• Knowledge Management Research
• /
• v.13 no.3
• /
• pp.55-77
• /
• 2012

Selecting promising technology is becoming more and more difficult due to the increased number and complexity. In this study, we propose hybrid AHP/DEA-AR method and hybrid AHP/DEA-AR-G method to evaluate efficiency of technology alternatives based on ordinal rating data collected through survey to technology experts in a certain field and select efficient technology alternative as promising technology. The proposed method normalizes rating data and uses AHP to derive weights to improve the credibility of analysis, then in order to avoid basic DEA models' problems, use DEA-AR and DEA-AR-G to evaluate efficiency of technology alternatives. In this study, we applied the proposed methods to clean technology and compared with the basic DEA models. According to the result of the comparison, we can find that the both proposed methods are excellent in confirming most efficient technology, and hybrid AHP/DEA-AR method is much easier to use in the process of technology selection.

• Journal of the Korean Society of Costume
• /
• v.21
• /
• pp.219-226
• /
• 1993

The main purpose of this study is to inves-tigate brand loyalty on ready-to-wear of fe-male. The subjects were two hundred ninty females in Taegu. Using SPSS package in or-der to identify relations of clothing selection behavior and information source uses multivariate analysis of variance(MANPVA) univariate analysis of variance(ANOVA) were executed. Scheffe est a kind of post-hoc multiple comparisons methods was adapted. conclusions reached in this study are as follows: 1. Clothing purchase pattern of consumers classified brand loyal group and brand dis-loyal group. The number of people in the brand loyal group was fifty more than that of the brand disloyal group. 2. In relation of brand loyalty and clothing selection behavior brand loyal group had high scores on individuality and exhibition of clothing selection behavior. Brand dis-loyal group had high scors on economy practicality courtesy facility. 3. In difference of information uses on brand loyalty brand loyal group had high scores on printed-information source, broadcast-ing-information source broadcast-ing-information sources. Among them brand loyal group particularly used printed-infor-mation source more than brocasting infor-mation source. On the contray brand dis-loyal group have high scores on human-in-formation source.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.2
• /
• pp.302-310
• /
• 2012

This study was focused on tourists visiting the Chujado, Jeju Special Self-Governing Province as island tourism. First, this study collected the selection attributes visiting Chujado from literature review and applied the IPA (Importance-Performance Analysis)with the attributes to this research. The results are as follows: First, in the area I, the attributes (climates, exotic atmosphere, tourism information, reservation service, a variety of food, clean food etc.) both with high importance and high performance need to be kept continuously. And, in the area II, the IPA map showed that other attributes (accessibility, a variety of food, accommodation, affordable price etc) with high importance and low performance) need to be improved in the future time. These results can give the implications for establishing an appropriate policy of Chujado tourism development.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.451-463
• /
• 2016

The misalignment errors and fluctuations in irradiance due to atmospheric turbulence can severely degrade the performance of free-space optical (FSO) systems. In this paper, we investigate the asymptotic bit error rate (BER) performance and diversity orders of FSO links using parallel transmit-diversity schemes. The BER expressions of FSO links with the switch-and-examine transmit (SET), switch-and-examine transmit with post-selection (SETps), dual-branch transmit laser selection (Dual-TLS), and group transmit laser selection (Group-TLS) schemes are derived, based on an approximate channel model. Then numerical simulations for these four schemes in the region of high average signal-to-noise ratio (SNR) are presented under different channel conditions. The results show that the four transmit-diversity schemes can reduce system complexity and overcome the limitation of peak power, without much BER deterioration.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.260-279
• /
• 2015

In this paper, we investigate physical layer security for multiple decode-and-forward (DF) relaying underlay cognitive radio networks (CRNs) with fixed transmit power at the secondary network against passive eavesdropping attacks. We propose a simple relay selection scheme to improve wireless transmission security based on the instantaneous channel information of all legitimate users and the statistical information about the eavesdropper channels. The closed-form expressions of the probability of non-zero secrecy capacity and the secrecy outage probability (SOP) are derived over independent and non-identically distributed Rayleigh fading environments. Furthermore, we conduct the asymptotic analysis to evaluate the secrecy diversity order performance and prove that full diversity is achieved by using the proposed relay selection. Finally, numerical results are presented to verify the theoretical analysis and depict that primary interference constrain has a significant impact on the secure performance and a proper transmit power for the second transmitters is preferred to be energy-efficient and improve the secure performance.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.264-267
• /
• 2012

This letter analyzes the performance of a two-hop MIMO multiuser relay network with a fixed gain amplify-and-forward protocol and antenna selection at the transmitter and receiver. A new expression for the cumulative distribution function of the highest instantaneous end-to-end signal-to-noise ratio is derived. Based on the above result, closed-form expressions for outage probability and bit error rate are presented. Also, the diversity order of the system is determined. Finally, computer simulations are compared to the analytical results, and insights and observations are provided.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1246-1251
• /
• 1988

The experimental analysis method of stress intensity factors by "slab analogy" which was developed by authors proved itself effective to the determination of stress intensity factors of various shape of through cracks. Its experimental results, however, still has errors more or less 10% in comparison with known theoretical values. In this paper, a newly evaluating method, multi-point selection method, is presented by which these errors were decreased by more than 2%.e than 2%.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.11
• /
• pp.1394-1400
• /
• 1999

This paper presents and efficient improvement of the iterative eigenvalue calculation method and the selection of initial values in AESOPS algorithm. To determine the initial eigenvalues of the system, system state matrix is constructed with the two-axis generator model. From the submatrices including synchronous and damping coefficients, the initial eigenvalues are calculated by the QR method. Participation factors are also calculated from the above submatrices in order to determine the generators which have a important effect to the specific oscillation mode. Also, the heuristically approximated eigenvalue calculation method in the AESOPS algorithm is transformed to the Newton Raphson Method which is largely used in the nonlinear numerical analysis. The new methods are developed from the AESOPS algorithm and thus only a few calculation steps are added to practice the proposed algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.215-221
• /
• 1999

The object of the thermal error compensation system in machine tools is improving the accuracy of a machine tool through real time error compensation. The accuracy of the machine tool totally depends on the accuracy of thermal error model. A thermal error model can be obtained by appropriate combination of temperature variables. The proposed method for optimal variable selection in the thermal error model is based on correlation grouping and successive regression analysis. Collinearity matter is improved with the correlation grouping and the judgment function which minimizes residual mean square is used. The linear model is more robust against measurement noises than an engineering judgement model that includes the higher order terms of variables. The proposed method is more effective for the applications in real time error compensation because of the reduction in computational time, sufficient model accuracy, and the robustness.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.6
• /
• pp.1442-1450
• /
• 2014

The aim of this study is to develop a model for the alternative selection in port privatization using Brainstorming, the ISM and AHP methods. For this, 30 detailed attributing factors were identified by both previous studies and port users, Also, 13 attributing evaluation factors were identified by a group of port experts using the brainstorming method. These were made into a model of hierarchical structure with 3 levels, taking 1 goal factor, 5 evaluation factors and 7 alternative factors using the ISM method. The collected date of questionnaires through the AHP method were analyzed with a group of port experts for an empirical analysis. The result of the hierarchical level 2 shows that profitability is the most important factor, followed by public interest, management professionality, service quality and financial soundness. The analysis results of hierarchical level 3 shows that commercialization is the most important factor.