• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.527-534
• /
• 2018

The segment of the piston type wave board has been expressed as a submerged vertical line segment in the two dimensional wave flume. Either end of vertical line segment representing wave board could be located in fluid domain from free surface to the bottom of the flume. Naturally the segment could be extended from the bottom to the free surface of the flume. It is assumed that the piston motion of the wave board could be defined by the sinusoidal oscillation in horizontal direction. Simplified analytic solution of the submerged segment of wave board has been derived through the first order perturbation method in water of finite depth. The analytic solution has been utilized in expressing the wave generated by the piston type wave board installed on the upper or lower half of the flume. The wave form derived by the analytic solution have been compared with the wave profile obtained through the CFD calculation for the either of the above cases. It is appeared that the wave length and the wave height are coincided each other between analytic solution and CFD calculation. However the wave form obtained by CFD calculations are more closer to real wave form than those from analytic calculation. It is appeared that the linear solutions could be not only superposed by segment but also integrated by finite elements without limitation. Finally it is proven that the wave generated by the oscillation of flap type wave board could be derived by integrating the wave generated by the sinusoidal motion of the finite segment of the piston type wave board.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.461-469
• /
• 2017

A segment of the wave board has been expressed as a submerged line segment in the two dimensional wave flume. The lower end of the line segment could be extended to the bottom of the wave flume and the other opposite upper end of the board could be extended to the free surface. It is assumed that the motion of the wave board could be defined by the sinusoidal motion in horizontal direction on either end of the wave board. When the amplitude of sinusoidal motion of the wave board on lower and upper end are equal, the wave board motion could express the horizontally oscillating submerged segment of piston type wave generator. The submerged segment of flap type wave generator also could be expressed by taking the motion amplitude differently for the either end of the board. The pivot point of the segment motion could play a role of hinge point of the flap type wave generator. Simplified analytic solution of oscillating submerged wave board segment in water of finite depth has been derived through the first order perturbation method at two dimensional domain. The case study of the analytic solution has been carried out and it is found out that the solution could be utilized for the design of wave generator with arbitrary shape by linear superposition.

• Journal of Information Technology Services
• /
• v.7 no.4
• /
• pp.119-138
• /
• 2008

The KERIS having a central role in education information has selected IT Architecture as a means to provide high quality service for customers; based on this, it intends to lay the groundwork for general information projects to come and perform the IT Governance, the management system for information system. The KERIS set up a mid- and long-term road map in order to introduce and utilize ITA and has been preparing for the introduction of architecture to a proper business sector using architecture approaches by segments(sectors) since 2005. This study presented several cases which organizations can refer to when they introduce architecture while promoting an architecture project; and the details were discussed as follows.ition stage, but planned decision-making will take over when it is proven to be effective with information searching.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.5
• /
• pp.418-426
• /
• 2019

To derive a simplified analytic solution which can be utilized as a fundamental solution for the wave maker design, a segment of the wave board has been idealized as a submerged line segment in a two dimensional domain of a wave flume. The lower end of the line segment could be located at arbitrary depth of the wave flume and the upper end of the board could be also submerged to any depth from the free surface. The freely oscillating motion of the wave board is assumed to be defined by determining the condition of horizontal oscillation on both ends differently. The submerged wave board oscillating in horizontal direction could be specified by selecting the amplitude, frequency and the phase lag differently on lower and upper ends of the board. The simplified two dimensional wave generated by the wave board segment has been obtained by the first order perturbation method. It is found that the general solution of the freely oscillating wave board in two dimensional domain could be decomposed into the solution of flap motion with lower end hinge and swing motion with upper end hinge. The case study of the analytic solutions has been carried out to evaluate the effect on the wave height due to the difference of oscillation frequency, phase difference and variation of stroke between for the motion of both ends. It is found that the solution of the freely oscillating wave board could be utilized for the development of high performance wavemaker especially for irregular waves.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.129-131
• /
• 2004

Elliptic Curve Cryptography (ECC) coprocessors support massive scalar multiplications of a point. We research the design for multi-segment multipliers in fixed-size ECC coprocessors using the multi-segment Karatsuba algorithm on GF($2^m$). ECC coprocessors of the proposed multiplier is verified on the SoC-design verification kit which embeds ALTERA EXCALIBUR FPGAs. As a result of our experiment, the multi-segment Karatsuba multiplier, which has more efficient performance about twice times than the traditional multi-segment multiplier, can be implemented as adding few H/W resources. Therefore the multi-segment Karatsuba multiplier which satisfies performance for the cryptographic algorithm, is adequate for a low cost embedded system, and is implemented in the minimum area.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.14 no.6
• /
• pp.87-97
• /
• 2018

