• Title/Summary/Keyword: Seed grain

Search Result 450, Processing Time 0.025 seconds

Electrical Conduction Chracteristics of ZnO Varistor Fabricated by the Method of 3-Composition Seed Grain (3-성분 종입자법으로 제조된 ZnO 바리스터의 전기전도 특성)

  • 김도영;장경욱;유영각;곽두환;이준웅
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1991.10a
    • /
    • pp.40-43
    • /
    • 1991
  • The low-voltage ZnO varistor fabricated by a new method with three-composition seed grain are studied. The knee voltage about 5V$\_$0.5[A/$\textrm{cm}^2$]/ for sample #7 among the various samples are observed, and activation energy in the obmic region and trap level in the double sohottky region for each samples are 0.359∼0.450eV and 0.553∼0.620eV, respectively. It is concluded that the change of knee voltage may be caused by trap level in double sohottky region rather than activation energy in the ohmic region.

Conduction Mechanism Analysis of Low Voltage ZnO Varistor

  • Jang, Kyung-Uk;Kim, Myung-Ho;Lee, Joon-Ung
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1998.11a
    • /
    • pp.263-266
    • /
    • 1998
  • ZnO varistors have an excellent non-linearity and a large surge-energy absorption capability. For these reasons, the ZnO varistors are widely used to protect electrical/electronic circuits from an abnormal surge and/or noise signal. In order to obtain the low-voltage varistor with randomly distributed large seed grain within bulk, the ZnO varistors are made by a new three-composition seed grain method. And a conduction mechanism of varistors, which was observed in the temperature range of 30 ∼ 120$^{\circ}C$ and at the current range of 10$\^$-8/∼10$^2$ A/cm$^2$, was classified by the three regions of different mechanism when the current was increased.

  • PDF

Effects of $SiO_2$ and Seed on Ba-ferrite Synthesized by Molten Salt (용융염법으로 합성한 Ba-ferrite의 $SiO_2$ 및 Seed 첨가 효과)

  • 김영근;이승관;김현식;오영우
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1996.11a
    • /
    • pp.326-329
    • /
    • 1996
  • In order to synthesize Ba-ferrite fine particles by molten salt method and inhibit the abnormal grain growth of sintered specimen, KCI anti NaCl were added to basic composition to 50% by weight, and added 1 male% of $SiO_2$ to control the shape of Ba-ferrite particles. $H_{c}$ and $M_{r}$ were decreased when F $e^{3+}$ was substituted with $Co_{2+}$ and $Ti_{4+}$ from x=0 to x=1.0 in $BaFe_{12-2x}$ $Ti_{x}$ $Co_{x}$ $O_{19}$ , and 1 mole% $SiO_2$ increased the size but shortened c-axis of hexagonal ferrite. Seeds added in Ba-ferrite particle effected inhibition of abnormal grain growth during sintering.ing.g.

  • PDF

Optimum Operating Conditions of a Vacuum Nozzle Seeder (진공노즐식 파종기의 최적 작동조건)

  • 민영봉;김성태;정태상
    • Journal of Biosystems Engineering
    • /
    • v.25 no.6
    • /
    • pp.463-470
    • /
    • 2000
  • For maximum seeding efficiency of a nozzle type seeder, the performance of the nozzle should be considered sufficiently. This study was carried out to investigate the optimum operating conditions of a seeder attached the vacuum nozzle which was modified syringe needle acting on the plug seedling tray and the seed plate. Such operating factors as the hole diameter of the nozzle (d), the distance from the nozzle tip to the bottom plate of seed hopper(D) the absorbing air pressure of the nozzle tip(P) the bounding height of seed from the vibrated bottom plate of seed hopper and the seeding speed were selected based on the weight of a grain of seed(W). The treated materials were pepper seed as the flat type, cucumber seed as the oval type and radish seed as the spherical type. The optimum operating conditions of the experimental seeder were revealed as follows: 1. The height of the seed bounding from the bottom plate of seed hopper and the distance from nozzle tip to bounded seed were 5 mm and 0.5 mm at all seeds. The hole diameter of the nozzle and the absorbing pressure for pepper seed, cucumber seed and radish seed was 0.45 mm, 0.65 mm. 0.65mm and 39.2 kPa, 88.3 kPa, 58.8 kPa, respectively. 2. The absorbing pressure P was represented as P=η.4W/$\pi$d$^2$ where η was 100. The seeding speed using a 128 cell tray was 2.4 cm/s which was same transfer as 2.5 trays per minute. 3. The maximum seeding rate in case of the pepper seed was 97% the cucumber seed was 95% and the radish seed was 100% under the optimum operating conditions of the seeder.

