• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.57.1-57.1
• /
• 2011

We studied the performance of CdSe nanoparticle in the active layer of organic photovoltaics (OPVs) by changing concentration of the CdSe NPs in the P3HT:PCBM layer. We observed that the absorption peak value gradually increases with the increasing amount of CdSe NPs at 600nm wave length. However, the electrical properties of OPVs correspond less with the tendency of UV/visible result. The highest performance was shown with 10% of CdSe NPs. The device performance decreased after 10% of CdSe NPs, this shows the dependencies of performanc of hybrid solar cells on the CdSe NPs loading amount. The resulting OPVs with 10 % of CdSe NPs show a short circuit current density ($J_{sc}$) of $6.96mA/cm^2$, open circuit voltage ($V_{oc}$) of 0.61V, fill factor (FF) of 0.59, and power conversion efficiency (PCE) of 2.53% under AM 1.5 ($100mW/cm^2$).

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.618-622
• /
• 2004

Excitation spectra of the 1.6 rm emission originating from $Ho^{3＋}$：$^{5}$ I$_{5}$ \longrightarrow$^{5}$ I$_{7}$ transition in fluoride, sulfide, and selenide glasses were measured at wavelengths around 900nm where the fluorescing $^{5}$ I$_{5}$ level is located. In specific energy range where the frequency upconversion populating $^{5}$ F$_{1}$ state happens, the excitation efficiency of the 1.6 fm emission was deteriorated in fluoride and sulfide hosts. In selenide however spectral line shapes of the excitation spectrum and the '$^{5}$ I$_{8}$ \longrightarrow$^{5}$ I$_{5}$ absorption spectrum looked seemingly identical to each other. Differences in optical nonlinearity as well as electronic band gap energy of the host glasses used are responsible for the experimental observations. On the other hand, codoping of rare earths such as Tb$^{3+}$, Dy$^{3+}$, Eu$^{3+}$, and Nd$^{3+}$ was effective in decreasint the terminating $^{5}$ I$_{7}$ level lifetime. However, at the same time, some of the codopants increased unnecessary absorption at the 1.6 $\mu$m wavelengths via their ground state absorption. Though the lifetime quenching effect of Eu$^{3+}$ was moderate, it exhibited no additional extrinsic absorption at the 1.6 $\mu$m band.EX>m band.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.762-764
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1068-1070
• /
• 2004

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.595-596
• /
• 2010

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.305-305
• /
• 2014

포토리소그래피와 도금 공정을 통해 PbSe 나노와이어를 합성하였다. PbSe은 광센서 및 열전 물질로 많이 알려져있다. 이러한 응용처에의 향상된 성능을 위해 본 연구에서는 PbSe 나노와이를 합성하였다. 합성에 사용된 방법인 포토리소그래피와 도금 공정은 반도체 산업 전반에 인프라가 잘 구축된 공정이며, 병렬 공정이다. 따라서 본 연구는 경제적이며 대량생산이 가능한 PbSe 나노와이어의 합성법을 제안한다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.3113-3116
• /
• 2013

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.5
• /
• pp.661-670
• /
• 2006

Selenium (Se) obtained from dietary sources including cereals, grains and vegetables is an essential micronutrient for normal function of the body. Plants convert Se into selenomethionine and incorporate it into proteins in place of methionine, while higher animals synthesize selenoproteins containing selenocysteine. Excessive Se in the body is methylated stepwise to methylated selenium metabolites from selenide. Both inorganic and organic forms of selenium can be the nutritional sources in human, and they are transformed to selenide and then the amino acid selenocysteine attached to a specific $tRNA^{ser(sec)}$. The selenocysteine (Sec) is incorporated into selenoprotein sequences by the UGA codon. The decoding of UGA as Sec requires specific mechanisms because UGA is normally read as a stop codon: cis-acting sequences in the mRNA (the selenocysteine insertion sequence, SECIS, within the 3'untranslated region) and trans -acting factors dedicated to Sec incorporation are required for incorporation of Sec during translation of selenoprotein mRNAs. Approximately 25 selenoproteins have been identified in mammals. Several of these, including glutathione peroxidases, thioredoxin reductases and selenoprotein P, have been purified or cloned, allowing further characterization of their biological function. The antioxidant properties of selenoproteins help prevent cellular damage from free radicals which may contribute to the development of chronic disease such as cancer and heart disease. Other selenoproteins have important roles in regulation of thyroid function and play a role in the immune system. Daily selenium iatake was reported to be $42.0{\pm}16.9{\mu}g/day$ in Korean adult women. This review focuses on the metabolism and biological functions of selenium, and the nutritional status of selenium in the Korean population.

• Korean Journal of Materials Research
• /
• v.23 no.3
• /
• pp.183-189
• /
• 2013

$Cu_2ZnSn(S,Se)_4$ material is receiving an increased amount of attention for solar cell applications as an absorber layer because it consists of inexpensive and abundant materials (Zn and Sn) instead of the expensive and rare materials (In and Ga) in $Cu(In,Ga)Se_2$ solar cells. We were able to achieve a cell conversion efficiency to 4.7% by the selenization of a stacked metal precursor with the Cu/(Zn + Sn)/Mo/glass structure. However, the selenization of the metal precursor results in large voids at the absorber/Mo interface because metals diffuse out through the top CZTSe layer. To avoid the voids at the absorber/Mo interface, binary selenide compounds of ZnSe and $SnSe_2$ were employed as a precursor instead of Zn and Sn metals. It was found that the precursor with Cu/$SnSe_2$/ZnSe stack provided a uniform film with larger grains compared to that with $Cu_2Se/SnSe_2$/ZnSe stack. Also, voids were not observed at the $Cu_2ZnSnSe_4$/Mo interface. A severe loss of Sn was observed after a high-temperature annealing process, suggesting that selenization in this case should be performed in a closed system with a uniform temperature in a $SnSe_2$ environment. However, in the experiments, Cu top-layer stack had more of an effect on reducing Sn loss compared to $Cu_2Se$ top-layer stack.

• Korean Journal of Materials Research
• /
• v.32 no.5
• /
• pp.243-248
• /
• 2022

This study demonstrates a different approach method to fabricate antimony selenide (Sb₂Se₃) thin-films for the solar cell applications. As-deposited Sb₂Se₃ thin-films are fabricated via electrodeposition route and, subsequently, annealed in the temperature range of 230 ~ 310℃. Cyclic voltammetry is performed to investigate the electrochemical behavior of the Sb and Se ions. The deposition potential of the Sb₂Se₃ thin films is determined to be -0.6 V vs. Ag/AgCl (in 1 M KCl), where the stoichiometric composition of Sb₂Se₃ appeared. It is found that the crystal orientations of Sb₂Se₃ thin-films are largely dependent on the annealing temperature. At an annealing temperature of 250 ℃, the Sb₂Se₃ thin-film grew most along the c-axis [(211) and/or (221)] direction, which resulted in the smooth movement of carriers, thereby increasing the carrier collection probability. Therefore, the solar cell using Sb₂Se₃ thin-film annealed at 250 ℃ exhibited significant enhancement in J_SC of 10.03 mA/cm² and a highest conversion efficiency of 0.821 % because of the preferred orientation of the Sb₂Se₃ thin film.