• 제목/요약/키워드: Segmented architecture

검색결과 79건 처리시간 0.029초

MPEG 시스템용 다중 작업에 적합한 양방향 버스 구조 (Bi-directional Bus Architecture Suitable to Multitasking in MPEG System)

  • 전치훈;연규성;황태진;위재경
    • 대한전자공학회논문지SD
    • /
    • 제42권4호
    • /
    • pp.9-18
    • /
    • 2005
  • 본 논문은 OCP(Open Core Protocol)에 호환되는 파이프라인 구조를 가진 시스템 버스와 MPEG 시스템에 적합한 메모리 버스로 구성된 계층 구조를 가지는 새로운 동기 세그먼트 버스를 제안한다. 이 구조는 MPEG 시스템의 모바일 제품에 사용되는 영상 데이터 처리를 위한 메모리 인터페이스에 기반을 둔 버스 구조와 멀티 마스터와 멀티 슬레이브를 사용하여 고성능의 다중 처리를 위한 양방향 다중 버스 구조(hi-direction multiple bus architecture)를 가진다. 효율적인 데이터 처리를 위하여 파이프라인 스테이지와 결합된 마스터와 슬레이브의 주소번지가 latency를 결정하며, 시스템의 특성에 따라서 각각의 IP 코어를 배치하였다. 제안된 버스는 저전력 구현을 위하여 세그먼트 버스 구조를 가지고, 멀티미디어 SoC 시스템의 성능 저하 없이 다중 작업이 가능한 구조를 가지며 확장이 가능하다. 제안된 버스 구조는 AMBA와 비교하였을 때 bandwidth는 3.7배 증가하였고 latency는 0.25배 감소하였다.

GPU 하드웨어 아키텍처 기반 sub-warp 단위 병렬 프리픽스(prefix) 연산의 정확한 구현 (Correct Implementation of Sub-warp Parallel Prefix Operations based on GPU Hardware Architecture)

  • 박태정
    • 디지털콘텐츠학회 논문지
    • /
    • 제18권3호
    • /
    • pp.613-619
    • /
    • 2017
  • 본 논문에서는 대규모 데이터를 길이가 32 미만인 로컬 세그먼트 단위로 구분하고 이 로컬 세그먼트 내에서 정확한 GPU 병렬 프리픽스(prefix) 연산 결과를 출력하는 CUDA (Compute Unified Device Architecture) 코드를 제시한다. 이미 Mark Harris와 Michael Garland가 이러한 목적을 수행하기 위한 CUDA 코드를 이미 발표한 바 있으나 본 논문에서는 로컬 세그먼트의 길이가 32 미만일 때 기존 코드의 결과가 정확하지 않다는 사실을 살펴 보고 그 원인을 논의한 후, 정확한 결과를 출력하는 코드를 제안한다. 본 논문에서 다루는 로컬 세그먼트 단위의 병렬 프리픽스 연산은 최인접 요소 탐색(k-nearest neighbor search) 등은 물론 다양한 대규모 병렬 처리 알고리즘을 구성하는 기본 연산으로 활용 가능하다.

Extraction of the mode shapes of a segmented ship model with a hydroelastic response

  • Kim, Yooil;Ahn, In-Gyu;Park, Sung-Gun
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제7권6호
    • /
    • pp.979-994
    • /
    • 2015
  • The mode shapes of a segmented hull model towed in a model basin were predicted using both the Proper Orthogonal Decomposition (POD) and cross random decrement technique. The proper orthogonal decomposition, which is also known as Karhunen-Loeve decomposition, is an emerging technology as a useful signal processing technique in structural dynamics. The technique is based on the fact that the eigenvectors of a spatial coherence matrix become the mode shapes of the system under free and randomly excited forced vibration conditions. Taking advantage of the simplicity of POD, efforts have been made to reveal the mode shapes of vibrating flexible hull under random wave excitation. First, the segmented hull model of a 400 K ore carrier with 3 flexible connections was towed in a model basin under different sea states and the time histories of the vertical bending moment at three different locations were measured. The measured response time histories were processed using the proper orthogonal decomposition, eventually to obtain both the first and second vertical vibration modes of the flexible hull. A comparison of the obtained mode shapes with those obtained using the cross random decrement technique showed excellent correspondence between the two results.