  • PDF

Large grain을 가지는 LTPS TFT의 Gate bias stress에 따른 소자의 특성 변화 분석

  • Yu, Gyeong-Yeol;Lee, Won-Baek;Jeong, U-Won;Park, Seung-Man;Lee, Jun-Sin
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.429-429
    • /
    • 2010
  • TFT 제조 방법 중 LTPS (Low Temperature Polycrystalline Silicon)는 저온과 저비용 등의 이점으로 인하여 flat panel display 제작에 널리 사용된다. 이동도와 전류 점멸비 등에서 이점을 가지는 ELA(Excimer Laser Annealing)가 널리 사용되고 있지만, 이 방법은 uniformity 등의 문제점을 가지고 있다. 이를 극복하기 위한 방법으로 MICC(Metal Induced Capping Crystallization)이 사용되고 있다. 이 방법은 $SiN_x$, $SiO_2$, SiON등의 capping layer를 diffusion barrier로 위치시키고, Ni 등의 금속을 capping layer에 도핑 한 뒤, 다시 한번 열처리를 통하여 a-Si에 Ni을 확산시키킨다. a-Si 층에 도달한 Ni들이 seed로 작용하여 Grain size가 매우 큰 film을 제작할 수 있다. 채널의 grain size가 클 경우 grain boundary에 의한 캐리어 scattering을 줄일 수 있기 때문에 MIC 방법을 사용하였음에도 ELA에 버금가는 소자의 성능과 안정성을 얻을 수있었다. 본 연구에서는 large grain TFT의 Gate bias stress에 따른 소자의 안정성 측정 및 분석에 목표를 두었다.

  • PDF

Effect of Large $\alpha$-Silicon Carbide Seed Grains on Microstructure and Fracture Toughness of Pressureless-Sintered $\alpha$-Silicon Carbide

  • Young-Wook Kim;Kyeong Sik Cho;June-Gunn Lee
    • The Korean Journal of Ceramics
    • /
    • v.2 no.1
    • /
    • pp.39-42
    • /
    • 1996
  • ${\alpha}-SiC$ powder with or without the addition of 0.1 wt% of large ${\alpha}-SiC$ partices(seeds) was pressureless-sintered at $1950^{\circ}C$ for 0.5, 2, and 4 h using $Y_3Al_5 O_{12}$ (yttrium aluminum garnet, YAG) as a sintering aid. The materials without seeds had an equiaxed grain struture. In contrast, the materials with seeds sintered for 2 and 4 h had a duplex microstructure with large elongated grains and amall equiaxed grains. Addition of large ${\alpha}-SiC$ seeds into ${\alpha}-SiC$ accelerated the grain growth of some ${\alpha}-SiC$ grains during sintering and resulted in the increased fracture toughness of the sintered materials. The fracture toughnesses of materials with or without seeds sintered for 4 h were 6.6 and $5.2 MPa \;m^{12}$, respectively.

  • PDF

Occurrence of Volunteer Rice Plants at Paddy Field Harvested with Combine (콤바인 수확답에서 벼 이형주 발생양상)

  • 이승필;김상경;윤영석;이광석;최대웅
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.36 no.4
    • /
    • pp.305-309
    • /
    • 1991
  • This experiment was conducted to investigate the effect of shattered grain by combine harvesting at the previous year on rice plant emergence at different planting methods and plant characteristics, The results are follows : Combine harvesting greatly influence on shattered grain of Samgangbyeo as Tongil variety (49.5kg/10a) compared to that of Nagdongbyeo as Japonica variety(27.8kg/10a), while Nagdong-byeo showed higher germination rate than Samgangbyeo, whether transplanted and direct seeded. Emergence of volunteer and seed mixture were lower in transplanted than in direct seeded. In variety test. Japonica variety showed higher emergence of volunteer rice and seed mixture than Tongil variety. Generally, no significant difference in yield components were observed with different varieties by the volunteer rice. But the volunteer rice caused by combine harvesting decreased culm length, panicle length, spikelet number, panicle number and ripening ratio. except l000-grain weights.

