• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.106-114
• /
• 2017

In this paper, the Selective Harmonic Mitigation-PWM (SHM-PWM) method is used in single-phase and three-phase Cascaded H-Bridge (CHB) inverters in order to fulfill different power quality standards such as EN 50160, CIGRE WG 36-05, IEC 61000-3-6 and IEC 61000-2-12. Non-equal DC link voltages are used to increase the degrees of freedom for the proposed SHM-PWM technique. In addition, it will be shown that the obtained solutions become continuous and without sudden changes. As a result, the look-up tables can be significantly reduced. The proposed three-phase modulation method can mitigate up to the 50th harmonic from the output voltage, while each switch has just one switching in a fundamental period. In other words, the switching frequency of the power switches are limited to 50 Hz, which is the lowest switching frequency that can be achieved in the multilevel converters, when the optimal selective harmonic mitigation method is employed. In single-phase mode, the proposed method can successfully mitigate harmonics up to the 50th, where the switching frequency is 150 Hz. Finally, the validity of the proposed method is verified by simulations and experiments on a 9-level CHB inverter.

• 분석과학
• /
• 제8권4호
• /
• pp.623-630
• /
• 1995

Silicone rubber-based sodium-selective membranes are developed for solid-state ion sensors. It was shown that the potetiometric performance of SR-based membranes are greatly dependent on the type of neutral carriers employed; among the three ionophores, N,N,N',N'-tetracyclohexyl-1,2-phenylenedioxydiacetamide (ETH 2120), bis[(12-crown-4)methyl]dodecylmethylmalonate (D12C4DMM) and monensin methyl ester (MME), examined, only ETH 2120 was compatible with the SR-based matrix. Addition of about 20 wt% plasticizer to the SR-based matrix provided the resulting membranes with potentiometric properties essentially equivalent to those of the corresponding PVC-based membranes. Owing to the strong adhesive strength of SR-based membranes, the CWEs coated \vith those membranes exhibited long lifetime with conventional electrode-like performance. Blending of PU into the SR matrix increased the lifetime of CWEs from two weeks to one month.

• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.311-313
• /
• 2016

The anodic dissolution behavior of copper and brass in an electrolyte solution of 0.5M NaCl containing 0.5 mM $NaHCO_3$ was investigated by electrochemical impedance spectroscopy. The Nyquist plots of the copper impedance described a small loop in the high-frequency range and a large locus in the low-frequency range. Additionally, the features of the impedance spectrum of the brass were similar to those of the copper. This indicates that the copper-enriched layer formed on the brass surface due to the selective dissolution of the zinc from the surface. In addition, the rest potential and the anodic polarization curve for each sample were measured in order to discuss the selective dissolution of the zinc from the brass surface.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.363-368
• /
• 2002

we proposed the use of $Si_2H_ 6/H_2$ chemistry for selective silicon epitaxy growth by low-pressure chemical vapor deposition(LPCVD) in the temperature range $600~710^{\circ}C$ under an ultraclean environment. As a result of ultraclean processing, an incubation period of Si deposition only on $SiO_2$ was found, and low temperature epitaxy selective deposition on Si was achieved without addition of HCI. Total gas flow rate and deposition pressure were 16.6sccm and 3.5mtorr, respectively. In this condition, we selectively obtained high-quality epitaxial Si layers of the 350~1050$\AA$ thickness. In older to extend the selectivity, we kept high pressure $H_2$ environment without $Si_2H_6$ gas for few minutes after first incubation period and then we conformed the existence of second incubation period.

• Membrane and Water Treatment
• /
• 제14권3호
• /
• pp.121-128
• /
• 2023

This study introduces a NaOH/Zn-assisted hydrothermal method for the synthesis of zeolites derived from coal ash (CA). A zeolite/Zn adsorbent is successfully prepared by the activation of CA with NaOH and Zn; it is characterized by a high surface area and a negative surface charge.Methylene blue (MB) and methyl orange (MO) are selected as dye pollutants, and their adsorption onto the zeolite/Zn adsorbent is investigated. Results show the high adsorption capacities of MB and MO and that the negative surface charge facilitates electrostatic interactions between the adsorbates and adsorbents. The zeolite/Zn adsorbents shows the selective adsorption of positively charged dye MB via electrostatic interactions between the =NH+ group (positive dipole) and the oxygen functional group of the adsorbents (negative dipole). The selectivity for the positively charged dye is sufficiently high, with the removal efficiency reaching 99.41% within 10 min. By contrast, the negatively charged dye MO exhibits negligible absorption. These findings confirm the role of electrostatic interactions in the adsorption of MB, in addition to the effect of a large surface area. The results of this study are expected to facilitate the development of simple, eco-friendly, and cost-effective zeolite-based adsorptive composites from CA residuals for the selective removal of dye pollutants from CA waste.

