• Journal of Environmental Health Sciences
• /
• v.46 no.5
• /
• pp.539-547
• /
• 2020

Objectives: This study was performed to emphasize improvement of the perception of dental hygienists' environmental working conditions by analyzing various factors. Methods: Two hundred ninety-eight female dental hygienists working at 35 medical institutions in Daegu City and Gyeongsangbuk-do Province participated. A self-recording type survey was done in October 2016. Results: Factors influencing the perception of infection control was length of career. Dental hygienists with more experience have a higher level of perception. Factors influencing the perception of working posture was the number of patients per day and career level. Dental hygienists seeing 50 or fewer patients per day and senior staff showed higher levels of this perception. Factors influencing the perception of noise in the working area were length of career and lunchtime break. The perception level was high in the group with longer careers and dental hygienists who rest at lunch time. Factors influencing chemical exposure during work were the number of patients per day and the type of institute. Dental hygienists working in dental clinics or dealing with more patients had lower levels of perception. Conclusions: The sociodemographic and working characteristics of dental hygienists influence the perception of dental hygienists' environmental working conditions.

• ETRI Journal
• /
• v.40 no.4
• /
• pp.511-521
• /
• 2018

The ability to realize human-motion imitation using robots is closely related to developments in the field of artificial intelligence. However, it is not easy to imitate human motions entirely owing to the physical differences between the human body and robots. In this paper, we propose a work chain-based inverse kinematics to enable a robot to imitate the human motion of upper limbs in real time. Two work chains are built on each arm to ensure that there is motion similarity, such as the end effector trajectory and the joint-angle configuration. In addition, a two-phase filter is used to remove the interference and noise, together with a self-collision avoidance scheme to maintain the stability of the robot during the imitation. Experimental results verify the effectiveness of our solution on the humanoid robot Nao-H25 in terms of accuracy and real-time performance.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.3
• /
• pp.65-83
• /
• 2006

Objectives: This is one of the first efforts to describe incidence of alcohol-related problems and to identify environmental correlates associated with them among colleges. Methods: Date were collected by a sample of 105 college administrators who are in charge of student affairs in colleges nationwide through self-administrated questionnaire. Both logistic and linear multiple regression analyses were employed to identify the correlates associated with alcohol-related problems. Results: Most of colleges(76.6%) under study reported to have at least one alcohol-related problem in previous years. Interpersonal violence was alcohol-related problem taken placed most frequently, followed by making noise episode, having property damaged and motor vehicle accidents. Logistic regression analysis identified factors associated with incidents of alcohol related problems. They included being private colleges, numbers of prevention activities, product promotion and marketing by alcohol industry and alcohol accessibility to drinking context. Multiple regression analyses showed that correlates associated with numbers of alcohol-related problems included being a private college, being located in rural area, having drinking density, product promotion and availability of alternative activities to drinking. Conclusions: Environmental correlates were associated with incidence of alcohol related problems in colleges nationwide. Policy implications were discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.43-51
• /
• 2004

In this paper, the element combination algorithm for designing an arbitrary type of the automatic transmissions is proposed. The powertrain simulation software using this algorithm is then developed. The deliveries of the angular velocities and torques are only considered for the motion characteristics of the automatic transmissions. The effects of the vibration and noise are not considered. The automatic transmission is defined by the basic elements, i.e., planetary gear set, clutch, brake, shaft, general gear, and inertia. The transmission system is defined by the combination of these elements. The element combination matrices automatically generate the equations of motion for each shift. The self error-correcting algorithm is also developed to verify the element combination algorithm. This automotive powertrain simulation/design software with user-friendly graphic user interface has two main modules. The first module, the automatic powerflow generation module, mainly consists of the automatic powerflow and component generation algorithms. This paper covers the theory and application for the first module. The second module deals with the automatic system generation algorithm and will be discussed in the second paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1534-1542
• /
• 2009

In this paper we achieve experimental data evaluation using SSB(Single-side band) modulation in the ocean. Present research in underwater communication is applying digital modulation, OFDM(Orthogonal Frequency Division Modulation) and MIMO(Multiple Input Multiple Output) system. However, Commercial modems using analog modulation techniques in oceans. So, we achieved experimental for modem appliance development of correct high quality in South Korea sea characteristics. This experimets achievd useing SSB analog modulation in Jin-hae shore of shallow water condition. We analyzed Doppler effects, reverberation and transmission characteristics for real channel effect analysis. As a result, reverberation and ships self-noise are disturbed factors for underwater communications.

