• 폴리머
• /
• 제30권6호
• /
• pp.563-567
• /
• 2006

생체 적합성이 우수한 gelatin(GEL)과 기계적 물성이 뛰어난 poly(vinyl alcohol)(PVA)로 이루어진 블렌드막을 $3{\sim}10kV$의 고전장하에서 용액 캐스팅 법에 의해 제조하였고, 막중에 형성되는 미세한 domain 구조의 배향에 미치는 전장의 효과를 조사하였다. 5 kV이상의 높은 전장하에서 제조된 막의 경우 SEM 사진으로부터 막중의 GEL domain이 전장인가 방향으로 배향되어 있음을 관찰하였다. 이는 제막 중 상분리된 두 상의 계면장력 감소에 기인한 Maxwell의 정전 분산 효과에 의한 것으로 해석될 수 있다. 또한, 고전장 인가시 전극 판에서 발생하는 열과 GEL domain의 연신 배향 효과에 의해 PVA/GEL 블렌드막의 결정화도가 증가하는 것을 WAXD와 팽윤거동 관찰을 통해 확인 할 수 있었다.

• Asia pacific journal of information systems
• /
• 제10권3호
• /
• pp.181-197
• /
• 2000

The purpose of this study is to confirm whether the fit between the task and the information characteristics makes any effects on the user satisfaction. The task is defined as two sub-constructs representing the degree of exception and analyzability. The information characteristics is divided into the degree of aggregation, scope and timeliness of information. User satisfaction was used as a surrogate measure of the performance of information systems. The computer self-efficacy was used to control any confounding effects. Field research method using questionnaires was employed to empirically investigate the relationship among the variables. Findings of the study are summarized as follows: the fit between the task and the aggregation of information and between the task and the scope of information turned out to have significant effects on information system performance. The implication of such results is that under highly exceptional or less analyzable task environment, less-aggregated or broad information is more appropriate.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.113-118
• /
• 2012

Mulching vinyl is used on field crops to reduce herbicides and this causes multiple effects. The mulching vinyl must be collected for the next crop season, but was left alone due to a shortage of labor. The used mulching vinyl that was left alone acted as one of the main sources of environmental pollution on farms. In order to solve these problems, a self-propelling vinyl remover was developed. The self-propelling vinyl remover consists of a travelling part and rotating of remover wheel. Each output device has a 1.5ps engine and a 2.5ps engine. The vinyl was twisted 17~47cm/times length. The bobbin's diameter was 160mm and it's stable travelling speed was 0.5m/s. The revolution of the remover wheel bobbin was 60rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10a area, the average working speed was 0.56m/s and the turning time was 15seconds. Therefore, the working performance was 40.1min/10a.

• 한국응급구조학회지
• /
• 제26권3호
• /
• pp.137-148
• /
• 2022

Purpose: This study aims to provide essential data for developing educational methods and content, tailored for the prehospital field situation, by analyzing the effects of education regarding the management of cardiac arrest. Methods: This study is a primitive experimental study of 55 new firefighters in C Fire Service Academy. Data were collected from the training which was imparted using the CPR virtual reality simulation program (CBS 2.0) in accordance with COVID-19 quarantine rules and social distancing. Data were analyzed utilizing SPSS version 25.0. Results: After VR simulation training, knowledge about performing CPR (14.85) and self-efficacy (4.12) were significantly high (p<.001). Learning immersion was also high (3.99±0.59), but learning satisfaction was even higher (4.34±0.62). Depending on the recruitment field, firefighters showed higher learning immersion (4.04±0.58 vs 3.68±0.63) and self-efficacy (4.16±0.55 vs 3.91±0.84) than 119 EMTs' but, there was no significant difference between them. In contrast, The quality of performance of CPR by EMT's was significantly higher than that of firefighters (p=.025). Depending on previous simulation experience, there was no significant difference among dependent variables. Conclusion: Virtual reality simulation shows positive results in learning immersion, learning satisfaction, self-efficacy, and performance of CPR. Therefore, we propose that virtual reality simulation training can be a new educational paradigm.

• Human Ecology Research
• /
• 제55권2호
• /
• pp.193-204
• /
• 2017

This study examines the effect of 5-year-old children's mathematical problem solving ability and their self-esteem based on the Havruta method using math storybooks. The subjects of this study were 40 5-year-old students attending a kindergarten in the Incheon area: 20 students comprised the treatment group and 20 students comprised the control group. An instrument originally created by Ward (1993) but adapted by Hwang (1997) and later modified by Ryu (2003) was used to test the children's mathematical problem solving abilities. A modified version (Kim, 1997) of an instrument developed by Harter and Pike (1984) was used to measure children's self-esteem. Test results were analyzed using SPSS ver. 18.0 for Windows. The findings are as follows. First, the treatment group that had Havruta classes utilizing math story books was found to improve significantly more than the control group in their mathematical problem solving ability. Havruta classes had positive effects on children's mathematical problem solving abilities. Second, there was no significant difference found between the two groups in terms of self-esteem when the children's self-esteem was compared after Havruta classes that utilize math storybooks. It may not be possible to see immediate changes in children's self-esteem because positive parent and teacher feedback had the strongest influence on 5-year-old children's self-esteem, as opposed to self-learning. The results of this study provide meaningful basic data for Havruta classes that focus on questions and discussions through math story books to increase children's mathematical problem solving abilities in the child education field.

