• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.322-327
• /
• 2008

In this study, a multi-layered pellet was composed of a seed layer including a water-swellable agent and a drug layer containing doxazosin as a model drug, a porous membrane and a castor oil layer to control drug release. The pellet is prepared by a fluidized bed coating method. To confirm drug release from polymer blending in multi-layered pellet system, it is prepared by containing different ratio such as hydroxypropylmethylcellulose (HPMC) : ethyl cellulose (EC) in drug layer and cellulose acetate(CA) : Eudragit RS in membrane. Also, to confirm the effect of oil in drug release, castor oil is coated. As a result, we observed regularly spherical pellet with diameter of $1500{\mu}m$. Release pattern of drug is confirmed by dissolution tester in aqueous media. The more the ratio of EC in drug layer, CA in membrane, and castor oil layer in pellet, the less the drug release is observed. Formation and the amount of pores in membrane is observed by SEM.

• Korean Journal of Materials Research
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2009

Electrolessly deposited Co (Re,P) was investigated as a possible capping layer for Cu wires. 50 nm Co (Re,P) films were deposited on Cu/Ti-coated silicon wafers which acted as a catalytic seed and an adhesion layer, respectively. To obtain the optimized bath composition, electroless deposition was studied through an electrochemical approach via a linear sweep voltammetry analysis. The results of using this method showed that the best deposition conditions were a $CoSO_4$ concentration of 0.082 mol/l, a solution pH of 9, a $KReO_4$ concentration of 0.0003 mol/l and sodium hypophosphite concentration of 0.1 mol/L at $80^{\circ}C$. The thermal stability of the Co (Re,P) layer as a barrier preventing Cu was evaluated using Auger electron spectroscopy and a Scanning calorimeter. The measurement results showed that Re impurities stabilized the h.c.p. phase up to $550^{\circ}C$ and that the Co (Re,P) film efficiently blocked Cu diffusion under an annealing temperature of $400^{\circ}C$ for 1hr. The good barrier properties that were observed can be explained by the nano-sized grains along with the blocking effect of the impurities at the fast diffusion path of the grain boundaries. The transformation temperature from the amorphous to crystal structure is increased by doping the Re.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.183-184
• /
• 2013

Two main MBE growth techniques have been used: plasma-assisted MBE (PA-MBE), which utilizes a rf plasma to supply active nitrogen, and ammonia MBE, in which nitrogen is supplied by pyrolysis of NH3 on the sample surface during growth. PA-MBE is typically performed under metal-rich growth conditions, which results in the formation of gallium droplets on the sample surface and a narrow range of conditions for optimal growth. In contrast, high-quality GaN films can be grown by ammonia MBE under an excess nitrogen flux, which in principle should result in improved device uniformity due to the elimination of droplets and wider range of stable growth conditions. A drawback of ammonia MBE, on the other hand, is a serious memory effect of NH3 condensed on the cryo-panels and the vicinity of heaters, which ruins the control of critical growth stages, i.e. the native oxide desorption and the surface reconstruction, and the accurate control of V/III ratio, especially in the initial stage of seed layer growth. In this paper, we demonstrate that the reliable and reproducible growth of GaN on Si (110) substrates is successfully achieved by combining two MBE growth technologies using rf plasma and ammonia and setting a proper growth protocol. Samples were grown in a MBE system equipped with both a nitrogen rf plasma source (SVT) and an ammonia source. The ammonia gas purity was ＞99.9999% and further purified by using a getter filter. The custom-made injector designed to focus the ammonia flux onto the substrate was used for the gas delivery, while aluminum and gallium were provided via conventional effusion cells. The growth sequence to minimize the residual ammonia and subsequent memory effects is the following: (1) Native oxides are desorbed at $750^{\circ}C$ (Fig. (a) for [$1^-10$] and [001] azimuth) (2) 40 nm thick AlN is first grown using nitrogen rf plasma source at $900^{\circ}C$ nder the optimized condition to maintain the layer by layer growth of AlN buffer layer and slightly Al-rich condition. (Fig. (b)) (3) After switching to ammonia source, GaN growth is initiated with different V/III ratio and temperature conditions. A streaky RHEED pattern with an appearance of a weak ($2{\times}2$) reconstruction characteristic of Ga-polarity is observed all along the growth of subsequent GaN layer under optimized conditions. (Fig. (c)) The structural properties as well as dislocation densities as a function of growth conditions have been investigated using symmetrical and asymmetrical x-ray rocking curves. The electrical characteristics as a function of buffer and GaN layer growth conditions as well as the growth sequence will be also discussed. Figure: (a) RHEED pattern after oxide desorption (b) after 40 nm thick AlN growth using nitrogen rf plasma source and (c) after 600 nm thick GaN growth using ammonia source for (upper) [110] and (lower) [001] azimuth.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.11-18
• /
• 2005