• Current Photovoltaic Research
• /
• 제4권2호
• /
• pp.54-58
• /
• 2016

Laser-doped selective emitter process requires dopant source deposition, spin-on-glass, and is able to form selective emitter through SiNx layer by laser irradiation on desired locations. However, after laser doping process, the remaining dopant layer needs to be washed out. Laser-induced melting of pre-deposited impurity doping is a precise selective doping method minimizing addition of process steps. In this study, we introduce a novel scheme for fabricating highly efficient selective emitter solar cell by laser doping. During this process, laser induced damage induces front contact destabilization due to the hindrance of silver nucleation even though laser doping has a potential of commercialization with simple process concept. When the laser induced damage is effectively removed using solution etch back process, the disadvantage of laser doping was effectively removed. The devices fabricated using laser doping scheme power conversion efficiency was significantly improved about 1% abs. after removal the laser damages.

• Physical Therapy Rehabilitation Science
• /
• 제10권4호
• /
• pp.387-397
• /
• 2021

Objective: The purpose of this case study was to investigate selective region high-frequency diathermy at trigger points with therapeutic exercises on pain, function, balance and gait in older patients with degenerative knee osteoarthritis (DKO). Design: A case report. Methods: The patient who participated in this study was a 71-year-old woman, who had been diagnosed with moderate osteoarthritis with grade II Kellgren & Lawrence grading scale. The intervention consisted of selective region high-frequency diathermy at trigger points, with hip and knee stretching and strengthening exercises. The participant was given assessments before and after every intervention session using the Visual Analogue Scale (VAS), Western Ontario and McMaster Universities Arthritis Index (WOMAC), the Timed Up and Go test (TUG) and the 10 Meter Walk Test (10MWT). The participant performed the intervention 18 times for a total of 30 minutes each. Results: As a result of this study, the patient VAS decreased to 3 points, and the WOMAC decreased to 53 points. In addition, the TUG decreased to 3.25 s and the 10MWT decreased to 1.14 s. Conclusions: The results of this study suggest that selective region high-frequency diathermy at trigger points with therapeutic exercises may be an effective intervention to decrease pain, improve knee function, balance and gait in patients with DKO. The selective region high-frequency diathermy with therapeutic exercises may be feasible and provide potential benefits for rehabilitation of DKO.

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1075-1083
• /
• 2014

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching $5.2^{\circ}C$ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than $35^{\circ}C$ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than $1,600{\mu}mol\;m^{-2}s^{-1}$ at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.

• Bulletin of the Korean Chemical Society
• /
• 제31권3호
• /
• pp.570-576
• /
• 2010

A variety of ynamides undergo highly regio- and stereoselective radical addition of arenethiols with the aid of triethylborane as a radical initiator. The products, N-[(Z)-2-arylsulfanyl-1-alkenyl]amides, can be reduced with triethylsilane in trifluoroacetic acid to yield N-[2-(arylsulfanyl)alkyl]amides.

• 청정기술
• /
• 제25권1호
• /
• pp.63-73
• /
• 2019

연소공정 내에서 질소산화물 배출을 저감하는 선택적 무촉매 환원장치 내부의 화학반응 및 저감효율에 대한 수치해석이 실행되었다. 선택적 무촉매 환원장치에서 저감된 질소산화물은 질소뿐만 아니라 아산화질소로도 전환된다. 아산화질소는 온실가스로써 지구온난화에 영향을 끼치기 때문에 선택적 무촉매 환원장치 내의 질소산화물 제어와 동시에 아산화질소 생성제어가 요구되어진다. 본 연구에서는 선행연구에서 실행된 실험과 온도조건과 가성소다의 첨가량이 동일한 선택적 무촉매 환원장치 내의 전산해석을 실시하고 비교하여 전산해석의 신뢰성을 확인하고, 가성소다 첨가량을 추가적으로 조절하여 질소산화물의 저감 효율과 아산화질소 생성량을 예측하였다. 전산해석은 후단의 측정점을 설정하여 각 물질의 질량분율을 확인하였다. 세부적으로는 측정점에서 유동방향에 수직한 면을 설정하여 온도 조건과 가성소다 첨가량에 따른 각 물질의 평균 질량분율을 비교하였다. 실험값과 전산해석에 의한 모사값은 최대 18.9%의 오차를 보이며 대체적으로 잘 예측됨을 확인하였으며 가성소다 첨가량을 증가시켰을 땐 70% 이상의 제거율의 온도 범위가 넓어지는 것을 확인하였다. 따라서 반응온도의 낙차가 크고 잦은 폐기물 소각시설 등에서 효과적일 것으로 예상된다.