• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.44-44
• /
• 2017

The objective of this study was to evaluate firmness, and sweetness index (SI) of tomatoes (Lycopersicum esculentum) by using hyperspectral imaging (HSI) in the range of 1000-1400 nm. The mean spectra of the 95 matured tomato samples were extracted from the hyperspectral images, and the reference firmness and sweetness index of the same sample were measured and calibrated with their corresponding spectral data by partial least squares (PLS) regression with different preprocessing method. The results showed that the regression model developed by PLS regression based on Savitzky-Golay (S-G) second-derivative preprocessed spectra resulted in better performance for firmness, and SI of tomatoes compared to models developed by other preprocessing methods, with correlation coefficients (rpred) of 0.82, and 0.74 with standard error of prediction (SEP) of 0.86 N, and 0.63 respectively. Then, the feature wavelengths were identified using model-based variable selection method, i.e., variable important in projection (VIP), resulting from the PLS regression analyses and finally chemical images were derived by applying the respective regression coefficient on the spectral image in a pixel-wise manner. The resulting chemical images provided detailed information on firmness, and sweetness index (SI) of tomatoes. Therefore, these research demonstrated that HIS technique has a potential for rapid and non-destructive evaluation of the firmness and sweetness index of tomatoes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.515-522
• /
• 2018

An orthogonal frequency division multiplexing with coded direct index modulation(OFDM-CDIM) system that can achieve higher performance and spectral efficiency than previous OFDM systems is proposed. Previous OFDM with index modulation(IM) and OFDM-IM using dual modes systems allocate additional data to indices of respective subcarriers through combining operation with high complexity and then transmit them. However, the proposed system directly allocates the mode selection information to each subcarrier without performing additional operations. Then, the system selects and transmits one symbol in the selected mode. Furthermore, only the data allocated to the index of the subcarrier is encoded, and a good performance improvement effect is obtained with a high code rate. Simulation results show quantitatively that an OFDM-CDIM system using four modes improves bit error rate performance and transmission efficiency in additive white Gaussian noise and Rayleigh fading channel environments compared with a conventional OFDM system using 4-ary quadrature amplitude modulation.

• Korean Journal of Social Welfare
• /
• v.38
• /
• pp.206-233
• /
• 1999

The purpose of this paper is to suggest a scientific evaluation criteria for integration of person with disabilities by developing and measuring the index and indicator of disability integration. Disability integration index will be expressed in a simple number to represent the current situation which will summarize the level of integration of persons with disabilities from the perspective of outcome. Disability integration index is composed of four indicators-social attitude toward person disability, physical environment, participation in society expressed by employment and education, and social institution. Observation research was conducted to measure first two indicators of social attitude and physical environment while existing statistics and data were analyzed for other two of participation in society and social institution. The result of this study showed that disability integration index of Korea was 0.4832. Therefore this paper comes to conclude that the level of integration in Korea approaches to 48 percent which is half of ideal integration. However, this study has its limitations in selection of indicators and index formula which in turn must be followed by next studies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.508-515
• /
• 2019

Although various quantitative indexes are used as criteria for deciding the success of software R & D projects, it is somewhat difficult to find which quantitative indexes are appropriate. In this paper, we propose a quantitative evaluation index generation process for software product development using ISO / IEC25023, which is used as a standard of software quality level, to provide criteria for quantitative evaluation index of software development. The proposed process consists of two stages. In the first step, quality characteristics and subcharacteristics of ISO / IEC25023 standard specification are derived and in the second stage, we derive an evaluation indicator guides that matches the quality characteristics and sub characteristics. The proposed quantitative evaluation index generation process is expected to be helpful for the selection of quantitative evaluation indexes according to the characteristics of software development projects.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.139-147
• /
• 2021

Numerical analysis was performed using FIMMWAVE to optimize the specifications of Si₃N₄/SiO₂ slot and ridge-slot optical waveguides based on confinement factor and effective mode area. The optimized specifications were confirmed based on sensitivity in terms of the refractive index of the analyte. The specifications of the slot optical waveguide, i.e., the width of the slot and the width and height of the rails, were optimized to 0.2 ㎛, 0.46 ㎛, and 0.5 ㎛ respectively. When the wavelength was 1.55 ㎛ and the refractive index of the slot was 1.3, the confinement factor and effective mode area of 0.2024 and 2.04 ㎛², respectively, were obtained based on the optimized specifications. The thickness of the ridge and the refractive index of the slot were set to 0.04 ㎛ and 1.1, respectively, to optimize the ridge-slot optical waveguide, and the confinement factor and effective mode area were calculated as 0.1393 and 2.90 ㎛², respectively. When the confinement coefficient and detection degree of the two structures were compared in the range of 1 to 1.3 of the analyte index, it was observed that the confinement coefficient and sensitivity were higher in the ridge-slot optical waveguide in the region with a refractive index less than 1.133, but the reverse situation occurred in the other region. Therefore, in the implementation of the integrated optical biochemical sensor, it is possible to propose a selection criterion for the two parameters depending on the value of the refractive index of the analyte.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.247-255
• /
• 2021

