• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.187-191
• /
• 2001

In the paper, an approach to the development of the selective catalytic reduction process of NOx is presented. The reduction process can be efficiently controlled using a conventional combination of feed-forward and feed-back control structures. The aim of this paper is to test and verify an approach to the SCR process which is based on an industrial pilot plant of combustion and nitric oxide formation. The systems are based on measurements of a NOx removal ratio and the fuel flow rate, and NH$_3$slip which are usually available as a part of de-NOx control system.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.187-191
• /
• 2002

The exhaust gas from electric power stations, incinerators and industrial boilers contains considerable amount of harmful nitric oxide which causes air pollution. Selective catalytic reduction system with ammonia as a reductant(NH$_{3}$ SCR) have been applied to remove NOx since 1970. it is widely accepted that the NH$_{3}$ SCR process is the best method for the removal of NOx. In this paper the design of SCR reactor based on the NOx displacement is considered and the design program of SCR reactor is developed. The newly developed design program for de-NOx system maybe used in practice.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.30-34
• /
• 1997

This paper Describe a modelling method for SCR(selective Catalytic reduction) system in refuse incineration plant. We consider the SCR system as a single input single output system. For modelling the SCR system, an auto regressive exogeneous(ARX) modelling method is used. In this case, we should design the white noise input for modelling and put it on the system as an input (.NH/sap2/.), and taken an outlet NOx as an output. From these two relations, we design the ARX model with 45 second delay time and transform to discrete system with 0.5 sampling time. Using the obtained SCR model, we simulate the SCR system to reduce the outlet NOx content by a conventional PID control method.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.415-420
• /
• 2009

Selective Catalytic Reduction(SCR) has been used for the reduction of $NO_x$ in a steam supply boiler. Recently, the reduction of $NO_x$ becomes an important research field because of its negative effect on an environment. Shape optimization of circular poles installed in the chamber, which is located in upstream of a SCR, has been performed using response surface method and three-dimensional Navier-Stokes analysis to enhance gas flow uniformity. Three design parameters, diameter, arranging angle and stretching ratio of circular poles, are considered in the present study. Throughout the shape optimization of a circular pole, gas flow uniformity is successfully increased by decreasing local recirculation flow in a square duct chamber. Recirculation flow observed in the corner of the square duct can be reduced by proper installation of a guide vane or a blunt body. Detailed flow characteristics are also analyzed and discussed.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2000년도 추계 학술발표회 논문집
• /
• pp.229-232
• /
• 2000

산업 현장에서 연소 과정중 발생되는 NOx를 제거하기 위한 방법으로 현재 연구 및 상업 화 대상에서 가장 널리 사용되고 있는 것이 SCR(Selective Catalytic Reduction)과 SNCR((Selective non-catalytic reduction)이다. 그러나, SCR의 경우 높은 장치비와 유지비 가 소요되어, 최근에는 로 내에 요소용액을 직접 분사하여 NOx를 질소와 수증기로 환원시켜 제거하는 방법인 SNCR에 대한 연구가 활발히 진행되고 있는 추세이다.(중략)

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.659-673
• /
• 2021

This study aims to investigate the impact of the High Pressure Selective Catalytic Reduction system (SCR-HP) on a large marine two-stroke engine performance parameters by employing thermodynamic modelling. A coupled model of the zero-dimensional type is extended to incorporate the modelling of the SCR-HP components and the Control Bypass Valve (CBV) block. This model is employed to simulate several scenarios representing the engine operation at both healthy and degraded conditions considering the compressor fouling and the SCR reactor clogging. The derived results are analysed to quantify the impact of the SCR-HP on the investigated engine performance. The SCR system pressure drop and the cylinder bypass valve flow cause an increase of the engine Specific Fuel Oil Consumption (SFOC) in the range 0.3-2.77 g/kWh. The thermal inertia of the SCR-HP is mainly attributed to the SCR reactor, which causes a delayed turbocharger response. These effects are more pronounced at low engine loads. This study supports the better understanding of the operating characteristics of marine two-stroke diesel engines equipped with the SCR-HP and quantification of the impact of the components degradation on the engine performance.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2762-2770
• /
• 2000

