Browse > Article
http://dx.doi.org/10.5139/IJASS.2016.17.4.501

An autonomous synchronized switch damping on inductance and negative capacitance for piezoelectric broadband vibration suppression  

Qureshi, Ehtesham Mustafa (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics)
Shen, Xing (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics)
Chang, Lulu (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics)
Publication Information
International Journal of Aeronautical and Space Sciences / v.17, no.4, 2016 , pp. 501-517 More about this Journal
Abstract
Synchronized switch damping (SSD) is a structural vibration control technique in which a piezoelectric patch attached to or embedded into the structure is connected to or disconnected from the shunt circuit in order to dissipate the vibration energy of the host structure. The switching process is performed by a digital signal processor (DSP) which detects the displacement extrema and generates a command to operate the switch in synchronous with the structure motion. Recently, autonomous SSD techniques have emerged in which the work of DSP is taken up by a low pass filter, thus making the whole system autonomous or self-powered. The control performance of the previous autonomous SSD techniques heavily relied on the electrical quality factor of the shunt circuit which limited their damping performance. Thus in order to reduce the influence of the electrical quality factor on the damping performance, a new autonomous SSD technique is proposed in this paper in which a negative capacitor is used along with the inductor in the shunt circuit. Only a negative capacitor could also be used instead of inductor but it caused saturation of negative capacitor in the absence of an inductor due to high current generated during the switching process. The presence of inductor in the shunt circuit of negative capacitor limits the amount of current supplied by the negative capacitance, thus improving the damping performance. In order to judge the control performance of proposed autonomous SSDNCI, a comparison is made between the autonomous SSDI, autonomous SSDNC and autonomous SSDNCI techniques for the control of an aluminum cantilever beam subjected to both single mode and multimode excitation. A value of negative capacitance slightly greater than the piezoelectric patch capacitance gave the optimum damping results. Experiment results confirmed the effectiveness of the proposed autonomous SSDNCI technique as compared to the previous techniques. Some limitations and drawbacks of the proposed technique are also discussed.
Keywords
Autonomous; Piezoelectric; Broadband; Synchronized;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Davis, C. L. and Lesieutre, G. A., "A Modal Strain Energy Approach to the Prediction of Resistivity Shunted Piezoceramic Damping", Journal of Sound and Vibration, Vol. 184, No. 1, 1995, pp. 129-139. DOI: 10.1006/jsvi.1995.0308   DOI
2 Forward, R. L., "Electronic Damping of Vibrations in Optical Structures", Applied Optics, Vol. 18, 1979, pp. 690-697. DOI: 10.1364/AO.18.000690   DOI
3 Shen, H., Qiu, J., Ji, H., Zhu, K., Balsi, M., Giorgio, I. and Dell'Isola, F., "A low-Power Circuit for Piezoelectric Vibration Control by Synchronized Switching on Voltage Sources", Sensors and Actuators A: Physical, Vol. 161, No. 1-2, 2010, pp. 245-255. DOI:10.1016/j.sna.2010.04.012   DOI
