• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.150-151
• /
• 2004

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.51-52
• /
• 2002

Electro-osmotic flow in a PDMS microchannel of $66{\mu}m\;\times\;200{\mu}m\;\times\;3cm$ has been investigated using a micro PIV system. The field of view was $1056{\mu}m\;\times\;200{\mu}m$ and instantaneous velocity fields were obtained using two-frame cross-correlation method with $64\;\times\;64\;pixels^2$ interrogation window. In this study, we focused on the effect of applied electric field on the variation of internal flow with varying the electric field and seeding particles. The electro-osmotic flow shows a flat velocity profile and the mean velocity is proportional to the applied electric field.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.128-128
• /
• 2022

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.3
• /
• pp.209-218
• /
• 2007

This experiment was conducted to investigate effect of plowing frequency and sowing dates on the agronomic characteristics, feed value, weed yield and palatability of silage corn. Treatments were a basal treatment(C: May 5 seeding, plowing once, weeding control once), T1(May 12 seeding, plowing twice, weeding control 0 time), T2(May 19 seeding, plowing three times, weeding control 0 time, T3(May 26 seeding, plowing four times, weeding control 0 time) and T4(June 2 seeding, plowing five times, weeding control 0 time). The experiment was performed at the College of Life and Natural Sciences of Sangju University in Sangju in 2006. The plant height and ear height showed highly in order to C > T1 > T2 > T3 > T4 treatment, leaf length was the highest at T2 (96.0cm). Leaf width and number of dead leaf were the highest at C and T3 (11.2cm), C, C and T1 (4.6), respectively. Stem diameter was the highest at T3 as 31mm, while T2 was the lowest as 25mm (p<0.05). Ear circle showed highly in order of C > T1 > T4 > T3 > T4 (p<0.05), and tip filling degree was the highest at C treatment as 8.8, while T4 treatment was the lowest as 6.0 (p<0.05). The stem hardness and grain hardness were C < T1 < T2 < T3 < T4 (p<0.05). Stem saccharinity was T1(6.1%) was the highest, while T2(3.0%) was the lowest(P<0.05). Fresh yield of weed was the lowest at C treatment as 500 kg/ha, but T1 treatment was the highest as 44,100 kg/ha (p<0.05). Weed coverage rate showed highly in order of T1 > T2 > T3 > T4 > C treatment (p<0.05). Fresh yield of corn was the highest at C treatment as T3,550 kg/ha, but T4 treatment was the lowest as 65,500 kg/ha (p<0.05). Dry matter yield of corn showed highly in order of C(26,978 kg/ha) > T1(26,130 kg/ha) > T2(20,255 kg/ha) > T3(20,255 kg/ha) > T4(17,508 kg/ha) treatment (p<0.05). Crude protein content was T1(7.69%) > T4(7.42%) > T2(6.34%) > T3(5.99%) > C(5.91%) treatment (p<0.05), and Crude fat content showed highly in order of C (2.13%) > T1(2.04%) > T2(1.96%) > T3(1.95%) > T4(1.84%) treatment. Relative palatability of Holstein, Korean native goat and spotted deer was the highest at C treatment, but Korean native cattle was the highest at T1 treatment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.920-932
• /
• 1994

The combustion phenomena of a reciprocating engine is one of the most important processes affecting performance and emissions. One effective way to improve the engine combustion is to control the motion of the charge inside a cylinder by means of optimum induction system design, because the flame speed is mainly determined by the turbulence at compression(TDC) process in S.I. engine. It is believed that the tumble and swirl motion generated during intake breaks down into small-scale turbulence in the compression stroke of the cycle. However, the exact nature of their relationship is not well known. This paper describes cycle resolved LDV measurement of turbulent flow inside the cylinder of a 4-valve engine under motoring(non-firing) conditions, and studies the effect of intake port configurations on the turbulence characteristics using following parameters ; Eulerian temporal autocorrelation coefficient, turbulence energy spectral density function, Taylor micro time scale, integral time scale, and integral length scale.