Individual passenger transfer information is not included in Seoul metropolitan subway Automatic Fare Collection (AFC) data. Currently, basic data such as travel time and distance are allocated based on the TagIn terminal ID data records of AFC data. As such, knowledge of the actual path taken by passengers is constrained by the fact that transfers are not applied, resulting in overestimation of the transport index. This research proposes a method by which a transit path that connects the TagIn and TagOut terminal IDs in AFC data is determined and applied to the transit index. The method embodies the concept that a passenger's line of travel also accounts for transfers, and can be applied to the transit index. The path selection model for the passenger calculates the line of transit based on travel time minimization, with in-vehicle time, transfer walking time, and vehicle intervals all incorporated into the travel time. Since the proposed method can take into account estimated passenger movement trajectories, transport-related data of each subway organization included in the trajectories can be accurately explained. The research results in a calculation of 1.47 times the values recorded, and this can be evaluated directly in its ability to better represent the transportation policy index.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.1
• /
• pp.45-50
• /
• 2014

Productivity analysis is the most important and significant method for evaluating management and engineering performance during whole project stage. However, it is very difficult in developing qualitative index to construction industry comparing to other industries. Therefore, analytical hierarchy process (AHP) is one of the methods for overcoming these limitations by checking consistency index using duality comparison. In this study, it is scraped up an application plan and selection for innovative tools by analyzing survey results on tool users and site managers with respect to using Modified-AHP performance measurement method.

• Journal of the Korean Society for Library and Information Science
• /
• v.9
• /
• pp.99-118
• /
• 1982

This paper first reviews various techniques proposed for automatic indexing with special emphasis placed on statistical techniques. Frequency-based statistical techniques are categorized into the following three approaches for further investigation on the basis of index term selection criteria: term frequency approach, document frequency approach, and probabilistic approach. In the experimental part of this study, Pao's technique based on the Goffman's transition region formula and Harter's 2-Poisson distribution model with a measure of the potential effectiveness of index term were tested. Experimental document collection consists of 30 agriculture-related documents written in Korean. Pao's technique did not yield good result presumably due to the difference in word usage between Korean and English. However, Harter's model holds some promise for Korean document indexing because the evaluation result from this experiment was similar to that of the Harter's.

• Journal of information and communication convergence engineering
• /
• v.14 no.3
• /
• pp.163-170
• /
• 2016

Because of rapid technological advancements, increased data rate support has become the key criterion for future communication medium selection. Multimode optical fibers and multicore optical fibers are well matched to high data rate throughput requirements because of their tendency to support multiple modes through one core at a time, which results in higher data rates. Using the numerical mode solver OptiFiber, we have designed a concentric core fiber by investigating certain design parameters, namely core diameter (µm), wavelength (nm), and refractive index profile, and as a result, the number of channels, material losses, bending losses, polarization mode dispersion, and the effective nonlinear refractive index have been determined. Space division multiplexing is a promising future technology that uses few-mode fibers in parallel to form a multicore fiber. The experimental tests are conducted using the standard second window wavelength of 1,550 nm and simulated results are presented.

• Korean Parent-Child Health Journal
• /
• v.17 no.1
• /
• pp.37-45
• /
• 2014

Purpose: This study aimed to review measurements of environmental health behavior and assess the construct validity of Environmental Health Engagement Profile (EHEP) through confirmatory factor analysis. Methods: The literature review was performed for selection of measurements. Confirmatory factor analysis with AMOS 19.0 was used for validation of EHEP. Results: The model fitness was not appropriate in the one-factor model; $x^2=91.11$ (df=5, p<.001), Comparative Fit Index (CFI)=8.19, Non Normed Fit Index (NNFI)=6.39, and Root Mean Square Error of Approximation (RMSEA)=0.20. The model fitness was appropriate in the two-factor model; $x^2=3.19$ (df=1, p=.074), CFI=9.95, NNFI= 9.71, RMSEA=0.07. A modification of scale was found to be the most suitable for use in the investigation of environmental health behavior. Conclusion: This study confirms that a two-factor model underlies the concept of environmental health behavior. The review of measurements can help nurses and researchers to assess the environmental health behaviors.