The refuse incineration plant has an important role in saving the combustion energy for local heating system. But harmful combustion gas(NOx etc.) leads to some serious environmental problem. To reduce the gas, a SCR(Selective Catalytic Reduction)system is installed and it is controlled by adjusting the flow of ammonia gas(NH3) . In this paper, we apply a repetitive control method to reduce NOx by adjusting the flow of ammonia gas for SCR system in a refuse incineration plant which is located in Haeundae, Pusan, Firstly, we analyze the inlet NOx period by FFt method, and verify its periodic variations. Secondly, we design a repetitive control system by using state space model method. Lastly, the effectiveness of repetitive control system is shown by comparing to a conventional PID control in simulation and experimental results.

• 신재생에너지
• /
• 제20권3호
• /
• pp.1-11
• /
• 2024

Livestock manure solid fuel has been studied as a promising domestic energy resource for reducing greenhouse gas emissions in agricultural fields. To successfully commercialize this technology, the environmental facilities require optimization in accordance with domestic environmental standards. In the present study, a computational analysis model of a livestock manure solid fuel boiler system was developed using Aspen Plus^® to investigate nitrogen oxides (NOx) emissions and NOx conversion efficiency using urea-based selective non-catalytic reduction (SNCR). All data were compared across different livestock species and simulated at various operating temperatures. The simulation showed that NOx emissions were the highest from chicken manure and the lowest from swine manure. However, when converted to an oxygen concentration of 12%, NOx emissions were the highest from cattle manure. Dominant factors influencing NOx emissions through a range of temperatures were analyzed, and the optimal operating temperature range (875-950℃) was derived.

• 청정기술
• /
• 제25권1호
• /
• pp.63-73
• /
• 2019

연소공정 내에서 질소산화물 배출을 저감하는 선택적 무촉매 환원장치 내부의 화학반응 및 저감효율에 대한 수치해석이 실행되었다. 선택적 무촉매 환원장치에서 저감된 질소산화물은 질소뿐만 아니라 아산화질소로도 전환된다. 아산화질소는 온실가스로써 지구온난화에 영향을 끼치기 때문에 선택적 무촉매 환원장치 내의 질소산화물 제어와 동시에 아산화질소 생성제어가 요구되어진다. 본 연구에서는 선행연구에서 실행된 실험과 온도조건과 가성소다의 첨가량이 동일한 선택적 무촉매 환원장치 내의 전산해석을 실시하고 비교하여 전산해석의 신뢰성을 확인하고, 가성소다 첨가량을 추가적으로 조절하여 질소산화물의 저감 효율과 아산화질소 생성량을 예측하였다. 전산해석은 후단의 측정점을 설정하여 각 물질의 질량분율을 확인하였다. 세부적으로는 측정점에서 유동방향에 수직한 면을 설정하여 온도 조건과 가성소다 첨가량에 따른 각 물질의 평균 질량분율을 비교하였다. 실험값과 전산해석에 의한 모사값은 최대 18.9%의 오차를 보이며 대체적으로 잘 예측됨을 확인하였으며 가성소다 첨가량을 증가시켰을 땐 70% 이상의 제거율의 온도 범위가 넓어지는 것을 확인하였다. 따라서 반응온도의 낙차가 크고 잦은 폐기물 소각시설 등에서 효과적일 것으로 예상된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.1020-1033
• /
• 2015

In order to design a compact urea selective catalytic reduction system, numerical simulation was conducted by computational fluid dynamics tool. A swirl type static mixer and a mixing chamber were considered as mixing units in the system. It had great influence on flow characteristics and urea decomposition into ammonia. The mixer caused flow recirculation and high level of turbulence intensity, and the chamber increased residence time of urea-water-solution injected. Because of those effects, reaction rates of urea decomposition were enhanced in the region. When those mixing units were combined, it showed the maximum because the recirculation zone was significantly developed. $NH_3$ conversion was maximized in the zone due to widely distributed turbulence intensity and high value of uniformity index. It caused improvement of $NO_x$ reduction efficiency of the system. It was possible to reduce 55% length of the chamber and connecting pipe without decrease of $NO_x$ reduction efficiency.