• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.4
• /
• pp.383-388
• /
• 2009

This study was conducted to investigate the dry matter intake, weight gain and the required area of grazing pasture for dairy goats. The experimental trials were conducted from April, 2007 to June, 2008 at the animal experimental station in Chungnam National University. The seed mixtures of grazing pasture were composed of orchardgrass (40%) + tall fescue (20%) + perennial ryegrass (10%) + alfalfa (15%) + red clover (15%). The grazing area was $5,000\;m^2$ which was composed of 4 paddocks (average $1,250\;m^2$/plot) and the goats were grazed twelve times by a rotational grazing system. The dairy goats (Saanen) were selected which had nearly the same body weight (average 31.1kg). The average chemical composition of herbage of mixture in grazing periods was crude protein (20.4%), NDF (65.3%) and ADF (31.1%) respectively and the in vitro dry matter digestibility was 68.9%. The average dry matter intake amount per head was 1.253 kg, and the intake amount per body weight was 3.01%. The average body weight gain during the grazing periods (184 days) was 17.4 kg, and the daily gain was 98 g. The required area of grazing pasture was calculated at $467.7\;m^2$ a dairy goat (weight 50 kg basis). This figure, being converted into animal unit (AU), corresponded to approximately 2.14 AU/ha.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.30-38
• /
• 2018

This study was conducted to explore the effects of seeding rate of a seed mixture on grassland productivity and botanical composition. Seeding rates were composed of four different treatments varying by the amount of seed: T1, 50% decrease in seeding rate from standard; T2, standard seeding rate; T3, 50% increase in seeding rate from standard; and T4, 100% increase in seeding rate from standard. In 2016, seasonal changes in grass botanical composition revealed T2, T3, and T4 in portion of grass ratio were the highest with a range of 87-100%, whereas T1 was the lowest of all treatments. In 2017, the botanical composition in T1 showed that the grass ratio in of the first cutting was 91%, but in the fourth cutting its ratio decreased by 75%. The results from both years were combined for each treatment, T4 ($11,435kg\;ha^{-1}$) and T3 ($11,162kg\;ha^{-1}$) demonstrated the highest dry matter yield of the treatments (T1: $8,196kg\;ha^{-1}$; T2: $9,521kg\;ha^{-1}$) (p<0.05). As a result, a 50-100% increase in the seeding rate from the standard demonstrated the best grassland yield and botanical composition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.97-124
• /
• 1976

To find out the most effective method of treatments for the induction of sprouting of dormant seed potato pieces for the fall crop production of Irish cobbler, this experiment was carried out with sprout inducing bed and field performance trial. In GA treatments, about 10 days were required to sprout and resulted uniform and thin 3-4 sprouts per tuber piece, but sprouts were slender and rooting was not observed. In Ethrel treatments, 20-25 days were required, and sprouts were inferior than that of GA treatment in uniformity of sprouting, and percentage of rotten pieces and of healthy sprouted tuber pieces, but number of sprouts per tuber pieces was low, being 1-2, and sprouts were short, thick, and healthy, and showed good rooting. In GA and Ethrel mixture treatments, 1-2 more days were required to sprout than GA treatments, but sprouts were relatively healthy, and other sprouting pattern were like that of GA treatments. In Ethylene chlorohydrin and 6-Benzyl-adenine treatments, sprouting was like that of Ethrel treatments, but much more days were required than Ethrel treatments and tendency of severe rotting was observed. Optimum treating methods of promising chemicals found to be 1-2 and 2-5 ppm GA solution, 500 and 1000-2000 ppm Ethrel solution, and 1-2＋250-500 and 5＋250-500 ppm GA and Ethrel mixture solution for 60 min. treatment of tuber piece and whole-tuber, respectively. Induction of sprouting in dry and hot time resulted severer rotting of tuber pieces during the induction of sprouting and with the advancement of dormancy, being delayed in date of treatment, tendency of promotion of sprouting and rooting was observed. When sprouted tuber piece was transplanted at the same date, yields were in order of Ethrel, GA and Ethrel mixture, and GA treatment, indicating the correlation between yield and healthiness of sprout and rooting status of sprouted tuber piece. In all treatments, earlier transplanting resulted higher yields.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.371-382
• /
• 2023