4 Delpero, T., Di Lillo, L., Bergamini, A. E. and Ermanni, P., "Energy Harvesting Module for the Improvement of the Damping Performance of Autonomous Synchronized Switching on Inductance", Journal of Intelligent Material Systems and Structures, Vol. 24, No. 7, 2012, pp. 837-845. DOI: 10.1177/1045389X12463463   DOI
5 Neubauer, M. and Wallaschek, J., "Analytical and Experimental Investigation of the Frequency Ratio and Switching Law for Piezoelectric Switching Techniques", Smart Materials and Structures, Vol. 17, 2008, 035003 (9pp). DOI:10.1088/0964-1726/17/3/035003   DOI
6 Badel, A., Sebald, G., Guyomar, D., Lallart, M., Lefeuvre, E., Richard, C. and Qiu, J., "Piezoelectric Vibration Control by Synchronized Switching on Adaptive Voltage Sources: Towards Wideband Semi-active Damping", Journal of the Acoustical Society of America, Vol. 119, No. 5, 2006, pp. 2815-2825. DOI: 10.1121/1.2184149   DOI
7 Hagood, N. W. and von Flotow, A., "Damping of Structural Vibrations with Piezoelectric Materials and Passive Electrical Networks", Journal of Sound and Vibration, Vol. 146, 1991, pp. 243-268. DOI: 10.1016/0022-460X(91)90762-9   DOI
8 Petit, L., Lefeuvre, E., Richard, C. and Guyomar, D., "A Broadband Semi Passive Piezoelectric Technique for Structural Damping", Proceedings of SPIE International Symposium on Smart Structure Materials: Damping and Isolation, Vol. 5386, 2004, pp. 414-425. DOI:10.1117/12.532716
9 Riodan, R. H. S., "Simulated Inductors Using Differential Amplifiers", Electronic Letter, Vol. 3, No. 2, 1967, pp. 50-51. DOI: 10.1049/el:19670039   DOI
10 Guyomar, D. and Badel, A., "Nonlinear Semi-Passive Multimodal Vibration Damping: An Efficient Probabilistic Approach", Journal of Sound and Vibration, Vol. 294, 2006, pp. 249-268. DOI: 10.1016/j.jsv.2005.11.010   DOI
11 Johnson, C. D., "Design of Passive Damping Systems", Journal of Mechanical Design, Transactions of the ASME, Vol. 117, Issue B, 1995, pp. 171-176. DOI:10.1115/1.2836451.   DOI
12 Hagood, N. W. and Crawley, E. F., "Experimental Investigations of Passive Enhancement of Damping for Space Structures. Journal of Guidance, Control and Dynamics, Vol. 14, No. 6, 1991, pp. 1100-1109. DOI: 10.2514/3.20763   DOI
13 Hollkamp, J. J., "Multimodal Passive Vibration Suppression with Piezoelectric Materials and Resonant Shunts", Journal of Intelligent Material Systems and Structures, Vol. 5, 1994, pp. 49-56. DOI: 10.1177/1045389X9400500106   DOI
14 Law, H. H., Rossiter, P. L., Simon, G. P. and Koss, L. L., "Characterization of Mechanical Vibration Damping by Piezoelectric Materials", Journal of Sound and Vibration, Vol. 197, 1996, pp. 489-513. DOI:10.1006/jsvi.1996.0544   DOI
15 Behrens, S., Moheimani, S. O. R. and Fleming, A. J., "Multiple Mode Current Flowing Passive Piezoelectric Shunt Controller", Journal of Sound and Vibration, Vol. 266, 2003, pp. 929-942. DOI: 10.1016/S0022-460X(02)01380-9   DOI
16 Clark, W. W., "Vibration Control with State-Switched Piezoelectric Materials", Journal of Intelligent Material Systems and Structures, Vol. 11, 2000, pp. 263-271. DOI: 10.1106/18CE-77K4-DYMG-RKBB   DOI
17 Richard, C., Guyomar, D., Audigier, D. and Ching, G., "Semi-Passive Damping Using Continuous Switching of a Piezoelectric Device", In Proceedings of SPIE Conference Passive Damping Isolation, Newport Beach, CA, Vol. 3672, 1999, pp. 104-111. DOI:10.1117/12.349773   DOI
18 Han, X., Neubauer, M. and Wallaschek, J., "Improved Piezoelectric Switch Shunt Damping Technique Using Negative Capacitance" Journal of Sound and Vibration, Vol. 332, 2013, pp. 7-16. DOI: 10.1016/j.jsv.2012.08.001   DOI
