process, low-cost, high performance and various applications in flexible and transparent electronics. Particularly, amorphous indium-gallium-zinc-oxide (a-IGZO) is an interesting semiconductor material for use in flexible thin film transistor (TFT) fabrication due to the high carrier mobility and low deposition temperatures. In this work, we demonstrated improvement of flexibility in IGZO TFTs, which were fabricated on polyimide (PI) substrate. At first, a thin poly-4vinyl phenol (PVP) layer was spin coated on PI substrate for making a smooth surface up to 0.3 nm, which was required to form high quality active layer. Then, Ni gate electrode of 100 nm was deposited on the bare PVP layer by e-beam evaporator using a shadow mask. The PVP and $Al_2O_3$ layers with different thicknesses were used for organic/inorganic multi gate dielectric, which were formed by spin coater and atomic layer deposition (ALD), respectively, at $200^{\circ}C$. 70 nm IGZO semiconductor layer and 70 nm Al source/drain electrodes were respectively deposited by RF magnetron sputter and thermal evaporator using shadow masks. Then, IGZO layer was annealed on a hotplate at $200^{\circ}C$ for 1 hour. Standard electrical characteristics of transistors were measured by a semiconductor parameter analyzer at room temperature in the dark and performance of devices then was also evaluated under static and dynamic mechanical deformation. The IGZO TFTs incorporating hybrid gate dielectrics showed a high flexibility compared to the device with single structural gate dielectrics. The effects of mechanical deformation on the TFT characteristics will be discussed in detail.

• 한국광물학회지
• /
• 제9권2호
• /
• pp.102-112
• /
• 1996

The precious serpentine, referring to a rare and highly valuable gem variety of serpentine group minerals, is found to occur in serpentinite from Booyo Gren Jade Mine which is located in Oesan-myun, Booyo-gun of Chungchungnam-do. Geommological properties of the precious serpentine have been investigated by use of polarizing microscope, specific gravity balance, refractometer, hardness pencils, X-ray diffractometer, XRF, ICP-MS analyser, and infrared absorption spectroscope.The precious serpentine from Booyo is colored deep green with oily luster and semi-transparent. It is highly tough and Mohs's scale of hardness is measured to be 5-6. Specific gravity is determined to be 2.67, and a single refractive index ND=1.56 is observed by a spot method, using sodium light source. X-ray powder diffraction data is represented by the reflection lines at 7.40(100), 4.64(25), 3.68(68), 2.757(69), 2.530(49), 2.549(32), and 1.710(21${\AA}$), which compares very well with that of antigorite of serpentine group minerals. The major chemical compositions of the precious serpentine group minerals. The major chemical compositions of the precious serpentine are SiO2 42.49%, MgO 39.08%, Fe2O3 3.85%, and H2O 11.87%. Besides, trace elements such as Cr(2188), Ni(1110ppm), Co(58ppm), and Ta (108ppm) are relatively spectrum shows peaks at 3670, 1190, 1070, 980 and 610cm-1. Strong absorption at 3670cm-1 is due to OH stretching, and 1190, 1070 and 980cm-1 due to SiO stretching. The absorption 610cm-1 is formed by alteration of pre-existing ultramafic rock, namely peridotite, with an introduction of fluid with very little content of CO2, under 400$^{\circ}C$ environment. Magnetite inclusions, finely disseminated in the precious serpentine, may be a result of Fe precipitation, during serpentinization of olivine-bearing country rock.

• 융합정보논문지
• /
• 제7권5호
• /
• pp.53-58
• /
• 2017

석유 고갈의 시대에 저가이면서 반투명한 특징을 갖고 있는 염료감응형 태양전지(DSC)는 1991년 $Gr{\ddot{a}}tzel$의 연구결과 보고 이후 많은 주목을 받아왔다. 염료감응형 태양전지의 광전극의 빛 수확 성능을 증진시키고, 궁극적으로 광전변환효율을 향상시키기 위하여 다양한 구조를 갖는 산란층이 광전극 소재로 제안되었다. DSC 광전극의 산란층에서 산란의 중심으로는 지름이 250 - 300 nm 정도의 크기를 갖는 비교적 큰 이산화티탄 나노입자가 필요하다. 본 연구에서는 변형된 졸겔 공정을 이용하여 약 300 nm 크기의 이산화티탄 나노결정을 합성하였다. XRD와 TEM 분석결과에 의하면, 합성된 이산화티탄 나노입자는 아나타제 상의 단결정 특성을 나타내었다. 합성된 이산화티탄 나노입자를 이용하여 스핀 코팅 공정으로 제조된 이산화티탄 박막의 광학적 투과율은 550 nm 파장에서 약 50%로 측정되었다. 이처럼 적당한 투과율은 DSC 산란층의 산란 중심으로 사용하기에 적합하며, DSC의 광전변환효율 향상에 적절하게 기여할 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.285-285
• /
• 2013