This study aimed to estimate optimal treatment for enhancing the germination rate and disinfections effect of organic wheat varieties, Jokyung, Geumgang, Saegumgang, and Baekgang using hot water treatment and lime sulfur mixture. Before disinfection, the germination rates of the seeds averaged 86.3±2.5% to 87.5±2.9%, while the infection levels caused by fungi and bacteria were observed to be 22.5±2.9% to 38.3±2.5% and 18.8±4.8% to 23.8±2.5%, respectively. The germination rates of four wheat varieties under hot water treatments were either the same or higher compared to untreated seeds. As the temperature and treatment time of hot water treatment increased, the contamination levels of fungi and bacteria decreased. The optimal hot water treatment for the seeds was observed at 55℃ for 10 minutes, resulting in germination rates averaging 90.0±0.0% to 97.5±2.9%, which were either the same or higher than untreated seeds. The disinfection effectiveness against fungi and bacteria was high, averaging 83.3~93.5% and 100%, respectively. Additionally, an investigation was conducted on the germination rates and microbial disinfection efficacy of 0.2% and 0.4% lime-sulfur mixture with varying treatment times, 3 to10 minutes for each wheat variety. As the treatment time elapsed, no significant differences in germination rates were observed among four wheat varieties. However, the germination rates were higher compared to the untreated group (86.3~87.5%), and the optimal treatment time was found to be 7 minutes or 10 minutes, resulting in an average reduction of 90.0~96.0% in contamination levels of fungi and bacteria. Therefore, the germination rates and disinfection effects varied depending on the treatment conditions of hot water treatment and lime-sulfur mixture applied for the disinfection of the four varieties of organic wheat seeds. However, it is considered that treating the seeds with hot water treatment at 55℃ for 10 minutes or with 0.2% or 0.4% lime-sulfur compound for 10 minutes enhances germination rates and reduces the contamination rate of fungi and bacteria compared to untreated seeds. Thus, these environmentally friendly seed disinfection technologies are likely to be highly useful in agricultural fields.

• Korean journal of applied entomology
• /
• v.50 no.1
• /
• pp.47-53
• /
• 2011

The seasonal occurrence of Riptortus pedestris Fabricius was investigated using pheromone traps baited with its aggregation pheromone in the fields with various crop composition (mixture culture of barley and hairy vetch in Asan, Chungnam; monoculture of hairy vetch in Yuseung, Daejeon) from mid-May to mid-July of seed gathering season in 2010. The invasion of R. pedestris into the experimental fields began to increase rapidly from late-June in which period hairy vetch and barley reach the beginning of seed formation stage. After seed gathering season in mid-July, the invasion rate of R. pedestris decreased, and the activity was continually observed till early-November. In addition to dominant R. pedestris species, 33 species of hemiptera including Apolyaus watajii, Dolycoris baccarum, Adelphocoris suturalis, and Yemma exlis were collected, which indicated abundant species diversity in the hairy vetch fields. In the laboratory, R. pedestris did not developed successfully to adult stage on food sources of hairy vetch, with decreasing survival rate after 4th instar and the failure of emergence to adult stage. Also, R. pedestris showed higher preference on soybeans than hairy vetch. Consequently, hairy vetch may be not true host for the development and survival of R. pedestris. It is considered that R. pedestris is a temporary visitor at the season of seed formation in hairy vetch fields.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.715-721
• /
• 2007

Residual calcium concentration is high, in general, at the effluent of the fluoride removal process in the electronics industry manufacturing semiconductor and LCD. To increase the stability of the membrane process incorporated for reuse of wastewater, the residual calcium is required to be pre-removed. Hyperkinetic Vortex Crystallization(HVC) process was installed in the electronics industry manufecturing semi conductor as a pilot scale for accelerating calcification of calcium ion. Compared to the conventional soda ash method, the 31% higher calcium removal efficiency was achieved when HVC was applied at the same sodium carbonate dosage. In order to maintain the economic calcium removal target of 70% preset by manufacturer, the dosing concentration of the soda ash was 530 mg/L based on influent flowrate. The seed concentration in the reactor was one of the critical factors and should be maintained in the range of $800\sim1,200mg$ SS/L to maximize the calcium removal efficiency. The calcite production rate was 0.30 g SS/g $Na_2CO_3$ in the average. The economic HVC passing time of the mixture was in the range of $2\sim5$ times. Relatively, stable calcium concentration was maintained in the range of $30\sim72$ mg/L(average 49 mg/L) although the calcium concentration in the feed was severely fluctuated with $74\sim359$ mg/L(average 173 mg/L). The HVC process was characterized as environment-friendly technology reducing chemical dosage and chemical sludge production and minimizing maintenance cost.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.4
• /
• pp.258-264
• /
• 1998

This study was conducted to establish mass propagation system from seeds of Lavandula angustiolia Mill. Only 4% of dry seeds were germinated when they were incubated in $4^{\circ}C$. Germination rate of stratified seeds for 9 weeks was 15% higher in light than darkness. Soaking with 1000mg/l of $GA_3$ was helpful to overcome the effect of darkness. The optimal temperature for germination was $25^{\circ}C$ for the seeds that were treated with$GA_3$, solution. For the improvement of germination rates, pretreatment of $GA_3$ at 500-2000mg/l showed about 75% of germination, and in the combination treatment of $GA_3$, and BA, germination rate increased by about 10% in the treatment of 1000mg/l $GA_3+10mg/l$ BA compared with the 1000mg/l $GA_3$ treatment. Cold stratification treatment was very effective for seed germination, and over 70% of seeds were germinated when they were incubated in $4^{\circ}C$ for 9-12 weeks. In addition, there was synergic effect on the seed germination subject to stratification and 1000mg/l $GA_3$, treatment for 6 months. In the mixture of vermiculite: peatmoss (1 : 1, v/v), emergence rate was 6.7% in control and 65% in 1000mg/l $GA_3$ treatment, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.1
• /
• pp.9-16
• /
• 2016

