• 한국환경과학회지
• /
• 제11권6호
• /
• pp.577-582
• /
• 2002

Selective catalytic reduction and selective non-catalytic reduction processes are mainly used to treat nitrogen oxidants generated from fossil-fuel combustion. Especially, the selective non-catalytic reduction process can be operated more economical and designed more simply than the selective catalytic reduction. For this reason, many researchers carried out to increase the removal efficiency of nitrogen oxidants in the condition of low oxygen concentration by using the selective non-catalytic reduction process. However, this study was flue gas contained high oxygen concentration of 20(v/v%) with ammonia as a reducing agent. Moreover, it carried out experiment with many factors that are reaction temperature, retention time, initial NO concentration, NSR(normalized stoichiometric ratio). It was determined optimal operating conditions to improve NO removal efficiency with SNCR process. The De-NOx efficiency was increased with NSR, initial NO concentration and retention time increasement. This study has NO removal efficiency over 80% in the high oxygen concentration as well as low oxygen concentration. The injection of reducing agent may be considered for SNCR process and facility operation in 850$\^{C}$ of optimal condition.

• 자원리싸이클링
• /
• 제29권6호
• /
• pp.114-124
• /
• 2020

시멘트 산업에서 질소산화물 배출은 중요한 문제로 인식되고 있으며 이를 저감하는 기술은 공정변경, 단계적 연소, 저 NOx 버너, SNCR, SCR로 나눌 수 있다. 이중 시멘트 산업에서 가장 많이 사용되고 있는 SNCR 운영만으로는 향후 강화될 배출허용기준을 만족시키기 어려울 것이 예상되며 SCR 등의 추가적인 장비 개선 및 기술 확보가 필요한 상황이다. 이에 따라 최근에는 국외를 중심으로 SNCR 및 SCR 동시 적용 기술, 분진 및 탈질 필터 기술과 NO 산화를 이용한 제거기술 등을 개발하고 있다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.415-420
• /
• 2009

Selective Catalytic Reduction(SCR) has been used for the reduction of $NO_x$ in a steam supply boiler. Recently, the reduction of $NO_x$ becomes an important research field because of its negative effect on an environment. Shape optimization of circular poles installed in the chamber, which is located in upstream of a SCR, has been performed using response surface method and three-dimensional Navier-Stokes analysis to enhance gas flow uniformity. Three design parameters, diameter, arranging angle and stretching ratio of circular poles, are considered in the present study. Throughout the shape optimization of a circular pole, gas flow uniformity is successfully increased by decreasing local recirculation flow in a square duct chamber. Recirculation flow observed in the corner of the square duct can be reduced by proper installation of a guide vane or a blunt body. Detailed flow characteristics are also analyzed and discussed.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.473-478
• /
• 2008

망간황화물이 NO의 선택적 촉매 환원에 미치는 영향을 반응성 및 속도론적평가와 TPR(Temperature Programmed Reduction), TGA분석을 통하여 고찰하였다. 망간산화물은 $200^{\circ}C$ 이하의 저온에서 우수한 질소산화물 전환을 보였으나, 망간황화물의 경우 황화정도에 따라 질소산화물 전환은 고온으로 전이하였다. 또한 질소산화물 전환율도 황화정도에 따라 감소하였다. TPR 실험결과 망간산화물들은 $160^{\circ}C$ 이하의 낮은 온도에서 환원이 시작되었으나 망간황화물은 $280^{\circ}C$ 이상의 온도에서 환원이 시작되었다. TPR 실험을 통한 환원 시작온도는 촉매의SCR 시작 온도와 관련이 있는 것으로 판단된다. 망간황화물의 활성화에너지는 다른 촉매에 비해 낮게 나타났으나 pre-exponential 상수 크기가 다른 촉매에 비해 1/1000배 만큼 작아 NO에 대한 활성이 낮게 나타났다. 천연망간광석은 함유된 다양한 금속산화물의 영향으로 순수한 망간산화물보다 낮은 온도에서 재생되었다.

• 공업화학
• /
• 제23권6호
• /
• pp.588-593
• /
• 2012

본 연구에서는 LPG (liqufied petroleum gas)를 환원제로 사용하여 질소산화물을 제거하는 SCR (selective catalytic reduction) 반응을 수행하였다. 질소산화물을 제거하기 위하여 HZSM-5 담체위에 Cu와 Fe를 함량을 달리하여 함침 시켜 촉매를 제조하였다. 질소산화물 전환율을 촉매의 종류와 촉매함량, 반응온도를 중심으로 연구하였다. 촉매는 $500^{\circ}C$에서 공기흐름 분위기에서 3 h 동안 소성시켜 제조하였다. Cu는 1~4 wt%, Fe는 0.5~2 wt%가 되게 Si/Al 비가 80인 HZSM-5에 함침 시켰다. 반응실험 결과에 따르면 Cu가 HZSM-5 담체에 3 wt% 담지된 촉매의 전환율이 가장 높았다. 촉매의 특성화를 위하여 XRD, XPS, TPR 분석을 하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.187-191
• /
• 2001

In the paper, an approach to the development of the selective catalytic reduction process of NOx is presented. The reduction process can be efficiently controlled using a conventional combination of feed-forward and feed-back control structures. The aim of this paper is to test and verify an approach to the SCR process which is based on an industrial pilot plant of combustion and nitric oxide formation. The systems are based on measurements of a NOx removal ratio and the fuel flow rate, and NH$_3$slip which are usually available as a part of de-NOx control system.