분할 구조를 갖는 Leap-Ahead 선형 궤환 쉬프트 레지스터 의사 난수 발생기 (A Segmented Leap-Ahead LFSR Pseudo-Random Number Generator)

  • 박영규;김상춘;이제훈
    • 정보보호학회논문지
    • /
    • 제24권1호
    • /
    • pp.51-58
    • /
    • 2014
  • 스트림 암호 방식에서 사용되는 난수 발생기는 선형 궤환 쉬프트 레지스터(Linear feedback shift register, LFSR) 구조를 주로 사용한다. Leap-ahead LFSR 구조는 기존 다중 LFSR 구조와 같이 한 사이클에 다중 비트의 난수를 발생시킨다. 단지 하나의 LFSR로 구성되기 때문에 하드웨어적으로 간단하다는 장점을 갖지만, 때때로 생성되는 난수열의 최대 주기가 급격히 감소한다. 본 논문은 이러한 문제를 해결하기 위해 세그멘티드 Leap-ahead LFSR 구조를 제안한다. 수학적인 분석을 이용하여 제안된 구조를 검증하였다. 또한 제안된 구조를 Xilinx Vertex5 FPGA를 이용하여 회로 합성후 동작 속도와 회로 크기를 기존 구조와 비교하였다. 제안된 구조는 기존 Leap-ahead LFSR 구조에 비해 최대 2.5배까지 최대 주기를 향상시킨다.

Numerical and experimental analysis of hydroelastic responses of a high-speed trimaran in oblique irregular waves

  • Chen, Zhanyang;Gui, Hongbin;Dong, Pingsha;Yu, Changli
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제11권1호
    • /
    • pp.409-421
    • /
    • 2019
  • Investigation of hydroelastic responses of high-speed vessels in irregular sea state is of major interest in naval applications. A three dimensional nonlinear time-domain hydroelastic method in oblique irregular waves is developed, in which the nonlinear hydrostatic restoring force caused by instantaneous wetted surface and slamming force are considered. In order to solve the two technical problems caused by irregular sea state, the time-domain retardation function and Proportional, Integral and Derivative (PID) autopilot model are applied respectively. Besides, segmented model tests of a high-speed trimaran in oblique waves are performed. An oblique wave testing system for trimarans is designed and assembled. The measured results of main hull and cross-decks are analyzed, and the differences in distribution of load responses between trimarans and monohull ships are discussed. Finally, from the comparisons, it is confirmed that the present concept for dealing with nonlinear hydroelastic responses of ships in oblique irregular waves is reliable and accurate.

Upside-Down 욕조 곡선 형태의 고장 강도를 가지는 세분화 모형 (A Segmented Model with Upside-Down Bathtub Shaped Failure Intensity)

  • 박우재;김상부
    • 한국산업융합학회 논문집
    • /
    • 제23권6_2호
    • /
    • pp.1103-1110
    • /
    • 2020
  • In this study, a segmented model with Upside-Down bathtub shaped failure intensity for a repairable system are proposed under the assumption that the occurrences of the failures of a repairable system follow the Non-Homogeneous Poisson Process. The proposed segmented model is the compound model of S-PLP and LIP (Segmented Power Law Process and Logistic Intensity Process), that fits the separate failure intensity functions on each segment of time interval. The maximum likelihood estimation is used for estimating the parameters of the S-PLP and LIP model. The case study of system A shows that the S-PLP and LIP model fits better than the other models when compared by AICc (Akaike Information Criterion corrected) and MSE (Mean Squared Error). And it also implies that the S-PLP and LIP model can be useful for explaining the failure intensities of similar systems.