• Journal of Power System Engineering
• /
• v.7 no.2
• /
• pp.29-35
• /
• 2003

The monitoring and diagnostics of the rotating machinery have been received considerable attention for many years. The objectives are to classify the machinery condition and to find out the cause of abnormal condition. This paper describes a classification method of diagnosing the small reciprocating compressor for refrigerators using the artificial neural network and the wavelet transform. In order to extract salient features, the wavelet transform are used from primary noise signals. Since the wavelet transform decomposes raw time-waveform signals into two respective parts in the time space and frequency domain, more and better features can be obtained easier than time-waveform analysis. In the training phase for classification, self-organizing feature map(SOFM) and learning vector quantization(LVQ) are applied, and the accuracies of them ate compared with each other. This paper is focused on the development of an advanced signal classifier to automatize the vibration signal pattern recognition. This method is verified by small reciprocating compressors, for refrigerator and normal and abnormal conditions are classified with high flexibility and reliability.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.5
• /
• pp.362-370
• /
• 2003

This study was conducted to investigate the dietary behavior and utilization of university foodservice in Incheon area. Self administered questionnaires were collected from 305 students. Statistical data analysis was completed using a SPSS v. 10.0 program. The results are summarized as follows: Most students had poor dietary behavior, such as skipping meals. Only 21.4% of male students and 30% of female students responded to have breakfast regularly. About 60% of students were utilizing for lunch at the university foodservice and 3.9% of them for dinner, which mainly caused by the reasons “low price”, “time saving”, “near place”. In particular, only 21% of students used the university foodservice daily. More than 80% of students responded to have lunch at restaurants around campus when they did not have meals at the university foodservice. Reasons for not utilizing the university foodservice were responed as simple menus and tasteless, etc. Recommendations for the improvements of the university foodservice can be summarized as menu variation, emphasis on taste, reducing of noise, expending opening time, reducing waiting time, sanitation, change of old utensils and comfortable atmosphere of dining hall.

• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1449-1454
• /
• 2012

The ion selective microelectrodes (ISME) have been applied to observe the continuous profiles of NO3-N and NH4-N in bulk solutions or biofilms. In order to evaluate the performance and applicability of ion concentration measuring system, the characteristics, such as slope of calibration curve, detection limit and potentiometric selectivity coefficient were investigated. The slopes of calibration curve showed high degree of correspondence for each target ion concentrations. And the detection limits of nitrate and ammonia ion selective microelectrode were 10-4.7 M and 10-4.4 M, respectively. These ion selective microelectrodes were proved that their own performance could be maintained for 16 days after making. NO3-N and NH4-N selective microelectrodes were also adapted to detect the continuous ion profiles of cilia media packed MLE (Modified Ludzack-Ettinger) process. And the monitored nitrate and ammonia ion profiles with the ion selective microelectrode were stable and well corresponded to the results with conventional ion chromatograph. However, the electric potential was unstable until 8 hr because of the unknown noise. The tip shape and performance of the ion selective microelectrode was stably kept over 2 days continuous monitoring.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.60-68
• /
• 2000

This paper describes a design methodology for the CMOS current source which can be implemented in standard memory process. The proposed techniques provide a good characteristic against the power-supply variation by utilizing a self-bias circuit and the reduction of the first-order component of the temperature variation through the new temperature compensation technique and include a new current-sensing start-up circuit enabling a robust operation against the voltage noise generated during the operation of the chip. In addition to the circuit-design technology, techniques where the proposed CMOS current-reference circuit can be applied to the clocking circuits of a very high-speed DRAM are presented. The feasibility of the suggested design methodology for the CMOS current reference is demonstrated by both the analytical method and the circuit simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.530-534
• /
• 2002

In the thesis, For improving the Stability of VCHRO(Voltage Controlled Hair-pin Resonator Oscillator) the new structure using the parallel feedback of the second harmonic is proposed for self-phase locking effect. This module is composed of wilkinson divider, frequency doubler, directional coupler, and bandpass filter using a hair-pin resonator, which are integrated into miniaturized hybrid circuit. The module exhibits output power of 2.5 dBm at 19.5 GHz, -29.83 dBc fundamental frequency suppression and -76.52 dBc/Hz phase noise at 10 kHz offset frequency from carrier of center frequency 19.5 GHz.