Recently, hexagonal boron nitride (h-BN), which is III-V compound of boron and nitride by strong covalent sp2 bonds has gained great interests as a 2 dimensional insulating material since it has honeycomb structure with like graphene with very small lattice mismatch (1.7%). Unlike graphene that is semi-metallic, h-BN has large band gap up to 6 eV while providing outstanding properties such as high thermal conductivity, mechanical strength, and good chemical stability. Because of these excellent properties, hBN can potentially be used for variety of applications such as dielectric layer, deep UV optoelectronic device, and protective transparent substrate. Low pressure and atmospheric pressure chemical vapor deposition (LPCVD and APCVD) methods have been investigated to synthesize h-BN by using ammonia borane as a precursor. Ammonia borane decomposes to polyiminoborane (BHNH), hydrogen, and borazine. The produced borazine gas is a key material that is a used for the synthesis of h-BN, therefore controlling the condition of decomposed products from ammonia borane is very important. In this paper, we optimize the decomposition of ammonia borane by investigating temperature, amount of precursor, and other parameters to fabricate high quality monolayer h-BN. Synthesized h-BN is characterized by Raman spectroscopy and its absorbance is measured with UV spectrophotometer. Topological variations of the samples are analyzed by atomic force microscopy. Scanning electron microscopy and Scanning transmission Electron microscopy are used for imaging and analysis of structures and surface morphologies.

• Geomechanics and Engineering
• /
• 제14권2호
• /
• pp.195-202
• /
• 2018

Many laboratory experiments on crack propagation under uniaxial loading and biaxial loading have been conducted in the past using transparent materials such as resin, polymethyl methacrylate (PMMA), etc. However, propagation behaviors of three-dimensional (3D) cracks in rock or rock-like materials under tri-axial loading are often considerably different. In this study, a series of true tri-axial loading tests on the rock-like material with two semi-ellipse pre-existing cracks were performed in laboratory to investigate the acoustic emission (AE) characteristics and propagation characteristics of 3D crack groups influenced by intermediate principal stress. Compared with previous experiments under uniaxial loading and biaxial loading, the tests under true tri-axial loading showed that shear cracks, anti-wing cracks and secondary cracks were the main failure mechanisms, and the initiation and propagation of tensile cracks were limited. Shear cracks propagated in the direction parallel to pre-existing crack plane. With the increase of intermediate principal stress, the critical stress of crack initiation increased gradually, and secondary shear cracks may no longer coalesce in the rock bridge. Crack aperture decreased with the increase of intermediate principal stress, and the failure is dominated by shear fracturing. There are two stages of fracture development: stable propagation stage and unstable failure stage. The AE events occurred in a zone parallel to pre-existing crack plane, and the AE zone increased gradually with the increase of intermediate principal stress, eventually forming obvious shear rupture planes. This shows that shear cracks initiated and propagated in the pre-existing crack direction, forming a shear rupture plane inside the specimens. The paths of fracturing inside the specimens were observed using the Computerized Tomography (CT) scanning and reconstruction.

