• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1996년도 학술발표회 논문집
• /
• pp.689-694
• /
• 1996

새만금지구의 조류 변화와 만경강, 동진강의 부유사유입의한 퇴적 과정을 알아보았다. 퇴적과정은 새만금지구해역의 조석잔차류와 수온, 염분에 의한 잔차류, 바람에 의한 잔차류성분을 포함한 흐름 성분과 입자의 침강속도를 고려한 3차원 수치실험에 의하여 재현하였다. 계산에서 안정성이 높고, 오차가 축적되지 않고, 복잡한 경계조건에서도 적용이 간단하다는 특성이 있는 Monte Carlo 방법을 사용하여 부유사의 분산, 퇴적과정을 수치실험한 결과와 농어촌진흥공사의 관측결과와 거의 유사하였다.

• 대한환경공학회지
• /
• 제39권5호
• /
• pp.229-236
• /
• 2017

국내에서 설치 운영 중인 D정수장의 장방형 침전지를 대상으로 설계유량($15,864m^3/day$)과 운영유량($33,333m^3/day$))에 대하여 CFD 해석 방법을 사용하여 침전지의 유동특성 및 tracer 모의를 수행하였으며, 침전지의 유입부로 유입되는 플럭을 입자로 가정하여 모사하는 Lagrangin 기법을 적용하여 침전지의 효율을 검토하였다. 그 결과 침전지내 흐름을 plug flow 영역으로 만들기 위한 평균 속도값을 0.00193 m/s, 0.00417 m/s로 도출되었다. 또한 각 유량 조건에 대해 Tracer test를 모의한 결과 ${\beta}$(유효접촉인자) 값은 각각 0.51, 0.46, Morrill Index값은 각각 6.05와 3.21, 단락류 Index는 0.54와 0.34로 나타났다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.342-349
• /
• 2018

Polystyrene (PS) was coated on carbonyl iron (CI) particles via dispersion polymerization to produce core-shell structured CI/PS particles and adopted as magnetorheological (MR) material. Two MR fluids were prepared by dispersing CI/PS and CI particles in silicone oil. Their MR and tribological properties were investigated using a rheometer and a reciprocating friction and wear tester, respectively. Experimental data showed that tribological properties of MR fluid based on CI/PS particles are significantly enhanced compared to those of CI based MR fluid. Sedimentation problem of CI/PS MR fluid was also expected to be improved due to relatively lower density of CI/PS particles.

• ALGAE
• /
• 제27권2호
• /
• pp.115-123
• /
• 2012

The establishment of algal spores plays an essential role in adult kelp distribution and abundance patterns. Sedimentation is a key variable regulating algal spore settlement and success, possibly controlling species-specific dominance $in$ $situ$. Laboratory experiments were used to determine spore attachment and survival rates of two Alaskan canopy-forming kelps, $Nereocystis$ $luetkeana$ (K. Mertens) Postels & Ruprecht and $Eualaria$ $fistulosa$ (Postels & Ruprecht) M. J. Wynne, to various types of sediment loading. Spore attachment for both species was significantly and similarly affected by three sediment treatments: suspended particles; settled sediment covering the substratum; and smothering of attached spores by settling sediment. Spore attachment decreased by approximately 90% at 420 mg sediment $L^{-1}$, the highest sediment load tested here, under all three treatments for both species. These results suggest that increases in sedimentation may constrain the success of the spore stages, but sediment does not seem to be a likely factor explaining species-specific distribution patterns. However, while sedimentation affected spores of both species similarly, timing of spore release in relation to times of maximum sediment load in the water might differ for different species, possibly explaining kelp species distribution patterns.

• Geomechanics and Engineering
• /
• 제33권2호
• /
• pp.121-131
• /
• 2023

Clay sedimentation has been widely analyzed for its application in a variety of geotechnical constructions such as mine tailing, artificial islands, dredging, and reclamation. Chemical flocculants such as aluminum sulfate (Al₂(SO₄)₃), ferric chloride (FeCl₃), and ferric sulfate (Fe(SO₄)₃), have been adopted to accelerate the settling behaviors of clays. As an alternative clay flocculant with natural origin, this study investigated the settling of xanthan gum-treated kaolinite suspension in deionized water. The sedimentation of kaolinite in solutions of xanthan gum biopolymer (0%, 0.1%, 0.5%, 1.0%, and 2.0% in a clay mass) was measured until the sediment height was stabilized. Kaolinite was aggregated by xanthan gum via a direct electrical interaction between the negatively charged xanthan gum molecules and positively charged edge surface and via hydrogen bonding with kaolinite particles. The results revealed that the xanthan gum initially bound kaolinite aggregates, thereby forming larger floc sizes. Owing to their greater floc size, the aggregated kaolinite flocs induced by xanthan gum settled faster than the untreated kaolinite. Additionally, X-ray computed tomography images collected at various depths from the bottom demonstrated that the xanthan gum-induced aggregation resulted in denser sediment deposition. The findings of this study could inspire further efforts to accelerate the settling of kaolinite clays by adding xanthan gum.

