• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.6
• /
• pp.367-373
• /
• 2023

600 MPa-grade deformed bar samples were manufactured by conventional hot rolling and subsequent Tempcore heat treatment processes. Considering the short-time water quenching step of the Tempcore process for hot-rolled steel, it is inevitable that the temperature profile of the deformed bar depends strongly on its position throughout the sample thickness. As a result, its microstructure can be easily divided into two regions, the surface and the core regions. The former is expected to have a fresh martensite microstructure under rapid cooling conditions, but self-tempering occurs due to the intense heat flow from the hot core region after the process. The latter is generally known to exhibit a mixed microstructure of ferrite and pearlite due to its slow cooling rate. In this study, detailed microstructural evolutions were examined through the thickness direction. The large variation of the microstructure through the thickness direction in the deformed bar samples is partly due to the easy carbon diffusion from the limited additions of alloying elements.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.134-142
• /
• 2020

In this study, in order to evaluate the self-healing performance of cement composites the self-healing test method and the analysis method were suggested by applying constant water head permeability test, chloride migration test and repeated bending test. The method of making a cracked specimen and controlling crack width are also proposed. Constant head water permeability test can evaluate the healing performance by using the decreasing rate of water flow passing through the crack zone of a specimen. Furthermore, the equivalent crack width can be used to intuitively investigate the healing effect with healing period. The chloride migration test can evaluate the healing rate by the decreasing rate of the diffusion coefficient obtained by ASTM C 1202. Mechanical healing performance can be evaluated using ISR and IDR estimated from load vs. CMOD relationship graph obtained through the repeated bending test. Finally, the applicability of proposed self-healing evaluation methods was examined by testing mortar specimens with or without self-healing agents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.443-454
• /
• 2020

The purpose of this study is to propose a structural theoretical model that can explain the learning flow of online distance education participants and to clarify the structural causal relationship among related variables that affect the learning flow of cyber university learners. Study results found a modified final model with a statistically significant fit based on the structural research model proposed in this study explained the learning flow of cyber university learners. Second, as a result of verifying the relationship between learning motivation and learning flow of cyber university learners, it was found that intrinsic motivation had a significant positive effect on learning flow. Third, as a result of the empirical verification on the relationship between academic self-efficacy and learning flow of cyber university learners, it was found that academic self-efficacy had a significant effect on learning flow. Fourth, as a result of empirical verification on the relationship between self-directed learning and the learning flow of cyber university learners, it was found that the learner's self-directed learning ability had a significant effect on learning flow. Such research results can be used to suggest a strategic direction for successful settlement and diffusion of a new paradigm of online non-face-to-face distance education, which has recently attracted attention.

• Journal of Agricultural Extension & Community Development
• /
• v.10 no.2
• /
• pp.267-283
• /
• 2003

The purposes of the study were to; 1) examine the diffusion and adoption of new agricultural technology in rice farming, 2) survey the status of agricultural education institutions on technology transfer, and 3) explore the linkages between agricultural education and extension for more effective reinforcement strategies to further the diffusion and adoption of new agricultural technology in Korea. Literature review, field survey and panel discussions were employed to strengthen the linkages among agricultural education, research and extension in Korea. As the results of analysis of the diffusion and adoption of new agricultural technology in rice farming following recommendations were offered; 1. Extension services have helped Korean farmers in achieving self-sufficiency in rice and year-round supply of green vegetables as well as upbringing rural youth, however, government changed the status of extension educators from central government staff to county/city government staff since 1997. This brought about various problems such as: decreased morale and number of extension educators, thus weakening the extension education function, weakened linkages between national and local extension offices, less opportunity for in-service education of extension educators, and weakened linkages between agricultural research and extension, etc. 2. In order to insure that extension educators are high caliber professional individuals, it is crucial to establish a system that nationally recognizes these individuals as such, and that provides a professional development path. It is important to restore the morale of extension educators to continually achieve the national goals of food production, balanced national development and preservation of environment, at the same time to meet increasing needs of farmers. 3. Because of the critical importance of diffusing innovations to agricultural producers in order to ensure quality and steady food supply, it is crucial that these issues be addressed before the extension service further deteriorates. Further research activities on agricultural extension should be conducted for more effective agricultural extension system in Korea to achieve a greater rural, national and regional development. 4. Research and implementation activities should be emphasized and encouraged to improve the cooperation and collaboration among agricultural education research and extension to better serve farmers' educational and information needs. National level research activities should be encouraged to improve the effectiveness of agricultural technology transfer including internet education programs for farmers in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.373-384
• /
• 2009

