• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.17-29
• /
• 2009

There has been an increase in the investigation of deep sea sediments with a consequent increase in the amount of energy required to undertake these investigations. The geotechnical characteristics of Ulleung Basin sediment are explored by using depressurized specimens following methane production tests carried out on pressured core samples obtained at 2,100 m water depth and 110 m below sea floor. Geotechnical index tests, X-ray diffraction, and scanning electron microscope are conducted to identify the geotechnical index parameters, clay mineralogy, chemical composition, and microstructure of the sediments. Compressibility, and elastic and electromagnetic wave parameters are investigated for two samples by using a multi sensing instrumented oedometer cell. The strength chatracteristics are obtained by the direct shear tests. The dominant clay minerals are mostly kaolinite, illite, chlorite, and calcite. The SEM shows a well-developed flocculated structure of the microfossil. Void ratio, electrical resistivity, real permittivity, conductivity, and shear wave velocity show bi-linear behavior with the effective vertical stress: as the vertical effective stress increases. The friction angle obtained by the direct shear test is about $21^{\circ}$, which is similar to the value observed in the Ulleung Basin sediments. This study shows that the understanding of the behavior acting on the diatomaceous marine sediment is important because it often maintains the useful energy resources such as gas hydrate and so will be the new engineering field in the next generation.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.656-664
• /
• 2010

We investigated the levels and distribution patterns of 16 priority polycyclic aromatic hydrocarbons (PAHs), 12 Coplanar polychlorinated biphenyls (Co-PCBs) and organochlorine pesticides (OCPs) in the surface sediments from the Nakdong river basin, Korea. The levels of 16 PAHs and 12 Co-PCBs in the river sediment samples ranged from not detected (N.D.)~969.3 ng/g-dry, 4.2~7716.5 pg/g-dry (0.0~10.1 pg-TEQ/g-dry), respectively. Also, the levels of 16 PAHs were from 5.8~2987.2 ng/g-dry and 4.3~461.1 pg/g-dry (0.0~0.6 pg-TEQ/g-dry) for 12 Co-PCBs in the lake sediment samples. Only dichloro-diphenyl-trichloroethane (DDT) were detected among target OCPs and the concentration ranged from N.D.~1.5 ng/g-dry in the river sediment samples. These contamination levels were far below the guideline values suggested for environmental quality assessment. Low molecular weight PAHs were dominant in the river sediment samples, while middle and high molecular weight PAHs were dominant among 16 PAHs in the lake sediment samples. PCB-118 and PCB-105 were predominant congeners in the sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PAHs and Co-PCBs contamination in the sediments of the Nakdong river basin was performed. The pyrogenic-PAHs originated from combustion of fossil fuel and biomass were related with the PAHs contribution in most of the sediment samples, and Co-PCBs in the sediment samples were related with commercial PCB products.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.82-98
• /
• 2009

This study applied SWAT model to analyze suspended sediment load that is influence on the high density turbid water in Donghyang and Cheoncheon basin, which are located in the upstream of Yongdam Dam. GIS data such as DEM, land cover map and soil map, and meteorological data were used as the input data of SWAT model. And the rating curve equation and Q-SS equation of Donghyang and Cheoncheon gauge station were applied as the measured values of them. As the result of flowout, the coefficient of determination ($R^2$) and the Nash-Sutcliffe coefficient of efficiency (EI) of model calibration showed high as 0.87 and 0.87 at Donghyang gauge station, and the $R^2$ and EI of model validation were high as 0.95 at Cheoncheon gauge station. Also, as the result of suspended sediment load, the $R^2$ and EI of model calibration were high as 0.77 and 0.76 at Donghyang gauge station, and the $R^2$ and EI of model validation marked high as 0.867 and 0.80 at Cheoncheon gauge station. It is considered that the suspended sediment load of 2003 showed the highest due to rainfall amounts and rainfall intensity in using SWAT model. The results of suspended sediment modeled in this study can be applied to the decision-making support data for the evaluation of soil erosion possibility and turbid water potential in the management of reservoir.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.11-19
• /
• 2014