• 한국대기환경학회지
• /
• 제19권5호
• /
• pp.551-560
• /
• 2003

Particle deposition in human lungs was investigated theoretically by using asymmetric five-lobe lung model. The volumes of each of the five lobes were different, thereby forming an asymmetric lung structure. The tidal volume and flow rate of each lobe were scaled according to lobar volume. The total and regional deposition with various breathing patterns were calculated by means of tracking volume segments and accounting for particle loss during inhalation and exhalation. The deposition fractions were obtained for each airway generation and lung lobe, and dominant deposition mechanisms were investigated for different size particles. Results show that the tidal volume and flow rate have a characteristic influence on particle deposition. The total deposition fraction increases with an increase in tidal volume for all particle sizes. However, flow rate has dichotomous effects: a higher flow rate results in a sharp increase in deposition for large size particles, but decreases deposition for small size particles. Deposition distribution within the lung shifts proximally with higher flow rate whereas deposition peak shifts to the deeper lung region with larger tidal volume. Deposition fraction in each lobe was proportional to its volume. Among the three main deposition mechanisms, diffusion was dominant for particles < 0.5 ${\mu}{\textrm}{m}$ whereas sedimentation and impaction were most influential for larger size particles. Impaction was particularly dominant for particles> 8 ${\mu}{\textrm}{m}$. The results may prove to be useful for estimating deposition dose of inhaled pollutant particles at various breathing conditions.

• 한국광물학회지
• /
• 제30권4호
• /
• pp.137-147
• /
• 2017

본 연구에서는 저품위 견운모를 대상으로 파쇄, 해쇄 및 침강분리 공정을 적용하여 각각의 단위공정의 특성과 품위향상에 미치는 영향에 대해 고찰하였다. 원광석의 주 구성광물은 견운모, 석영, 방해석이었으며, 체가름 결과, 입자의 크기가 작아질수록 견운모의 함량은 높아지는 반면, 불순광물의 함량은 상대적으로 감소하는 경향을 보였다. 조암광물의 형상 및 원소분석 결과, 메디아를 이용하는 분쇄 방식보다는 입자의 표면에 선택적으로 충격력과 전단력을 가해줄 수 있는 해쇄 방식이 적절한 것으로 판단되었다. 해쇄 시간 및 슬러리 농도가 증가함에 따라 미립자 발생량이 증가하였으며, 장시간 해쇄한 경우 미립자 내 불순광물인 석영과 방해석의 혼입량이 증가하는 결과를 보였다. 해쇄 없이 단순하게 분산한 슬러리를 20분 동안 정치 후 회수한 정광의 생산율은 15.4 wt%, $K_2O$ 함량은 9.84 wt% 였다. 10분 해쇄한 후 40분 침강 분리하여 회수한 정광의 생산율은 23.4 wt%로 증가한 반면 $K_2O$ 함량은 9.71 wt%로 감소하였다. 회수된 최종산물은 대부분 판상의 입자로 관찰되었으며 입자표면의 원소분석 결과, 주 구성 원소는 Si, Al, K로 견운모의 화학조성을 보였다.

• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.323-330
• /
• 2006

As the interest in environmental pollution resulting from recent industrial development is converging, wastewater treatment problem of dying processing is one of important pending issue. Usually, flow mediation earth and settling pond etc. of processing plant to handle water or wastewater. Mediation is the wastewater that flowed past settling pond than material of heavy particles, water weight colloid particles that big solids are removed but are suspensibility material settlement exclusion impossible. So, we need flocculation and coagulation action to remove materials from this colloid state. For flocculation and coagulation action chemical agents to add back, addition of chemical agents forms floc of could settle size. That is, shorten the sedimentation time and quality of processing water because promoting sedimentation doing to do fines or suspended solids and colloid can materials large size and also, flocculation to annex efficiency of filtration augment. Therefore, I executed this research to prove that improving organic matter and chromaticity of treated water of processing epochally using organic coagulant informed positive ion co-polymerization superior in color wastewater through this research.

• 한국산업융합학회 논문집
• /
• 제11권3호
• /
• pp.107-111
• /
• 2008

Usually, flow mediation earth and settling pond etc. of processing plant to handle water or wastewater. Mediation is the wastewater that flowed past settling pond than material of heavy particles, water weight colloid particles that big solids are removed but are suspensibility material settlement exclusion impossible. So, we need flocculation and coagulation action to remove materials from this colloid state. Flocculation and coagulation by addition of chemical agents forms floc settle size. That is, shorten the sedimentation time and quality of processing water because promoting sedimentation doing to do fines or suspended solids and colloid can materials large size and also, flocculation to annex efficiency of filtration augment. Therefore, I executed this research to prove that COD efficiency for wastewater by using inorganic coagulant.

• 한국해양학회지:바다
• /
• 제12권4호
• /
• pp.273-279
• /
• 2007

동해 남서부 해역 울릉분지 일대 대륙붕과 대륙사면에서 퇴적속도를 추정하기 위해 저배경방사능 우물형 고순도 게르마늄 감마선 검색기를 이용하여 $^{210}Pb$, $^{226}Ra$와 $^{137}Cs$를 측정하였다. 추정된 퇴적속도는 대륙붕에서 가장 높고 (0.6-1.1 cm/yr), 대륙붕의 정점 B1005로부터 외해로 갈수록 거리가 증가함에 따라 퇴적속도는 지수함수적으로 감소하여, 분지에서 0.2 cm/yr 이하로 계산되었다. $^{137}Cs$의 투과깊이을 이용하여 퇴적속도에 대한 퇴적 후 퇴적물 혼합작용의 영향을 평가한 결과, 정점 BS-1을 제외하고 다른 정점들에 대하여 퇴적속도 추정에서 생물교란의 영향이 미미하다고 판단되어, 추정된 퇴적속도는 이 지역의 퇴적속도를 잘 나타내고 있다고 판단되었다. 기존의 여러 연구들과 이 연구의 결과로부터 대한해협을 통해 공급된 퇴적물들이 한반도 동남해역 연안에 이르러 대륙붕지역에 주로 퇴적되며, 나머지는 한반도 동쪽 대륙사면과 분지에 퇴적되는 것으로 추정할 수 있다. 또한 $^{210}Pb$ 수직분포는 이 지역의 퇴적과정이 매우 복잡할 가능성을 제시한다.