19 Lallart, M., Badel, A. and Guyomar, D., "Nonlinear Semi-Active Damping Using Constant or Adaptive Voltage Sources: A Stability Analysis", Journal of Intelligent Material Systems and Structures, Vol. 19, 2008, pp. 1131-1142. DOI: 10.1177/1045389X07083612   DOI
20 Shen, H., Qiu, J. and Balsi, M., "Vibration Damping as a Result of Piezoelectric Energy Harvesting", Sensors and Actuators A: Physical, Vol. 169, No. 1, 2011, pp. 178-186. DOI: 10.1016/j.sna.2011.04.043   DOI
21 Chen, Y. Y., Vasic, D., Costa, F. and Wu, W. J., "Self-Powered Semi-Passive Piezoelectric Structural Damping Based on Zero Velocity Crossing Detection", Smart Materials and Structures, Vol. 22, No. 2, 2013, pp. 025029. DOI: 10.1088/0964-1726/22/2/025029   DOI
22 Richard, C., Guyomar, D., Audigier, D. and Bassaler, H., "Enhanced Semi-Passive Damping Using Continuous Switching of a Piezoelectric Device on an Inductor", In Proceedings of SPIE Smart Structures and Materials 2000: Damping and Isolation, Vol. 3989, 2000, pp. 288-299. DOI:10.1117/12.384569   DOI
23 Corr, L. R. and Clark, W. W., "Comparison of Low-Frequency Piezoelectric Switching Shunt Techniques for Structural Damping", Smart Materials and Structures, Vol. 11, No. 3, 2002, pp. 370-376. DOI: 10.1088/0964-1726/11/3/307   DOI
24 Lefeuvre, E., Badel, A., Petit, L., Richard, C. and Guyomar, D., "Semi-Passive Piezoelectric Structural Damping by Synchronized Switching on Voltage Sources", Journal of Intelligent Material Systems and Structures, Vol. 17, 2006, pp. 653-660. DOI: 10.1177/1045389X06055810   DOI
25 Ji, H., Qiu, J., Cheng, J. and Inman, D., "Application of a Negative Capacitance Circuit in Synchronized Switch Damping Techniques for Vibration Suppression", Journal of Vibration and Acoustics, Vol. 133, No. 4, 2011, pp. 041015-1-10. DOI:10.1115/1.4003146   DOI
26 De Marneffe, B. and Preumont, A., "Vibration Damping with Negative Capacitance Shunts: Theory and Experiment", Smart Materials and Structures, Vol. 17, No. 3, 2008, 035015(9pp). DOI:10.1088/0964-1726/17/3/035015   DOI
27 Preumont, A., Mechatronics: Dynamics of Electromechanical and Piezoelectric Systems, Dordrecht, Springer, 2006.
28 Mokrani, B., Rodrigues, G., Ioan, B., Bastaits, R. and Preumont, A., "Synchronized Switch Damping on Inductor and Negative Capacitance", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2065-2075. DOI: 10.1177/1045389X11433493   DOI
29 Jingjun, C., Wei, T., Yanqing, X., Xin, D. and Qiang, L., "Semi-Active Vibration Control Using Self-Sensing Synchronized Switch Damping on Negative Capacitance", Control Conference (CCC), 2015 34th Chinese 28-30 July 2015, pp. 5753-5757. DOI: 10.1109/ChiCC.2015.7260537   DOI
30 Qureshi, E. M., Shen, X. and Chen, J. J., "Vibration Control Laws via Shunted Piezoelectric Transducers: A Review", International Journal of Aeronautical and Space Sciences, Vol. 15, No. 1, 2014, pp. 1-19. DOI:10.5139/IJASS.2014.15.1.1   DOI
31 Park, J. W. and Han, J. H., "Sensitivity Analysis of Damping Performances for Passive Shunted Piezoelectrics", Aerospace Science and Technology, Vol. 33, No. 1, 2014, pp. 16-25. DOI: http://dx.doi.org/10.1016/j.ast.2013.12.010   DOI
32 Niederberger, D. and Morari, M., "An Autonomous Shunt Circuit for Vibration Damping", Smart Materials and Structures, Vol. 15, 2006, pp. 359-364. DOI:10.1088/0964-1726/15/2/016   DOI
33 Lallart, M., Lefeuvre, E., Richard, C. and Guyomar, D., "Self-Powered Circuit for Broadband, Multimodal Piezoelectric Vibration Control", Sensors and Actuators A: Physical, Vol. 143, 2008, pp. 377-382. DOI:10.1016/j.sna.2007.11.017   DOI