• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.6-11
• /
• 2019

For a wider application of laser direct patterning, selective laser ablation of indium tin oxide (ITO) film on transparent oxide semiconductor (TOS) thin film was carried out using a diode-pumped Q-switched Nd:YVO₄ laser at a wavelength of 1064 nm. In case of the laser ablation of ITO on indium gallium zinc oxide (IGZO) film, both of ITO and IGZO films were fully etched for all the conditions of the laser beams even though IGZO monolayer was not ablated at the same laser beam condition. On the contrary, in case of the laser ablation of ITO on zinc oxide (ZnO) film, it was possible to etch ITO selectively with a slight damage on ZnO layer. The selective laser ablation is expected to be due to the different coefficient of thermal expansion (CTE) between ITO and ZnO.

• 한국산업융합학회 논문집
• /
• 제26권4_1호
• /
• pp.517-527
• /
• 2023

Many techniques have been proposed and investigated for microlens array manufacturing in three-dimensional (3D) structures. We present fabricating a microlens array using selective laser etching and a CO₂ laser. The femtosecond laser was employed to produce multiple micro-cracks that comprise the predesigned 3D structure. Subsequently, the wet etching process with a KOH solution was used to produce the primary microlens array structures. To polish the nonoptical surface to the optical surface, we performed reflow postprocessing using a CO₂ laser. We confirmed that the micro lens array can be manufactured in three primary shapes (cone, pyramid and hemisphere). Compared to our previous study, the processing time required for laser processing was reduced from approximately 1 hour to less than 30 seconds using the proposed processing method. Therefore, micro lens arrays can be manufactured using our processing method and can be applied to mass productionon large surface areas.

• 한국미생물·생명공학회지
• /
• 제37권3호
• /
• pp.238-242
• /
• 2009

분자생물학적 방법에 의한 김치유산균 연구의 진행으로 Leuconostoc, Lactobacillus, Weissella 속 유산균의 김치발효 과정 중 생육에 대한 새로운 결과들이 도출되었지만, Pediococcus속의 생육에 대한 새로운 결과는 거의 보고되지 않았다. 본 연구에서는 김치에 존재하는 Pediococcus 속 유산균의 존재에 대한 재조명을 위하여 ampicillin (A)의 첨가로 pediococci의 선발 유효성이 향상된 것으로 보고된 pediococci selective medium(PSM)+A를 이용하여 pediococci 선택적 검출의 유효성을 검토한 결과, 기존에 보고된 결과와는 달리 Pediococcus pentosaceus 외에도 leuconostocs, Lactobacillus casei, Lactobacillus curvatus, Oenococcus oeni, Streptococcus thermophilus에 대한 생육저해가 발생하지 않았다. PSM+A 한천배지를 이용하여 김치에 생육하는 미생물을 검출한 경우, leuconostocs, P. pentosaceus, Weissella koreensis, Lb. curvatus, Lactobacillus brevis, Lactobacillus sakei가 생육하여 김치와 같은 발효침채류의 발효에 관여하는 pediococci의 선택적 선발에는 PSM+A가 유효하지 않은 것으로 확인되었다.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.575-579
• /
• 2010

The technologies of Ni/Cu plating contact is attributed to the reduced series resistance caused by a better contact conductivity of Ni with Si and the subsequent electroplating of Cu on Ni. The ability to pattern narrower grid lines for reduced light shading was combined with the lower resistance of a metal silicide contact and an improved conductivity of the plated deposit. This improves the FF (fill factor) as the series resistance is reduced. This is very much requried in the case of low concentrator solar cells in which the series resistance is one of the important and dominant parameter that affect the cell performance. A Selective emitter structure with highly dopeds regions underneath the metal contacts, is widely known to be one of the most promising high-efficiency solution in solar cell processing In this paper the formation of a selective emitter, and the nickel silicide seed layer at the front side metallization of silicon cells is considered. After generating the nickel seed layer the contacts were thickened by Cu LIP (light induced plating) and by the formation of a plated Ni/Cu two step metallization on front contacts. In fabricating a Ni/Cu plating metallization cell with a selective emitter structure it has been shown that the cell efficiency can be increased by at least 0.2%.

• Journal of Periodontal and Implant Science
• /
• 제25권2호
• /
• pp.239-251
• /
• 1995

The selective migration, attachment and proliferation of periodontal ligament cells are the desired goal of periodontal regeneration therapy. Fibronectin is well known for an attachment protein for dentin surface. Also, Fibroblast growth factor (FGF) is well known to enhance the periodontal regeneration. The purpose of this study was to evaluation the effect of fibronection and FGF on the attachment rate and the cellular activity. Human gingival fibroblast and periodontal ligament cells were cultured from the teeth extracted for non-periodontal reson. Cultured human gingival fibroblast and periodontal ligament cells in vitro were treated with fibronectin and FGF a various dosage and culture times. Cellular activity was examined by MTT assay. The results of this study was demonstrated that cell attachment rate of experimental group was under the control value at 1st, 2nd, 3rd incubation day. But, at 3rd incubation day, attchment value tended to return to the control value. In case of fibronectin alone application, cellular activity was decreased than that of control at 1st, 2nd incubation day. But 3rd day, cellular activity was returned to the control value. The activity of gingival fibroblast in FGF alone application was decreased thatn that of control at each incubation day. But activity of periodontal cell group was increased cell activities at 2nd, 3rd day. Additionally cellular activity of fibronectin & FGF combined application on gingival fibroblast group was similar to control value at incubation day. But activity of periodontal ligament cell group was increased at 2nd, 3rd day compared with control group.This study demonstrated that combined application of fibronectin & FGF induced the selective chemotaxis for periodontal ligament cell in vitro.