For the first step on the quantitative evaluation of shrinkage reduction and differential shrinkage analysis of lightweight aggregate concrete, this study sets the moisture transport model of concrete by pre-absorbed water of porous lightweight aggregates and measured effective moisture diffusion coefficient, moisture capacity, degree of humidity supply and degree of humidity consumption by water binder ratio and aggregate type. The effective moisture diffusion coefficient in steady state caused by humidity difference between inside and outside of concrete had low value as low water-binder ratio. And in case of same water-binder ratio, effective moisture diffusion of mixtures used normal aggregates were lower than those used lightweight aggregates. To determine moisture store capability of concrete - moisture capacity, moisture contents were measured in 9 humidity conditions. As a result moisture contents of mixtures used lightweight aggregates was higher than mixtures used normal aggregates in all humidity conditions. This study measured lightweight aggregates' degree of humidity supply that applicable to normal atmospheric environment (above RH 50%) and made it quantitatively. Also amount of moisture release was set as a exponential function that represents a clear trend proportion to time and inverse proportion to humidity of the surroundings. As the result of measurement about degree of moisture consumption inside concrete following the internal consumption caused by cement hydration self-drying, it was showed that rapid decrease of humidity, around 10%, at early ages (7~10 days) when water-binder ratio is 0.3 and slow decrease around 5% and 1% when water-binder ratio is 0.4 and 0.5.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.309-319
• /
• 2011

We experimentally investigated lifted propane jet flames diluted with nitrogen to obtain flame-stability maps based on heat-loss-induced self-excitation. We found that heat-loss-induced self-excitations are caused by conductive heat loss from premixed flame branches to trailing diffusion flames as well as soot radiation. The conductive-heat-loss-induced self-excitation at frequencies less than 0.1 Hz is explained well by a suggested mechanism, whereas the oscillation of the soot region induces a self-excitation of lift-off height of the order of 0.1 Hz. The suggested mechanism is also verified from additive experiments in a room at constant temperature and humidity. The heat-loss-induced self-excitation is explained by the Strouhal numbers as a function of the relevant parameters.

• The Journal of Society for e-Business Studies
• /
• v.11 no.2
• /
• pp.111-134
• /
• 2006

This paper analyzes the resistance to mobile commerce services in consumer adoption process. Relative advantage, compatibility, perceived risk, complexity, self-efficacy, innovativeness and attitude for competing service have been chosen as independent variables. This paper also investigates on the significant factors which resist against adoption of mobile commerce service according to adoption phase. The results show that relative advantage, self-efficacy, perceived risk, attitude for competing service are significant factors to affect resistance to mobile commerce services. Relative advantage, perceived risk, attitude for competing service are significant resistance to mobile commerce services for consumers in before-adoption group and compatibility, complexity, self-efficacy are significant factors for consumers in after-adoption group. This study can be extended to new communication services such as Wibro and DMB to reduce resistances in early adoption phase.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.396-404
• /
• 2011

With increasing of smartphone users various smartphone studies have been carried out. The purpose of this paper is to examine the factors influencing the usage intention of smartphone healthcare application. The influencing factors found from literature reviews on Technology Acceptance Model and the diffusion of innovations theory are user interface design, self-efficacy, innovativeness, and entertainment. Survey is conducted to 220 people in Seoul metropolitan area. The survey results are analyzed regarding the difference for the intention of healthcare application in accordance with respondents' demographic and application usage characteristics. We also examine the difference among four influencing factors by users and non-users. As a result there are significant differences in self-efficacy and innovativeness. This gives some implications to application developers: the system should be easy to use and provide new and useful health contents that can attract early-adopters' attention in order to increase the number of application users.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.353-361
• /
• 2017

As one of Virtual Reality devices, HMD(Head-Mounted Device) helps users to experience an extended actual environment by providing them with virtual environment flexibly through the device. HMD considers user experience as importance as well as technical factors. Therefore, this study intended to analyze how the factors such as information quality, enjoyment, self-efficacy can have influence on the adoption of VR device using the extended technology acceptance model. The results showed that information quality and enjoyment have significant influences on perceived ease of use and usefulness. Self-efficacy only affect perceived ease of use. In addition, perceived ease of use and usefulness have influences on intention to use.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.153-158
• /
• 2008

Fe-aluminides have the potential to replace many types of stainless steels that are currently used in structural applications. Once commercialized, it is expected that they will be twice as strong as stainless steels with higher corrosion resistance at high temperatures, while their average production cost will be approximately 10% of that of stainless steels. Self-propagating, high-temperature Synthesis (SHS) has been used to produce intermetallic and ceramic compounds from reactions between elemental constituents. The driving force for the SHS is the high thermodynamic stability during the formation of the intermetallic compound. Therefore, the advantages of the SHS method include a higher purity of the products, low energy requirements and the relative simplicity of the process. In this work, a Fe-aluminide intermetallic compound was formed from high-purity elemental Fe and Al foils via a SHS reaction in a hot press. The formation of iron aluminides at the interface between the Fe and Al foil was observed to be controlled by the temperature, pressure and heating rate. Particularly, the heating rate plays the most important role in the formation of the intermetallic compound during the SHS reaction. According to a DSC analysis, a SHS reaction appeared at two different temperatures below and above the metaling point of Al. It was also observed that the SHS reaction temperatures increased as the heating rate increased. A fully dense, well-bonded intermetallic composite sheet with a thickness of $700\;{\mu}m$ was formed by a heat treatment at $665^{\circ}C$ for 15 hours after a SHS reaction of alternatively layered 10 Fe and 9 Al foils. The phases and microstructures of the intermetallic composite sheets were confirmed by EPMA and XRD analyses.