• Korean Journal of Plant Resources
• /
• v.29 no.5
• /
• pp.574-578
• /
• 2016

For the last few decades, much research has been tried to improve crop’s characteristics such as crop yield, quality, seeding period and environmental adaptability. In this paper, the effect of nanobubbles on the germination rate of barley seed is experimentally investigated. The air nanobubble was generated in water by gas-liquid mixing method. The results were shown that the mean diameter and concentration of nanobubble fabricated in DI water are 133 ㎚ and 8.59✕10⁸ particles/㎖, respectively. Also, the seed germination rate for the nanobubble water was approximately 40 % higher than that of pure water.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.293-297
• /
• 2000

Multiseeding with (100)/(100) grain junctions of top-seeded melt growth (TSMG) processed YBCO superconductors was studied. The effect of the number of seeds and the distance between two seeds on the levitation forces and the trapped magnetic fields of the TSMG-processed YBCO samples was investigated. Multiple seeding shortened the processing time for the fabrication of TSMC-processed YBCO superconductors. The large magnetic field was trapped at the grain junction when two seeds was placed without spacing, while the amount of the magnetic field decreased when the seed distance increased. This is attributed to the increased amount of the residual melt phases around the grain junctions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.310-310
• /
• 2011

Morphological evolution of amorphous carbon film is investigated by molecular dynamics simulation. Here, energetic carbon atoms (75 eV) are deposited on the diamond (001) substrate to find effect of incidence angles. At normal and near-normal incidences ($0^{\circ}{\sim}30^{\circ}$) atomically smooth surfaces are observed during their growth. However, rough surfaces emerge and develop into a ripple structure at grazing incidences ($60^{\circ}{\sim}70^{\circ}$). The different growth modes according to the incidence angles can be described by impact-induced displacements of atoms. Downhill transport along any sloped surfaces is predominant for the case of normal incidence. As the incidence angles become grazing, uphill transport is allowed along the surfaces, which have smaller slopes than incidence angle, so the surface features can be amplified. Impact-induced transport and self-shadowing effect can be responsible to the initial growth of seeding structures at a grazing incidence, which would be grown up as tilted columnar structures in further depositions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.4
• /
• pp.241-246
• /
• 2002

Rye-hairy vetch mixture would be recommended fur produce higher yield and conserving soil environment. This experiment was conducted to investigate the effect of planting and harvest dates on quality and productivity of rye-hairy vetch mixture. Plant height of rye and hairy vetch was increased with delayed harvest dates, but it found that there was on significant difference among seeding dates. The dry matter(DM) content was increased with delayed harvest dates, and it showed 30% DM in mid-May. Crude protein(CP) content was decreased sharply from 17~18% in heading stage to 9~10% in flowering stage. The content of ADF(Acid detergent fiber) and NDF(Neutral detergent fiber) were increased with delayed harvest date, but IVDMD(In vitro dry matter digestibility) and TDN(Total digestible nutrient) were decreased. The change of dry matter yield was affected significantly by harvest date but was not by seeding time. The results of this experiments indicated that harvest in late-April would be recommended to produce the highest yield and quality if it is considered to cultivate com fur silage. Harvest in mid-May would be recommendable with the cultivation of early maturity silage corn or sorghum $\times$ sudangrass hybrids.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.105-109
• /
• 1994

This experiment was conducted to know the labor saving effect and reducing production cost by agricultural mechanization in the cultivation of Bupleurum falcatum. Labor reducing effects of the drilling seeder by hand and the machine attached to two wheel tiller were 97%, but emergency rate was highest in the former. Dry root yield per plant was increased by low amount of seed sowing but that yield per unit area was increased at much seeding amount in the seeder attached to the tiller. The drilling seeder by hand was showed highest standing ratio of seedling and produced yield to 84.1kg of root yield per 10a. Labor saving effect was the best at the multipurposes mechanized harvester and labor saving and famer's income ratio were increased to 69% and 50% respectively. Labor time and cost were reduced to 74% and 69% respectively by mechanization of sowing and harvest cultivation practice on Bupleurum falcatum.