A 10-bit Current-steering DAC in 0.35-μm CMOS Process

  • Cui, Zhi-Yuan;Piao, Hua-Lan;Kim, Nam-Soo
    • Transactions on Electrical and Electronic Materials
    • /
    • 제10권2호
    • /
    • pp.44-48
    • /
    • 2009
  • A simulation study of a 10-bit two-stage DAC was done by using a conventional current switch cell. The DAC adopts the segmented architecture in order to reduce the circuit complexity and the die area. The 10-bit CMOS DAC was designed in 2 blocks, a unary cell matrix for 6 MSBs and a binary weighted array for 4 LSBs, for fabrication in a 0.35-${\mu}m$ CMOS process. To cancel the accumulation of errors in each current cell, a symmetrical switching sequence is applied in the unary cell matrix for 6 MSBs. To ensure high-speed operation, a decoding circuit with one stage latch and a cascode current source were developed. Simulations show that the maximum power consumption of the 10-bit DAC is 74 mW with a sampling frequency of 100 MHz.

도시공원 이용자의 목적지 선정에 관한 연구 -광주시를 대상으로- (A Study on Destination Choice of Urban Park Users in Kwangju)

  • 홍성권
    • 한국조경학회지
    • /
    • 제19권3호
    • /
    • pp.128-143
    • /
    • 1991
  • To understand and predict destination choice behavior for urban parks, two hypotheses, which are based on extended Fishbein model, were proposed and tested in Kwangju. Data was analyzed by the citizens of Kwangju and by target markets segmented by demographic variables. Analysis by the citizens of Kwangju showed that postulated hypotheses are true. However, they were partially thru in the other cases : it was a general tendency that suggested model applied well in the high-involvement product. Among the demographic variables, sex was the most useful to understand park choice behavior. Park management directions were suggested, and several future research implications were discussed.

  • PDF

전완골 분절의 전위 이식술 (Segmented Ulnar Transposition to Defect of Ipsilateral Radius in the Forearm)

  • 정덕환;한수홍;이재훈;권부경
    • Archives of Reconstructive Microsurgery
    • /
    • 제16권2호
    • /
    • pp.125-132
    • /
    • 2007
  • Introduction: Ulna is nearly equal to radius in function and bony architecture and strength in forearm. But in lower extremity, fibula is 1/5 of tibia in anatomic and functional point so we can find fibula transposition is commonly used in defect of tibia. We cannot find other article about segmental forearm bone transposition in man. The purpose of this study was to report our clinical and functional result of undergoing segmented transposition of ipsilateral ulna with its own vascular supply in defect of radius in 6 cases. Material and method: From June 1994 to October 2007, 7 segmented bone transpositional grafts in forearm were performed in Kyung Hee Medical Center. The distribution of age was from 20 years old to 73 years old. There was male in 6 cases and female in 1 case. The causes of operation were giant cell tumor in 1 case and traumatic origin in 6 cases; it was nonunion in 2 cases and fracture with severe comminution in 4 cases. Ipsilaterally segmented ulna keeping its own vascular supply was transported to defect of radius in severe traumatic patients and one patient whose tumor in radius had been excised. Transported ulna was fixed to proximal and distal radius remnants by plate and screw. In one case with giant cell tumor, transported ulna was connected to radius across wrist joint as wrist joint fusion. Joint preserving procedures were performed in 6 cases with crushing injury of radius. Results: We could obtain solid bony union in all cases and good functional results. The disadvantage was relative shortening of forearm, but we could overcome this problem. Conclusion: We think that ipsilateral segmented ulna transposition keeping its own vascular supply to radius can be perfomed with one of procedures in cases with wide defect in radius.

  • PDF

모드 연성을 수반하는 분할 모형의 비틀림 감쇠비 추정 (Torsional Damping Estimation of a Segmented Hull Model with Modal Coupling)

  • 김유일;박성건
    • 대한조선학회논문집
    • /
    • 제53권6호
    • /
    • pp.482-493
    • /
    • 2016
  • The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.