This study is analyze future climate and land cover change affects behaviors for amount of streamflow and sediment discharge within basin. We used the climate forecast data in RCP 4.5 and 8.5 (2011-2100) which is opposite view for each other among RCP scenarios that are discussed for 5th report for IPCC. Land cover map built based on a social economic storyline in RCP 4.5/8.5 using Logistic Regression model. In this study we set three scenarios: one scenario for climate change only, one for land cover change only, one for Last both climate change and land cover change. It simulated amount of streamflow and sediment discharge and the result showed a very definite change in the seasonal variation both of them. For climate change, spring and winter increased the amount of streamflow while summer and fall decreased them. Sediment showed the same pattern of change steamflow. Land cover change increases the amount of streamflow while it decreases the amount of sediment discharge, which is believed to be caused by increase of impervious Surface due to urbanization. Although land cover change less affects the amount of streamflow than climate change, it may maximize problems related to the amount of streamflow caused by climate change. Therefore, it's required to address potential influence from climate change for effective water resource management and prepare suitable measurement for water resource.

• Water for future
• /
• v.9 no.2
• /
• pp.67-75
• /
• 1976

With 9 existng reservoirs selected in the Sab-Gyo River Basin, the sedimentation of the reservoirs has been calculated by comparing the present capacity with the original value, which revealed its reduced reservoirs capacity. The reservoirs has a total drainage area of 6,792 ha, with a total capacity of 1,204.09 ha-m, and are short of water supply due to reduction of reservoirs capacity. Annual sedimention in the reservcire is relation to the drainage area, the mean of annual rain fall, and the slop of drainage area. The results of obtained from the investigation are summarized as follow; (1) A sediment deposition rate is very high, being about $9.19{m}^3/ha$ of drainage area, and resulting in the average decrease of reservoir capacity by 19.1%. This high rate of deposition could be mainly attributed to the serve denvdation of forests due to disor derly cuttings of tree. (2) An average unit storage of 415.8mm as the time of initial construation is decreesed to 315.59mm at present, as resultting, we could'nt supply water at 566.24ha. (3) A sediment deposition rate as a relation to the capacity of unit drainage area is as follow; $Qs=1.43 (c/a)^{0.531}$ (4) A sediment deposition rate as a relation to the mean of annval rainfall is as follow; $Qs=672.61 p^{0.024}$ (5) A sediment deposition rate as a relation to the mean slop of drainage area is follow; $Qs=267.21 S^{0.597}$

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.903-919
• /
• 2018

This paper focuses on the depositional processes and environmental changes during initial marine flooding recorded in the lower Cambrian succession of the North China Platform in Shandong Province, China. In order to understand imbalance of accommodation and sediment supply in the initial stage of basin-fill, a detailed analysis of sedimentary facies was made for the lowermost siliciclastic deposits of the Liguan Formation. It reveals ten siliciclastic lithofacies in three large-scale outcrops (Jinhe, Anqianzhuang, and Zhangjiapo sections). These facies are grouped into four facies associations, representing siliciclastic foreshoreshoreface (S1), siliciclastic offshore (S2), distributary mouth bars (S3), and coastal plain (S4). The siliciclastic components occur in a linear belt, emanating from a major drainage system in the northeastern part of the platform. Deposition of siliciclastic sediments was largely controlled by regional topography of the unconformable surface and shoreline configuration as well as strong effect of waves and currents. With ensued rise in sea level and decrease in siliciclastic sediment supply, carbonate sediments prevailed, filling the accommodation created by epeirogenic subsidence and sediment loading.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.11a
• /
• pp.33-45
• /
• 2006