• 헤리티지:역사와 과학
• /
• 제35권
• /
• pp.236-282
• /
• 2002

Among elements of play, there are puppets performances and shadows performance which are replacing actors by puppets and shadows. Puppet performance is characteristic of expressing various movements and symbols at its conveniences by the reduced models of human form with various materials. Shadow performance is realized in various colors that cannot be discovered in other countries by expressing mysterious cubic effect in reflecting the light against various forms. Mansukjung Nolum is a unique shadow performance that has been inherited in Korea. There are found many shadow performances inherited in the northern Europe and South-eastern Asia. Recently the silhouette animation in application of shadow performance is made. In the northern Europe and South-eastern Asia, they performed in white and black color while Mansukjung Nolum is performed in natural colors. Since they adopted the leather materials for making puppets, their opaque feature cannot reflect the colored light. But in Korea we adopted the specially colored semi-transparent Korean paper, which gives the colored shadows to spectators. Mansukjung Nolum consists of three acts for arousing attention of fallen monks destroying the teaching of Buddha. Seosanbakchumji Nolum is a puppet performance inherited in a village in Seosan, Choongnam instead of wandering artists. The story and form of performance in Namsadangpae's puppet play is mostly similar to it, but it is woven by its villages natural environment and specific dialects, reflecting their consciousness in mind. The villagers made the puppets and manipulate them in communicating their wisdom of life between them. Parkchumji Nolum is a kind of integral art combining puppet manipulation, witticism, songs and dances. The hero of Parkchumji discloses the social and structural conflicts of feudalism, in arousing the spectators' rich attention of self-awareness and lessons.

• 패션비즈니스
• /
• 제23권2호
• /
• pp.124-139
• /
• 2019

The purpose of this study was to examine the characteristic expression of Korean traditional costumes shown in the Korean paintings by Kim Hyun-Jung. The study analyzed the paintings by Kim Hyun-Jung to find out the characteristics of the contemporary Korean paintings and the expression of Korean traditional costumes. The characteristics of Kim Hyun-Jung's works are as follows: 1) The paintings are drawn by using Korean traditional painting methods and finished with Korean traditional paper, hanji. Moreover, they show the Korean traditional costume as main subject material. 2) They use modern painting methods, such as collage, and show pop art characters by use of contemporary popular products. 3) The artist communicates with the public through SNS and YouTube, and shows characteristics of popular art through commercial art products and advertisements. The characteristics of the Korean traditional costume in Kim Hyun-Jung's works are as follows. 1) The hanbok shown in the paintings is a traditional style with tight jeogori and wide chima. Chima is drawn in thin coloring with Korean ink and jeogori is expressed with semi-transparent hanji in various patterns and colors, which shows the subject 'coy'. 2) Various kinds of Korean traditional accessories and modernized flower shoes with high heels are shown as subject materials. The art works by contemporary Korean artists are expected to be the route to give valuable information to the public about Korean traditional costumes as well as the trendy Korean culture.

• 한국정보통신학회논문지
• /
• 제24권11호
• /
• pp.1445-1450
• /
• 2020

최근 실감 콘텐츠 체험 기회를 제공하기 위한 유사홀로그램(hologram-like)시스템은 공연, 전시, 교육 등에 활발히 적용 및 서비스되고 있다. 이러한 유사홀로그램 시스템을 구성하는 방법은 피라미드형, 반투명 대형 단일 스크린 형태 등 설치될 장소, 사용 목적, 체험자 인원, 콘텐츠의 형태 등에 따라 다양한 크기, 투영 면수 등으로 구성할 수 있다. 본 논문에서는 형태가 서로 다른 이기종의 유사홀로그램 시스템에서 구동되는 실감 콘텐츠 제작을 용이하게 하기 위해 하드웨어 구성에 맞추어 즉석에서 자동적으로 가시화할 수 있는 기법을 제시한다. 본 논문의 결과에 따르면 유사홀로그램 시스템의 구성에 따라 콘텐츠를 매뉴얼하게 재가공하는 노력이 필요 없이 콘텐츠 개발자는 유사홀로그램 시스템에 투영되는 콘텐츠만을 개발하면 즉석에서 자동으로 보정된 가시화가 진행됨을 알 수가 있었다.

• 항공우주시스템공학회지
• /
• 제17권4호
• /
• pp.18-27
• /
• 2023

본 논문에서는 열해석의 하중조건으로 레이저 열원을 설정하여 반사경의 구조-열-광학 성능 분석을 수행하였다. 레이저 열원 모델은 가우시안 빔을 바탕으로 반투명한 소재를 고려한 Beer-Lambert 법칙을 적용하여 하중조건으로 선정하였으며, 반사경만의 성능 분석을 위하여 기구부는 고려하지 않았다. 열변형해석을 수행하여 반사경 표면의 온도 변화로 인한 열응력과 열변형 데이터를 얻었다. 열변형에 의한 반사경 표면의 변위 데이터를 Zernike 다항식에 피팅하여 파면오차를 계산하였으며, 이를 통해 고에너지 레이저가 반사경으로 입사될 때 반사경의 광학 성능을 예측할 수 있었다.