• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2240-2242
• /
• 2002

This paper show serial communication method in order to design how to interface between fault tolerant systems with redundancy. Problem has been in the method that fault tolerant system had switched of serial data with common switching device. This problem degrade reliability in itself and total system which is interfaced with that serial communication system. So Arbitration module of serial communication which is suggested in this paper can improve the reliability using voter algorithm which fault is detected passively.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2239-2241
• /
• 1999

The most important question is how to use which kind of switch in pulsed power generation. There are many kinds of commercial closing switches, which have advantages and disadvantages. The most popular closing switch is the spark gap, but it has a disadvantage in life time, because of erosion of electrodes by arc heating. The Rotary Arc Gap (RAG) switch, especially Walkie-Edgar type RAG switch, was proposed to solve such problems in spark gap. It has a simple and special structure for arc moving caused from self-induced electromagnetic force, because moving arc makes less erosion on the electrodes. In this study we have made an Walkie-Edgar type RAG switch, tested the switching with capacitive energy storage system, and measured rotating arc speed in different peak current.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.1
• /
• pp.10-19
• /
• 1990

A fault tolerant control system, in which a digital back-up controller system is added on the existing analog control system, is developed for enhancing reliability of boiler control system in power plant. The digital back-up controller system(DBCS) has a multi-processor structure with capabilities of fault diagnosis, back-up control, self test, and graphic monitoring. Specifically, switching mechanism composed of expandable modules is designed so that back-up controller takes over any faulty control loops and the number of back-up control loops is determined as that of simultaneous faults. A process simulator that simulates the boiler analog control system is developed for safety test and performance evaluation prior to real plant application. DBCS is installed at the Ulsan thermal power plant, and fault tolerant control performance is assured under the faults that some controller modules are pulled out.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1814-1819
• /
• 1996

This paper describes a dnw serial interface system which uses comma free code. Typically parallel 25 pin cable and connectors are used to transfer and receive the data between digital systems such as HDVCR, D3VTR and HDTV Receiver.The coaxial cable is more desirable for consumer product applications and also for studio applications where long signal paths and switching are requeired. This serial data trasfer technique is possible the error detection and the self synchronization, also easy edge insertion for PLL control. It is also cost effective because is does not requeire RF PLL, scrambling, and NRZI hardware.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.704-706
• /
• 1993

This paper, introduces a Current-fed type High-Frequency Inverter with self turning devices. By replacing Thyrisors used for power source of heat treatment with high speed switching element, MOSFET in current type Inverter, the proposed Inverter makes high speed performance with several 100kHz. This paper also depicts some operating principles of the proposed circuits and general operating characteristics. Steady state solution on state variables in analysis of the proposed circuit is described generally by using normalized parameter and its characteristics depending on separate ratio(n) is also shown.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.501-517
• /
• 2016

Synchronized switch damping (SSD) is a structural vibration control technique in which a piezoelectric patch attached to or embedded into the structure is connected to or disconnected from the shunt circuit in order to dissipate the vibration energy of the host structure. The switching process is performed by a digital signal processor (DSP) which detects the displacement extrema and generates a command to operate the switch in synchronous with the structure motion. Recently, autonomous SSD techniques have emerged in which the work of DSP is taken up by a low pass filter, thus making the whole system autonomous or self-powered. The control performance of the previous autonomous SSD techniques heavily relied on the electrical quality factor of the shunt circuit which limited their damping performance. Thus in order to reduce the influence of the electrical quality factor on the damping performance, a new autonomous SSD technique is proposed in this paper in which a negative capacitor is used along with the inductor in the shunt circuit. Only a negative capacitor could also be used instead of inductor but it caused saturation of negative capacitor in the absence of an inductor due to high current generated during the switching process. The presence of inductor in the shunt circuit of negative capacitor limits the amount of current supplied by the negative capacitance, thus improving the damping performance. In order to judge the control performance of proposed autonomous SSDNCI, a comparison is made between the autonomous SSDI, autonomous SSDNC and autonomous SSDNCI techniques for the control of an aluminum cantilever beam subjected to both single mode and multimode excitation. A value of negative capacitance slightly greater than the piezoelectric patch capacitance gave the optimum damping results. Experiment results confirmed the effectiveness of the proposed autonomous SSDNCI technique as compared to the previous techniques. Some limitations and drawbacks of the proposed technique are also discussed.

• Korean Journal of Clinical Pharmacy
• /
• v.15 no.2
• /
• pp.139-148
• /
• 2005

Appropriate drug classification is important fur rational drug consumption. This study was conducted to evaluate the appropriateness of current drug classification system and suggest possible ways for improving the system. Nonprescription drug market has been decreased. Since total 27,962 products had been classified (prescription 17,187 vs. nonprescription 10,775 products, 61.5% vs. 38.5%) in July 2000 for implementing separation of drug prescribing and dispensing system, there are no classification changes. Reclassification is not motivated by product holder and regulatory system did not lead classification change either. Consumers' ease access to some nonprescription drugs is demanded. But point of public awareness and cultural and health environmental views, saff drug use rather than advantages from broad supply of nonprescription drugs is more critical. We concluded that current 2-categorized (prescription and nonprescription) drug classification system is appropriate, and addition of general sale category should be approached carefully with long term Preparations such as establishment of better nonprescription drug consuming infrastructure by public information provision and education for improving public medicinal knowledge and strengthening self medication guidance, and review of current classification status of marketed drugs and switching possibilities. For systemizing and encouraging reclassification, introduction of regulatory renewal system as a continuous reevaluation program which is the best way to review appropriateness of drug classification as well as provision of detailed guidance for industry including policy, requirement and process fer reclassification application, are necessary.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.307-307
• /
• 2014