  • PDF

Effect of Seeding Date on Growth and Grain Yield of Perilla in Middle Area of Korea (중부지방에서의 파종시기가 들깨의 생육 및 수량에 미치는 영향)

  • 김인재;김민자;남상영;이철희;김홍식
    • Korean Journal of Plant Resources
    • /
    • v.15 no.1
    • /
    • pp.62-66
    • /
    • 2002
  • To investigate the critical seeding date for Daeyeupdlkkae in the middle area of Korea, we seeded from 30 April to 20 July with 20-day intervals on the experimental field in Chungbuk-Do agricultural research and extension service. As seeding date was delayed, days to emergence were shortened, flowering and maturing date were delayed, but maturing period was not significantly affected by seeding date. Delayed seed date resulted in decreased stem length, culm diameter, number of branches per plant and number of nodes on the main stem. Cluster length and 1,000 grain weight increased but number of cluster per plant and number of seed capsules per cluster decreased with delayed seeding. Seeding date up to 10 June showed no effected on grain yield, but 30 June and 20 July decreased 10% and 38%, respectively.

Degradation Mechanism of the ZnO-Varistor Fabricated with the content of a 3-Composition Seed grain (3-성분 종입자법으로 제조된 ZnO-Varistor의 열화기구)

  • 장경욱;박춘배;이준웅
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1992.05a
    • /
    • pp.97-100
    • /
    • 1992
  • The Degradation mechanism of the ZnO-varistor fabricated with the content of a 3-Composition seed grain is discussed using the method of Thermally Stimulated Current (TSC). The spectra of TSC is measured in the temperature range of -130~270$^{\circ}C$ with a various forming electric fields E$\sub$f/, temperature T$\sub$f/ time tf, and a various rising rate of temperature. It is observed that there are appeared the peaks of ${\alpha}$, ${\alpha}$$_2$, ${\beta}$ and ${\gamma}$from high temperature in a TSC spectrum. It seems that ${\alpha}$$_1$ peak is due to thermal depolarization of donor ions forming the space charge in the depletion layer, and ${\alpha}$$_2$peak is due to the detrapping of trapped electrons in deep trap level of intergranular layer, and ${\beta}$ peak is due to the thermal exciting of carrier existing in the donor level of grain itself, and ${\gamma}$ peak is due to the thermal exciting of trapped carrier in all shallow trap site randomly distributed in the inner of sample and/or a intrinsic impurity existing in it.

  • PDF

Agronomic Characteristics of Sunflower (Helianthus annuus L.) Collections (해바라기 수집종의 작물학적 특성)

  • Kim, In-Jae;Nam, Sang-Young;Lee, Yun-Ho;Kim, Seong-Jin;Choi, Seong-Yel;Rho, Chang-Woo;Lee, Jung-Gwan;Song, In-Gyu;Kim, Hong-Sig
    • Korean Journal of Plant Resources
    • /
    • v.23 no.1
    • /
    • pp.1-6
    • /
    • 2010
  • To evaluate agronomic characteristics for the use of biodiesel crop, 328 collections of sunflower (Helianthus annus L.) were obtained from Genebank in Rural Development Adminstration (RDA). The necessary days from seeding to emergence of collections were from 7 to 12 days, and the days to flowering were widely distributed from 55 to 86 days. Stem length ranged from 131 to 345 cm with a mean of 259 cm, and the mean maturing days were 35 days. The number of head flower was 1~23 ea per plant, and the mean size of head flower was 17.6 cm with a range from 14.7 to 21.3 cm (72.8%). The mean seed number per head flower was 1,430 ea, and the weight of seed per plant ranged from 23 to 379 g with a mean of 91.4 g. The mean seed length was 11.7 mm with a range from 9.0 to 21.5 mm, and the mean diameter was 6.4 mm. The mean weight of seed per litter, 1000 grain weight and seed weight per plant were 322.5 g, 63.3 g and 204 g, respectively. Variation of number of head per plant was largest and weight of grain per plant was large in next among growth and grain characteristics. At the results of correlation analysis among characteristics, the seed diameter was getting bigger and the days for flowering dates were prolonged in the higher stem length plant, but the days to maturing and growth duration was shortened.