• 한국환경과학회지
• /
• 제13권6호
• /
• pp.537-542
• /
• 2004

$V_{2}O_{5}/TiO_{2}$ catalysts promoted with Mn were prepared and tested for selective catalytic reduction of NOx in $NH_3.$ The effects of promoter content, degree of catalyst loading were investigated for NOx activity while changing temperatures, mole ratio, space velocity and $O_2$ concentration. Among the various $V-{2}O_{5}$ catalysts having different metal loadings, $V-{2}O_{5}$(1 wt.%) catalyst showed the highest activity(98%) under wide temperature range of $200-250^{\circ}C.$ When the $V-{2}O_{5}$ catalyst was further modified with 5 wt.% Mn as a promoter, the highest activity(90-47%) was obtained over the low temperature windows of $100-200^{\circ}C.$ From Mn-$V_{2}O_{5}/TiO_{2}$, it was found that by addition of 5 wt.% Mn on $V_{2}O_{5}/TiO_{2}$ catalyst, reduction activity of catalyst was improved, which resulted in the increase of catalytic activity and NOx reduction. According to the results, NOx removal decreased for 10%, but the reaction temperature down to $100^{\circ}C.$

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권4호
• /
• pp.201-208
• /
• 2000

The reduction of NO by hydrocarbons was investigated over Cu/Al$_2$O$_3$catalysts using a stainless steel flow reactor under highly oxidising diesel exhaust conditions(up to 15%). Three different Cu loadings(1,5 and 10wt.%) on an $Al_2$O$_3$support were prepared and characterized using spectroscopic techniques. The catalytic activity tests show that different Cu loadings as well as temperature, oxygen, and hydrocarbon concentration levels significantly influence the NO reduction. Increasing Cu loadings up to 5 and 10wt.% decreases the catalytic activities for NO reduction due to the formation of a bulk crystalline CuO phase, as observed from XRD and SEM images. In particular, the visualization of the copper dispersion on the surface using the SEM-BEI technique provides information on the extent of copper saturation, particle size, and the effects on NO reduction. However, the lower Cu loading(1 wt.%) increases the catalytic activity with a temperature window of 720-810K, thereby favoring the formation of well dispersed isolated Cu species, e.g. Cu(sup)2+ ions, which is related to selective NO reduction. The effects of other reaction parameters, such as oxygen, the hydrocarbon level and type, and byproduct emissions are further discussed.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.187-191
• /
• 2002

The exhaust gas from electric power stations, incinerators and industrial boilers contains considerable amount of harmful nitric oxide which causes air pollution. Selective catalytic reduction system with ammonia as a reductant(NH$_{3}$ SCR) have been applied to remove NOx since 1970. it is widely accepted that the NH$_{3}$ SCR process is the best method for the removal of NOx. In this paper the design of SCR reactor based on the NOx displacement is considered and the design program of SCR reactor is developed. The newly developed design program for de-NOx system maybe used in practice.

• 대한환경공학회지
• /
• 제22권11호
• /
• pp.1977-1983
• /
• 2000

천연가스를 사용하는 복합화력발전소에서 발생되는 질소산화물(NOx)에 대한 귀금속촉매(Pt/Zeolite)의 활성을 디젤유를 환원제로 사용하여 파일럿 규모의 선택적촉매환원장치(selective catalytic reduction)에서 환원제 주입량, 반응온도, 공간속도에 따라 고찰하였다. 시험결과, 디젤유의 주입량을 증가시킬수록 NOx의 전환율은 증가하였으며 C/N비(C/N비: 배기가스 중에 포함된 NOx의 분자수에 대한 환원제 탄소 원자수의 비) 5.5 이상에서는 일정한 전환율을 유지하였다. NOx 전환율에 대한 반응온도의 영향을 알아본 결과, 온도가 증가함에 따라 NOx의 전환율이 증가하여 $190^{\circ}C$의 온도에서 최고 50%의 전환율을 보였다. 7,200/hr~27,000/hr의 범위에서 NOx 전환율에 대한 공간속도의 영향은, 18,500/hr까지 일정한 전환율을 유지하였으며 그 이상에서는 감소하였다. 이상의 결과에서 디젤유를 환원제로 사용하는 질소산화물 제거를 위한 SCR 공정의 적용 가능성을 확인할 수 있었다.