정보화 시대로 접어들면서 동일한 공간에 더 많은 정보를 저장할 수 있고, 보다 빠른 동작이 가능한 비휘발성 메모리 소자에 대한 요구가 증가하고 있다. 하지만, 최근 비휘발성 메모리 소자 관련 연구보고에 따르면, 메모리 소자의 소형화 및 직접화 측면에서, 전하 저장을 기반으로 하는 기존의 Floating-Gate(FG) Flash 메모리는 20 nm 이하 공정에서 한계가 예측 되고 있다. 따라서, 이러한 FG Flash 메모리의 한계를 해결하기 위해, 기존에 FET 기반의 FG Flash 구조와 같은 3 terminal이 아닌, Diode와 같은 2 terminal로 동작이 가능한 ReRAM, PRAM, STT-MRAM, PoRAM 등 저항변화를 기반으로 하는 다양한 종류의 차세대 메모리 소자가 연구되고 있다. 그 중, 저항 변화 메모리(ReRAM)는 CMOS 공정 호환성, 3D 직접도, 낮은 소비전력과 빠른 동작 속도 등의 우수한 동작 특성을 가져 차세대 비휘발성 메모리로 주목을 받고 있다. 또한, 상하부 전극의 2 terminal 만으로 소자 구동이 가능하기 때문에 Passive Crossbar-Array(CBA)로 적용하여 플래시 메모리를 대체할 수 있는 유력한 차세대 메모리 소자이다. 하지만, 이를 현실화하기 위해서는 Passive CBA 구조에서 발생할 수 있는 Read Disturb 현상, 즉 Word-Line과 Bit-Line을 통해 선택된 소자를 제외하고 주변의 다른 소자를 통해 흐르는 Sneak Leakage Current(SLC)를 차단하여 소자의 메모리 State를 정확히 sensing하기 위한 연구가 선행 되어야 한다. 따라서, 현재 이러한 이슈를 해결하기 위해서, 많은 연구 그룹에서 Diodes, Threshold Switches와 같은 ReRAM에 Selector 소자를 추가하는 방법, 또는 Self-Rectifying 특성 및 CRS 특성을 보이는 ReRAM 구조를 제안 하여 SLC를 차단하고자 하는 연구가 시도 되고 있지만, 아직까지 기초연구 단계로서 아이디어에 대한 가능성 정도만 보고되고 있는 현실 이다. 이에 본 논문은 Passive CBA구조에서 발생하는 SLC를 해결하기 위한 새로운 아이디어로써, 본 연구 그룹에서 선행 연구로 확보된 안정적인 저항변화 물질인 SiN를 정류 특성을 가지는 n-Si/Ti 기반의 Schottky Diode와 결합함으로써 기존의 CBA 메모리의 Read 동작에서 발생하는 SLC를 차단 할 수 있는 1SD-1R 구조의 메모리 구조를 제작 하였으며, 본 연구 결과 기존에 문제가 되었던 SLC를 차단 할 수 있었다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.157-165
• /
• 2006

This paper proposes a new output-buffered multicast ATM switch with tandem crosspoints switching fabric, named the MTCOS(Multicast Tandem Crosspoint Output-buffered Switch). The MTCOS consists of multiple simple crosspoint switch fabrics, named TCSF(Tandem Crosspoint Switch Fabric) , and concentrated output buffers for efficient multicasting. The TCSF resolves the cell delay deviation problem which the self-routing crossbar switches inherently have. Further, it offers multiple concurrent pathes from one input to multiple output ports. It also provides multi-channel switching by easy software configuration and has several desirable characteristics such as scalability, high Performance, and modularity. A shared traffic concentration and output queuing strategies of the MTCOS results in lower cell loss as well as lower cell delay time over a wide range of multicast traffic. Furthermore, it has lower hardware complexity than that of the SCOQ and Knockout multicast switch to achieve the same Knockout concentration rate as the conventional switches. It is shown that the proposed switch can be easily applied to design high performance for any multicast traffic by analytic analysis and computer simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.423-430
• /
• 2009

Recently as the inactive response characteristics of the existing RCD used on low voltage power distribution system, so control of overload and electric short circuit faults, major causes of electrical fires, are not enough. Therefore, this paper confirms the unreliability of the existing RCD by electrical fault simulator and proposes a EFDPD by using semiconductor switching devices and a high precision current sensor (namely, reed switch) for the prevention of electrical disasters in low voltage power distribution system caused by overload or electric short circuit faults. The sensitive reed switch in the proposed EFDPD exactly detects the increased magnetic flux with the overload or the short current caused by a number of electrical faults, and the following, the self circuit breaker in EFDPD rapidly cuts off the system. The proposed EFDPD confirms the excellent characteristics in response velocity and accuracy in comparison with the conventional circuit breaker through various operation performance analysis. The proposed EFDPD can also prevent electrical disasters, like as electrical fires, which resulted from the malfunction and inactive response characteristics of the existing RCD.