• 농촌지도와개발
• /
• 제22권4호
• /
• pp.445-454
• /
• 2015

The purpose of this study was to verify the influence between the variables affecting the Agricultural high school students in career decisions. The results of this study are as follow. First, self-efficacy(${\beta}=.14$, p=.000), perceived usefulness(${\beta}=.52$, p=.000) and social support(${\beta}=.31$, p=.000) were found to be significant according to career decision of agricultural high school student the result of analysis of multiple regression. all regression coefficients were positive. second, perceived usefulness(${\beta}=.52$) was found on the most influential of the three variables. Finally, when students perform studies related to agro-industry can be called self-efficacy are important factors. also The real working environment for the agro-industrial field placement, explore the world of work, ways of understanding reality based on what they learned at school such as university-industry linkage will also be established.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.192-197
• /
• 2008

The value of this paper is to use reduced size apparatuses to perform field measurement in order to identify and validate that the harmonic-current effects are due to the presence of self-excitation capacitance connected at stator's terminals of the studied SEIG. This paper has presented the measured electrical quantities of a three-phase $\Delta$-connected wind induction generator (WIG) under sudden connection and disconnection of resistive loads. An intelligent power-system recorder/monitor has been employed to measure three-phase voltages and currents of the studied system at the terminals of the studied WIG and the load. The measured electrical quantities have been analyzed. Total harmonic distortion (THD) of current using cumulative probability density function has been employed to determine the penetration of harmonic distortion at load side. The results show that the harmonic currents generated by the studied WIG can be severely amplified by the connected self-excited capacitance at the stator's terminals.

• 천문학회보
• /
• 제42권2호
• /
• pp.37.1-37.1
• /
• 2017

Since the seminal work of Perrin, physicists have understood in the context of kinetic theory how ink slowly diffuses in a glass of water. The fluctuations of the stochastic forces acting on water molecules drive the diffusion of the ink in the fluid. This is the archetype of a process described by the so-called fluctuation-dissipation theorem, which universally relates the rate of diffusion to the power spectrum of the fluctuating forces. For stars in galaxies, a similar process occurs but with two significant differences, due to the long-range nature of the gravitational interaction: (i) for the diffusion to be effective, stars need to resonate, i.e. present commensurable frequencies, otherwise they only follow the orbit imposed by their mean field; (ii) the amplitudes of the induced fluctuating forces are significantly boosted by collective effects, i.e. by the fact that, because of self-gravity, each star generates a wake in its neighbours. In the expanding universe, an overdense perturbation passing a critical threshold will collapse onto itself and, through violent relaxation and mergers, rapidly converge towards a stationary, phase-mixed and highly symmetric state, with a partially frozen orbital structure. The object is then locked in a quasi-stationary state imposed by its mean gravitational field. Of particular interests are strongly responsive colder systems which, given time and kicks, find the opportunity to significantly reshuffle their orbital structure towards more likely configurations. This presentation aims to explain this long-term reshuffling called gravity-driven secular evolution on cosmic timescales, described by extended kinetic theory. I will illustrate this with radial migration, disc thickening and the stellar cluster in the galactic centre.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.314-314
• /
• 2010

For the optimal design of a tokamak-type reactor, self-consistent determination of a radial build of reactor systems is important and the radial build has to be determined by considering the plasma physics and engineering constraints which inter-relate various reactor systems. In a low aspect ratio (LAR) tokamak reactor with a superconducting toroidal field (TF) coil, the shield should provide sufficient protection for the superconducting TF coil and the shield plays a key role in determining the size of a reactor. To determine the radial build of a reactor, neutronic effects such as tritium breeding in the blanket, nuclear heating, and radiation damage to toroidal field (TF) coil has to be included in the systems analysis. In this work, the outboard blanket only is considered where tritium self-sufficiency is possible by using an inboard neutron reflector instead of breeding blanket. The reflecting shield should provide not only protection for the superconducting TF coil but also improved neutron economy for the tritium breeding in outboard blanket. Tungsten carbide, metal hydride such as titanium hydride and zirconium hydride can be used for improved shielding performance and thus smaller shield thickness. With the use of advanced technology in the shield, conceptual design of a compact superconducting LAR reactor with aspect ratio of less than 2 will be presented as a viable power plant.

• Steel and Composite Structures
• /
• 제43권1호
• /
• pp.67-77
• /
• 2022

In the current study, ordinary design of Represstessed Pre-Flex (RPF) girder by classical beam theory and numerical model taking buckled shape into consideration were compared with field-survey data to find imperfections on the RPF girder before prestressing and after preflexion. It should be noted that the ordinary design do not consider deformed shape of steel girder in RPF beam. The deformed shapes of steel girder due to the incomplete fabrication that could be caused by self-weight, preflexion misalignment, existence of lateral bracing at mid-span and stiffness of reaction frame were found using a newly developed model which was verified against a deformation survey conducted on actual RPF girder in the field. The final observed deformed shapes of RPF after concrete shrinkage and before prestressing were classified into W, C and Unsymmetric shapes in regard to both survey and analytical results. The deformation survey showed negligible amount of unwanted deformation compared to the large size of the RPF girders. The shallower width of the bottom flange of steel girder caused amount of lateral torsional buckling under self-weight and preflexion thereby affecting the unwanted final overall shape of the RPF girders. However, it was found that the unwanted deformation of RPF girders by fabrication errors even though it is negligible compared to the size of the girder, caused unsymmetrical stress contours in concrete and additional tensile stress and raise some safety issues.