• 한국진공학회지
• /
• 제21권1호
• /
• pp.22-28
• /
• 2012

건물일체형 태양전지는 투명 연료감응형 태양전지 기술을 중심으로 연구개발이 진행되고 있다. 신뢰성-수율 개선 및 대면적화의 필요성 때문에 잘 정립된 박막 공정 기술에 기초하는 Si계 박막 태양전지가 건물일체형 태양전지를 구현할 기술로서 새롭게 조명 받고 있다. Si계 박막 태양전지에 선택적 투과막을 적용하면 가시광선은 태양전지를 투과하고 적외선은 광흡수층으로 반사되기 때문에 투명 태양전지의 변환효율이 향상된다. 본 연구에서는 선택적 투과막의 증착 기술로서 생산성 측면에서 유리한 스퍼터 증착을 이용하여 AlTiO 선택적 투과막을 형성하고 증착 조건을 조절하여 투과율을 향상시켰다.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1601-1608
• /
• 2010

A scandium(III) porphyrin-based fluoride-selective potentiometric sensor and its application in the analysis of hydrofluoric acid is described. Scandium(III) octaethylporphyrin, an ionophore recently developed for the optical fluoride sensor, was employed as a host molecule for the selective binding with fluoride in the plasticized PVC membrane. Nernstian response for $F^-$ between $10^{-4.6}$ to $10^{-1}$ M was observed at a glycine-phosphate buffer (pH 3.0). The selectivity pattern was observed as $F^-$, salicylate $\gg$ $SCN^-$ > $Cl^-$, $Br^-$, $NO_3{^-}$, $ClO_4{^-}$, which is consistent with the binding constant data measured in the plasticized PVC membrane based on a sandwich membrane method. This highly selective and reversible fluoride-sensitive electrode was employed for the analysis of hydrofluoric acid (HF). A disposable differential-type HF sensor was fabricated on the screen-printed electrode and demonstrated its ability to detect the neutral HF in the acidic solution.

• 동아시아식생활학회지
• /
• 제18권5호
• /
• pp.849-860
• /
• 2008

The principal objective of this study was to assess the behavior of customers who visit hotel buffet restaurants. This information will provide us with a good marketing strategy, allowing us to control for different customer characteristics and focus on giving marketers useful clues that make it easy to understand the selective attributes for hotel buffet restaurants. Thus, the application of selective attributes is predicated on the results of the analysis. Additionally, this survey was completed by regular customers. The following are the concrete results of the study. First of all, customer's behaviors differ radically with the selective attributes of hotel buffet restaurants. The most crucial factors were found to be "quality of food", "hygiene & cleanliness", and "service". These factors have nothing to do with customer characteristics & demographic features. "Opinions of their relatives, colleagues" and "experience of restaurants" are all sources that substantially influence the selective attributes of restaurants and this is the only way to survive the ever-changing market situation. Finally, hotel buffet restaurants generally attempt to lure customers with healthy food, special corners, fresh vegetables, and fresh sashimi, as compared to the services provided by hotel outlets. According to upgrade service quality & restaurant interior, also, buffet restaurants tend to provide guests with a more charming. Food service companies should consider the question "what really is service?" and thus seek to provide a variety of events. Preparing for unforeseeable market situations, we should execute efficient marketing strategies in order to assure continued customer satisfaction.

• 자원리싸이클링
• /
• 제29권6호
• /
• pp.114-124
• /
• 2020

시멘트 산업에서 질소산화물 배출은 중요한 문제로 인식되고 있으며 이를 저감하는 기술은 공정변경, 단계적 연소, 저 NOx 버너, SNCR, SCR로 나눌 수 있다. 이중 시멘트 산업에서 가장 많이 사용되고 있는 SNCR 운영만으로는 향후 강화될 배출허용기준을 만족시키기 어려울 것이 예상되며 SCR 등의 추가적인 장비 개선 및 기술 확보가 필요한 상황이다. 이에 따라 최근에는 국외를 중심으로 SNCR 및 SCR 동시 적용 기술, 분진 및 탈질 필터 기술과 NO 산화를 이용한 제거기술 등을 개발하고 있다.

• 한국잡초학회지
• /
• 제30권4호
• /
• pp.454-459
• /
• 2010

비선택성 제초제인 글루포시네이트암모늄액제를 농작업자의 오판에 의한 오용으로 사과나무에 직접 살포된 경우 품종별, 수령별로 나타나는 약해반응과 수확에 미치는 영향을 조사하였다. 사과나무 품종에 따라 약해정도가 다르게 나타났다. 약제살포 당해연도에는 산사 > 쓰가루 > 홍로 > 후지 순으로, 약제살포 다음해에는 후지 > 쓰가루 > 홍로 > 산사 순으로 피해가 나타났으나, 그 피해정도는 당년에 비해 경미하였다. 이듬해, 후지에서는 꽃과 착과정도에서만 30%정도 감소하였으나 쓰가루, 홍로, 산사에서는 개화상태, 착과율 등에서 전혀 피해증상이 관찰되지 않았다. 약해를 받은 당년에 조생종 쓰가루와 중만생종후지 대상으로 각각 수확기 10일전에 사과 중 잔류량을 검사한 결과, 잔류량은 검출한계(0.04ppm) 미만이었다. 그리고 오용 2년 후(2009년)에는 후지, 쓰가루, 홍로, 산사 모두에서 약해증상이 나타나지 않았다.