Abstract
This experiment was conducted to investigate effect of plowing frequency and sowing dates on the agronomic characteristics, feed value, weed yield and palatability of silage corn. Treatments were a basal treatment(C: May 5 seeding, plowing once, weeding control once), T1(May 12 seeding, plowing twice, weeding control 0 time), T2(May 19 seeding, plowing three times, weeding control 0 time, T3(May 26 seeding, plowing four times, weeding control 0 time) and T4(June 2 seeding, plowing five times, weeding control 0 time). The experiment was performed at the College of Life and Natural Sciences of Sangju University in Sangju in 2006. The plant height and ear height showed highly in order to C > T1 > T2 > T3 > T4 treatment, leaf length was the highest at T2 (96.0cm). Leaf width and number of dead leaf were the highest at C and T3 (11.2cm), C, C and T1 (4.6), respectively. Stem diameter was the highest at T3 as 31mm, while T2 was the lowest as 25mm (p<0.05). Ear circle showed highly in order of C > T1 > T4 > T3 > T4 (p<0.05), and tip filling degree was the highest at C treatment as 8.8, while T4 treatment was the lowest as 6.0 (p<0.05). The stem hardness and grain hardness were C < T1 < T2 < T3 < T4 (p<0.05). Stem saccharinity was T1(6.1%) was the highest, while T2(3.0%) was the lowest(P<0.05). Fresh yield of weed was the lowest at C treatment as 500 kg/ha, but T1 treatment was the highest as 44,100 kg/ha (p<0.05). Weed coverage rate showed highly in order of T1 > T2 > T3 > T4 > C treatment (p<0.05). Fresh yield of corn was the highest at C treatment as T3,550 kg/ha, but T4 treatment was the lowest as 65,500 kg/ha (p<0.05). Dry matter yield of corn showed highly in order of C(26,978 kg/ha) > T1(26,130 kg/ha) > T2(20,255 kg/ha) > T3(20,255 kg/ha) > T4(17,508 kg/ha) treatment (p<0.05). Crude protein content was T1(7.69%) > T4(7.42%) > T2(6.34%) > T3(5.99%) > C(5.91%) treatment (p<0.05), and Crude fat content showed highly in order of C (2.13%) > T1(2.04%) > T2(1.96%) > T3(1.95%) > T4(1.84%) treatment. Relative palatability of Holstein, Korean native goat and spotted deer was the highest at C treatment, but Korean native cattle was the highest at T1 treatment.
본 실험은 파종시기 및 경운횟수가 옥수수의 생육특성, 건물수량, 영양수량 및 사일리지 기호성에 미치는 영향을 구명하기 위하여 파종시기 및 경운횟수를 통한 5처리(C : 파종 5월 5일, 경운회수 1회, 인력제초 1회, T1 ; 파종 5월 12일, 경운회수 2회, T2 : 파종 5월 19일, 경운회수 3회, T3 : 파종 5월 21일, 경운회수 4회, T4 : 파종 6월 2일 경운회수 5회) 3반복으로 2006년 5월부터 2006년 10월까지 상주대학교 부속 실습농장내 사료포장에서 실시하였으며, 그 결과를 하면 다음과 같다. 초장과 착수고는 C > T1 > T2 > T3 > T4구순으로 높게 나타났지만 초장에서는 유의적인 차이가 없었으며 착수고에서는 처리구간 유의적인 차이를 보였다(p<0.05). 엽장은 T2가 96.0cm로 가장 길게 나타났지만 처리구간 유의적인 차이는 나타나지 않았다. 엽폭은 C와 T3구가 (11.2cm), 고사엽은 C 및 T1구가 각각 4.6엽으로 가장 높게 나타났다. 경의 굵기에 있어서는 T3구가 31mm로 가장 높았던 반면 T2구가 25mm로 가장 가늘게 나타났다(p<0.05). 암이삭 둘레는 C(17.1 cm) > T1(15.6 cm) > T4(15.4 cm) > T3(15.3 cm) > T2(15.2cm) 순으로 높게 나타났으며(p<0.05), 암이삭 충실도는 C구가 8.8로서 가장 높았던 반면 T4구가 6.0으로서 가장 낮게 나타났다 (P<0.05). 경의 경도와 알곡 경도는 파종시기가 빠른 순 인 C > T1 > T2 > T3 > T4순으로 나타났다(p<0.05). 그리고 경의 당도는 T1구가 6.1%로 가장 높고, T2구가 3.0%로 가장 낮게 나타났다(p< 0.05). 잡초 발생량은 C구가 500 kg/ha으로 가장 적게 T1구가 44,100 kg/ha로서 가장 높게 나타났으며 (P<0.05), 잡초의 피복도는 T1 > T2 > T3 > T4 > C구순으로 높게 나타났다(p<0.05). 생초수량은 C구가 73,550 kg/ha로서 가장 높았던 반면 T4구가 65,500 kg/ha로서 가장 낮은 수확량을 보였다(p<0.05). 건물수량에 있어서는 C(26,978 kg/ha) > T1(26,130 kg/ha) > T2(20,255 kg/ha) > T3(20,255 kg/ha) > T4(17,508 kg/ha)구 순으로 높게 나타났다(P<0.05). 조단백질 함량은 T1 > T4 > T2 > T3 > C구순으로 높았으며(p<0.05), 조지방은 C > T1 > T2 > T3 > T4구순으로 높았다. 상대기호성은 Holstein, 염소 및 꽃사슴에서는 C구가 가장 높은 기호성을 보였으나 한우에서는 T1구가 가장 높게 나타났다.