The nicotine converter genotypes of burley tobacco (Nicotiana tabacum L.), which convert nicotine to nornicotine, contain a high amount of nornicotine that degrades tobacco quality and smoking taste. Elimination of nicotine converter plants before seed harvesting is required for breeding nicotine low-converter lines and for increasing their seed production. This study aims to develop a rapid and convenient method of identifying nicotine converter plants of burley breeding lines of KB9118(KB108) using thin-layer chromatography (TLC) and isatin coloration method. Out of 223 plants in 10 lines harvested at maturity in 2002, 102 plants ($45\%$) were identified as nicotine converters by TLC of tobacco leaves air-cured. For 16 lines selected as low-converters in 2002, 148 plants grown in the field in 2003 were tested by the isatin coloration method using two detached leaves at the flowering stage thoroughly sprayed with $1\%\;NaHCO_3$ solution and cured in conditioned chambers for the early identification of nicotine to nornicotine conversion. From these samples, 46 plants ($31\%$) in 4 lines were identified as nicotine converters, indicating that the ratio of converters significantly decreased by one time selection. Mean percent conversion of non-screened lines was $14\%$ higher than that of following generation. Therefore in the burley tobacco, a rapid and convenient means of identifying and removing nornicotine converter plants by the isatin coloration method during growth in the greenhouse or field were effective in reducing the converter plants in the following generation.

• Korean Journal Plant Pathology
• /
• v.2 no.3
• /
• pp.185-192
• /
• 1986

Upon germination, a conidium was septated in accordance with number of germ tubes. The percentages of ppressorial formation were not different between the resistant cultivars (Kumchang NO. 2 and Hongilpum) and the susceptible cultivars (Haneulcho and Saegochu). Appressorial form was various such as round, elliptic or star-shapped. The maximum number of appressoria was shown at 12 hours after inoculation. By 24 hours fter inoculation, hypersensitive tiny brown lesions were observed on the leaves and fruits of the resistant cultivars. Epidermal cells under cuticle layer of the resistant Kumchang NO. 2 fruit showed severe plasmolysis, while on the susceptible cultivars, the lession was largely extended to following incubation. Subcuticular infection hyphae were profusely colonized in the disintegrated tissues. Acervuli and setae on the stromatic structure ere formed at 96 hours. The infected seed coat was not only severely collapsed, but also infection hyphae were observed on the disintegrated seed coat, resulting severe plasmolysis of nucellus and embryo.

• Mycobiology
• /
• v.46 no.3
• /
• pp.283-286
• /
• 2018

Fusarium graminearum causes the devastating plant disease Fusarium head blight and produces mycotoxins on small cultivated grains. To investigate the timeframe of F. graminearum infection during rice cultivation, a spore suspension of F. graminearum was applied to the rice cultivars Dongjin 1 and Nampyeongbyeo before and after the heading stage. The disease incidence rate was the highest (50%) directly after heading, when the greatest number of flowers were present, while only 10% of the rice infected 30 days after heading showed symptoms. To understand the mechanism of infection, an F. graminearum strain expressing green fluorescent protein (GFP) was inoculated, and the resulting infections were visually examined. Spores were found in all areas between the glume and inner seed, with the largest amount of GFP detected in the aleurone layer. When the inner part of the rice seed was infected, the pathogen was mainly observed in the embryo. These results suggest that F. graminearum migrates from the anthers to the ovaries and into the seeds during the flowering stage of rice. This study will contribute to uncovering the infection process of this pathogen in rice.

• Korean Journal of Pharmacognosy
• /
• v.36 no.3 s.142
• /
• pp.240-244
• /
• 2005

The methanol extract of the seed of Myristica fragrans (myristicaceae) demonstrated a potent inhibition on the proliferation of cultured human tumor cells such as A549 (non small cell lung), SK-OV-3 (ovary), SK-MEL-2(melanoma), XF498 (central nerve system) and HCT-15(colon). The MeOH extract was fractionated into three portions by serial solvent partition i,e., EtOAc soluble part, BuOH soluble part and remaining water layer. Among them, the EtOAc soluble part of the extract demonstrated a potent inhibition on the proliferation of cultured human tumor cells, Bioassay-guided fractionation of the EtOAc soluble part led to the isolation of six lignan constituents, i.e., safrole(1), machilin A (2), licarin B (3), macelignan (4), mesodihydroguaiaretic acid (5) and myristargenol A (6) as well as a large amount of myristic acid as active ingredients. Structures of the isolated active components (1-6) were established by chemical and spectroscopic means.