Rainfall depth is an important meteorological information. Generally, high spatial resolution rainfall data such as road-level rainfall data are more beneficial. However, it is expensive to set up sufficient Automatic Weather Systems to get the road-level rainfall data. In this paper, we proposed to use deep learning to recognize rainfall depth from road surveillance videos. To achieve this goal, we collected two new video datasets, and proposed a new deep learning architecture named Temporal and Spatial Segment Networks (TSSN) for rainfall depth recognition. Under TSSN, the experimental results show that the combination of the video frame and the differential frame is a superior solution for the rainfall depth recognition. Also, the proposed TSSN architecture outperforms other architectures implemented in this paper.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.3
• /
• pp.94-105
• /
• 1995

Purposes of this study were to apply and examine that the importance-performance analysis(IPA) could be a useful park management tool. The IPA is an easily-applied technique developed in marketing field to measure attribute importance and performance. It displays them simultaneously on a 4-quardrant action grid; therefore, park managers can upgrade current services and address marketing strategies for various user segments. The children's grand park was selected as a study are. Two different types of questionaires were utilized for data analyses. They were collected from one respondent by on-site distribution or by mail survey, because attribute importance and performance should be rated before and after visiting a park, respectively. Then, total data was segmented systematically by 2 variables-age and benefit sought. Action grids from order to meet the needs of each segment. Several comments on both data collection methods and segment variables selection were described to improve the IPA in recreation settings for future researches.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.6
• /
• pp.73-76
• /
• 2004

This study was conducted to investigate the growth responses of Polystichum lepidocaulon as influenced by 4 different shadings(Control, 50%, 70%, 90%). Under 50 or 70% shading, plant height, stipe length, blade length, blade width, and number of spores increased compared with the other shadings, except the number of frond and shoots. The plants grown under control was shown as smaller with more yellowish green leaf color, and under 90% shading the growth was slightly inferior to those under the 50 or 70% shading. Fresh weight and segment area of frond was better in increased shade levels, but they decreased in under 90% shading. Dry weight and segment thickness decreased as shading increased. Chlorophyll contents increased in proportion to lowered light intensity. Thus, 50 or 70% shading of Polystichum lepidocaulon seemed to maintain the highest growth.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.18-23
• /
• 2015

Time-specific responses of flower bud differentiation were investigated in 'Shinko' (Pyrus pyrifolia Nakai) pear grown at different altitudes from July through December 2013 to determine their suitability as scions in a top-grafting system. Flower bud initiation and bud necrosis were monitored on each of three sections of one-year-old shoots: terminal, middle, and basal. Flower bud differentiation s tarted in September in the highlands of the Lishan area, and in J uly in the lowlands of the Zhoulan area. In Lishan, flower bud differentiation was higher in the middle and basal segments; during leaf fall, however, flower bud differentiation occurred rapidly in the terminal segment. In Zhoulan, flower buds began to differentiate from the terminal section of the shoot, and severe flower bud necrosis was noted. In July, flower buds developed normally; however, in early August, some of the buds at the basal segment showed browning. During leaf fall, some flower buds showed symptoms of necrosis with rapid and complete browning. Flower bud necrosis began at the basal segment and progressed rapidly towards middle and terminal sections. Before leaf fall, flower buds fell off when scales swelled. The terminal and middle parts of the current-year shoots, with some flower buds, collected in October or later from the Lishan area could be used as scions for top-grafting of 'Shinko' pear. Each grafting scion was a 3-5 cm shoot with one flower bud. These results suggest that scions from the terminal and middle segments of stems of 'Shinko' pear from the Lishan area can be used as scions whereas those from Zhoulan area show necrosis and might not be suitable as scions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.177-187
• /
• 2016

To evaluate the tractive performance of tracked trencher on seafloor surface, a new shear stress-displacement empirical model was proposed for saturated soft-plastic soil (SSP model). To validate the SSP model, a test platform, where track segment shear test can be performed in seafloor soil simulacrum (bentonite water mixture), was built. Series shear tests were carried out. Test results indicate that the SSP model can describe the mechanical behavior of track segment with good approximation in seafloor soil simulacrum. Through analyzing the main external forces applied to seafloor tracked trencher during the uniform linear trenching process, a drawbar pull prediction model was deduced with the SSP model. A tracked walking mechanism of the seafloor tracked trencher prototype was built, and verification tests were carried out. Test results indicate that this prediction model was feasible and effective; moreover, from another side, this conclusion also proved that the SSP model was effective.