To investigate the effect of soluble silicate zeolite dressing of the rice against bakanae disease, field trial in reclaimed land and in vitro were carried out. The coated rice seeds (SCS) which were dressed with the mixture of 25% silicic acids (binder), and the zeolite (coating powder). In wet direct seeding, uniform scattering of rice seeds on the soil surface and the better seedling establishment were shown in SCS treatment plots. The incidence of bakanae disease began from the mid tillering stage toward the heading stage. Around heading stage, the ratio of infected tillers reached its highest point by 9.9% in non-SCS treatment plots. While, in SCS treatment plots, the ratio of infected tillers was no more than 0.01%. The vitality of the pathogenic fungi of bakanae disease in the SCS and non-SCS samples were assessed. Samples were incubated for one week keeping proper humidity at $30^{\circ}C$ after inoculated with panicles of infected rice plants from experimental field plots. In non-SCS treatment, pinkish colonies were formed on the grain surface of panicle of infected plants, and mycelium, macro-conidia and micro-conidia were developed actively inside part of infected grain inoculated. While in SCS treatment, micro-conidia and mycelium were not survived and the growth of macro-conidia, mycelia were greatly inhibited and withered. Based on the results, it is concluded that the environmental friendly control of bakanae disease by use of SCS is possible and soluble silicate can be applied as agents for replacement of seed disinfection.

• Asian Journal of Turfgrass Science
• /
• v.18 no.4
• /
• pp.179-191
• /
• 2004

This study was conducted to find out the effect of sodding and seeding time and rate of seed mixtures on the establishment of cool-season turfgrasses by evaluating the turf coverage rates for two years. In fall planting, the required establishment period of full coverage($100\%$) was 1.5 months with a rolled turf sodding(Kentucky bluegrass $100\%$, Kentucky bluegrass $80\%$+perennial ryegrass $20\%$). The $100\%$ turf establishment was achieved in 7 months with Perennial ryegrass $100\%$, and 7.5 months by seeding with Kentucky bluegrass $100\%$(KB 100), Kentucky bluegrass $80\%$+perennial ryegrass $20\%$(KB80+PR20), Kentucky bluegrass $70\%$+perennial ryegrass $30\%$(KB70+PR30). In spring planting, the establishment periods far sod with KB 100 or KB80+PR20 were taken one month. However, in the case of seeding, the establishment periods were 3 months, 3.5 months, 3.5 months and 4 months with PR100, KB80+PR20, KB70+PR30, and KB 100, respectively Comparing the turf establishment vigor between fall and spring planting, the vigor was higher In spring planting than in fall planting in both sodding and . seeding. In the case of spring planting, the most proper time for turf establishment was tested on April, May, and June trials. The effect was significant in establishment vigor. The result showed highest on April planting. On May and June trials, establishment vigors were decreased gradually As the mixture rate of PR increased, ryegrass, establishment vigor was decreased with the rates. These results indicated that perennial ryegrass has relatively less tolerant to summer heat than Kentucky bluegrass. Number of shoots in 95 days after seeding was higher in KB100 by 16,600 per $m^2$ than in PR100 by 12,400 per $m^2$, while the lowest number showed in KB50+PR50 by 3,300 per $m^2$. Those in KB80:PR20, KB70:PR30 were 6,700 and 4,900 per $m^2$, respectively. The ratios of tillers according to mixture rates between Kentucky bluegrass and perennial ryegrass were KB80:PR20=87:13, KB70:PR30=78:22, and KB50:PR50=48:52. According to results in this study, Ideal seeding time might be spring (April) than in fall (September), and proper mixture rate was $80\%$ of Kentucky bluegrass with $20\%$ of perennial ryegrass.

• Membrane Journal
• /
• v.22 no.2
• /
• pp.120-127
• /
• 2012

In this study, separation of ethylbenzene from mixed xylene was performed by using TS-1 zeolite membrane. TS-1 zeolite membranes were prepared by microwave synthesis and changing the reaction temperature. MFI-type TS-1 membranes are synthesized on alumina tubes by functional coating using 3-chloropropyltrimethoxysilane (3CP-TMS). On top surface of interlayer, nano TS-1 crystals were seeded. To form interlayer, microwave-assisted growth of TS-1 zeolite was carried out and thin zeolite layers were produced. All of the prepared membranes are tested to separate ethylbenzene from mixed xylene at different operating temperatures. TS-1 membrane with zeolite seed synthesized at $170^{\circ}C$ compared to 120, $140^{\circ}C$ shows the best ethylbenzene separation at the operation temperature of $200^{\circ}C$ from ternary mixed xylene containing certain composition of ethylbenzene/p-xylene/m-xylene. (separation factor : 2.64, ethylbenzene flux : 1703.0 mol/$m^2{\cdot}s{\cdot}Pa$).