• Journal of Plant Biology
• /
• v.20 no.3
• /
• pp.127-134
• /
• 1977

In order to investigate the changes of free amino acids during the differentiation and development of young spike in naked barley, a typical spring grain, Wanju, and two winter grains, Sedohadaka and Nonsankwa No. 1-6 differing in their spring habits, were analyzed at different growth stages by thin layer chromatography. In all the varieties 22 ninhydrin positive components were detected at the sowing time of March 5 and 20 components in the sowing plots of March 30. In case of the latter plot, β-alanine was identified only in both Wanju and Sedohadaka, whereas pipecolic acid was detected only in Nonsankwa No. 1-6. Particularly, it is interesting that β-alanine was observed only in the case showing the normal heading independent of the varieties and sowing times. Whether these components are directly related to the physiology of spring habits in barley or not is also a question to be answered. Of the major amino acids, alanine and γ-aminobutyric acid were always detected in appreciably large spots, and serine, leucine, aspartic acid, valine and asparagine were somewhat larger. In the plot of march 30, glutamic acid was also detected in very large spot in both Wanju and Sedohadaka at the stage of spikelet differentiation and in Nonsankwa No. 1-6 at the stage of bract differentiation. Histidine, which showed the only qualitative difference among the varieties during seed germination, cannot be observed at all. Proline observed considerably large spot during seed germination was always detected but very small except that it was observed in large spot at the stage of floret differentiation in Nonsankwa No. 1-6 in the plot of March 5.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.39-46
• /
• 2019

The liquefaction is a phenomenon that the effective stress becomes zero due to the rapidly accumulated excess pore water pressure when a strong load acts on the ground for a short period of time, such as an earthquake or pile driving, resulting in the loss of the shear strength of the ground. Since the Geongju and Pohang earthquake, liquefaction brought increasing domestic attention. This liquefaction can be assessed mainly through the semi-empirical procedures proposed by Seed and Idriss (1982) and the liquefaction risk based on the penetration resistance obtained from borehole DB and SPT. However, the geotechnical information data obtained by the in-situ tests or boring information fundamentally have an issue of the representative of the target area. Therefore, this study sought to construct a ground information database by classifying and reviewing the ground information required for liquefaction assessment, and tried to solve the representative problem of the soil layer that is subject to liquefaction evaluation by performing spatial interpolation using GIS.

• Animal Bioscience
• /
• v.35 no.2
• /
• pp.236-246
• /
• 2022

Objective: The objective of this study was to investigate the effect of dietary pumpkin (Cucurbita moschata) seed meal (PSM) on laying hens' performance, quality, fatty acids, cholesterol, antioxidant compounds and shelf life of eggs. Methods: Eighty Tetra SL laying hens, 50-week-old, were randomly divided into two equal groups, having 10 replicates with 4 birds in each. The control (CON) treatment was fed with basal diet, while experimental treatment was fed a diet with 9% PSM, for a 6 week period. Results: Dietary PSM significantly decreased average daily feed intake (p<0.05), with no significant effect on other performance parameters. The PSM, enriched the eggs with polyunsaturated fatty acids, especially α linolenic acid (0.33 vs 0.21 g/100 g) and linoleic acid (20.65 vs 18.37 g/100 g), whereas it reduced the amount of arachidonic acid with 3.91% and n-6/n-3 ratio in PSM eggs compared with CON. The inclusion of 9% PSM significantly (p<0.05) diminished the cholesterol concentration in yolk with 11.31% and in egg with 10.38%, in respect to the CON samples. The significantly (p<0.05) higher concentration of polyphenols and antioxidant compounds, determined in PSM eggs, proved to be effective on shelf life of eggs preserved at refrigerator (5℃) and room temperature (21℃) for 28 days, by delaying the lipid oxidation and protein denaturation. This effect was reflected in significantly (p<0.05) higher Haugh unit in eggs stored 28 days at 21℃ and lower albumen pH values for the overall storage time, both at 5℃ and 21℃, proving the antioxidant effect of pumpkin. Conclusion: Dietary PSM supplementation was significantly effective on average daily feed intake and egg quality by increasing some fatty acids while lowering the cholesterol concentration. Also, PSM proved to be effective improving shelf life of eggs for 28 days storage time.