The interest of sediment has been increased daily because most of domestic dam reservoir's operation time have been extended and wide basin area is the main characteristics for artificial reservoir which the speed of water flow in artificial reservoir is slower than that of natural reservoir. Therefore a lot of sediment has been significantly accumulated. In this study, the accurate topographic data were obtained using echo-sounding system. GPS survey, low-frequency sub-bottom profiler, and high-frequency echo-sounding system were used to compute the exact amount of sediment. Based on the results, DEM(Digital Elevation Model) and DSM(Digital Surface Model) were generated. The GIS system for the management of sediment was created based on topographic data on the riverbed and this system can be efficiently used for the management of sediment which caused the problems of reservoir capacity and water quality.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.2
• /
• pp.69-79
• /
• 2009

Major and trace elements were analyzed in three core sediments to investigate geochemical characteristics of East Sea sediments and provenance changes during late Quaternary in Ulleung Basin. Comparing with Yellow and South Sea sediments, contents of major elements were generally similar while contents of trace elements were significantly different. Furthermore, within this basin, there were some variabilities in trace element compositions. In the western slope sediments (WS), Mo was enriched over 6 times as much as other sites. On the other hand, Zr, Nb, Hf and Ta were enriched in basin sediments (Basin), and Ca and Cs were enriched in southern slope sediments (SS). After excluding elements derived from biogenic, authigenic and diagenetic origins, the lithogenic elements (K, Ti, Cs, Zr, Nb, Hf and Ta) could be classified into three groups from the comparison of element/Al ratios among cores. The first group consisted of elements (K and Ti) that showed the nearly similar element/Al ratios among three cores. The second group contained Cs which showed significant difference between two slope sediments. The third group elements (Zr, Nb, Hf and Ta) showed highly enriched in basin relative to both slope areas. The depth profiles of metal/Al ratios in basin sediments provided the following interpretation for the compositions of sediment and their variation. From 10,000 yr B.P. to 7,000 yr B.P. two lithogenic components (volcanic ashes and western slope sediments) were mixed and deposited in the basin. After 7,000 yr B.P., however, southern slope sediments were mixed with volcanic ashes and deposited in basin area. This event of source change is nearly close to inflow period of the Tsushima Warm Current to Ulleung Basin. Thus, it might be suggested that element geochemistry in Ulleung basin sediment indicate the change of current system in the study area.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.156-168
• /
• 2013

Drilling expedition #1 in 2007 and drilling expedition #2 in 2010 were performed for gas hydrate resources evaluation and optimal site selection of pilot test in Ulleung basin, East Sea, Korea. This study presents to build the 3D spatial distribution models using the estimated sedimentary facies, porosity, and gas hydrate saturation derived by well logs and core analysis data from UBGH1-4, UBGH1-9, UBGH1-10, UBGH1-14, UBGH2-2-1, UBGH2-2-2, UBGH2-6, UBGH2-9, UBGH2-10 and UBGH2-11. The objective of 3D spatial distribution modeling is to build a geological representation of the gas hydrate-bearing sediment that honors the heterogeneity in 3D grid scale. The facies modeling is populating sedimentary facies into a geological grid using sequential indicator simulation. The porosity and gas hydrate saturation modeling used sequential Gaussian simulation to populate properties stochastically into grid cells.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.115-127
• /
• 2009

Mineral quantification was performed on sediments of the Ulleung basin by X-ray powder diffraction and the computer software based on Rietveld quantification method. The sediments are dominated by amorphous opal-A with quartz, feldspars, micas, clays, calcite, and pyrite. The opal-A shows iterative variation in abundance with increasing burial depth. In addition, the relative abundance of opal-A is coincident with abundance of organic carbon contents, indicating that the Ulleung sediment consists mostly of amorphous silica derived from organism in the pelagic environment. Upward increase in the abundance of opal-A is markedly shown in the cores located in the slope region. On the other hand, there is a distinct tendency that the abundance of calcite is inversely proportional to that of opal-A. This indicates that the abundance of opal-A increases during the rise of sea level. Also, the fall of sea level lowers the abundance of opal-A.