• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1742-1749
• /
• 2011

The 3 way segmented Maglev switch is developed for the urban Maglev vehicle, which is scheduled to debut at the middle of 2013 in Incheon International Airport. The 3 way switch is composed of 3 moving girders, 4 fixed girders, driving units, moving units, clamping units and articulated angle relieving equipment etc. In this paper, the measured results on the interaction between vehicle and switch are discussed. The measured results are following; First, continuous moving test and natural frequency for girder and levitation rail. Second, levitation and lateral air gap of the bogies running on the curved switch. Third, noise of moving mechanical parts of the 3 way segmented switch. Forth, thermal displacement of the girder due to temperature change. With over the measured results, more reliability and stability of the 3 way segmented switch are secured.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1440-1444
• /
• 2011

Memory-device is one of the auxiliary components of point-switch machine; connecting front-rod and tongue-rail. The right side and left side of memory-device are different from each other. When there would be a derailing accident of rolling stock or motor-car, the memory-device properly bends and protects the internal of point-switch machine. Memory-device is one of the important site maintenance spare parts. Memory-device for each of right and left side should be secured so that they can be installed on correct side during an exchange work. This study suggests the development of memory-device with different left and right side and the performance test of it. The study intends to contribute in the convenience improvement of maintenance by improving the unification of memory-device.

• 한국정보통신학회논문지
• /
• 제19권6호
• /
• pp.1443-1448
• /
• 2015

현재 대부분의 지하공동구 출입관리시스템은 중앙시스템과 자동개폐기 간 네트워크가 유선 상으로 구축되어 있으며, 네트워크 인프라의 부재 그리고 리더기의 야외 노출 등 지하공동구의 특수한 환경에서의 문제점들이 노출되어 있다. 이에 본 논문에서는 지하공동구의 출입관리에 대한 문제점들을 파악하고 이를 해결하기 위해 지하공동구의 특수 환경에 적합하며, 체계적인 출입 및 점검 이력의 관리가 가능한 스마트 폰 인증키 기반 지하공동구 출입관리시스템을 제안한다. 제안한 출입관리시스템은 현장 네트워크의 별도 통신망 구축 없이 스마트폰에서 지원하는 블루투스를 사용하여 출입이 가능하며 아울러, 모든 개폐기의 제어 정보를 스마트폰 애플리케이션을 통하여 서버로 전송하여 서버에서의 체계적인 통제 및 이력관리가 가능하다.

• 상하수도학회지
• /
• 제33권5호
• /
• pp.329-339
• /
• 2019

Recently, the advancement of information and communication technology(ICT) is expanding the connectivity through Internet of Things(IoT), and the media of connection is also expanding from wire/cable transmission to broadband wireless communication, which has significantly improved mobility. This hyperconnectivity has become a key element of the fourth industrial revolution, whereas the supervisory control network of purification plants in korea is operated as a communication network separated from the outside, thereby lagging in terms of connectivity. This is considered the best way to ensure security, and thus there is hardly any consideration of establishing alternatives to operate an efficient and stable communication network. Moreover, security for management of a commercialized communication network and network management solution may be accompanied by immense costs, making it more difficult to make new attempts. Therefore, to improve the conditions for the current supervisory control network of purification plants, this study developed a industrial security L2 switch that supports modbus TCP(Transmission Control Protocol) communication and encryption function of the transmission section. As a result, the communication security performance improved significantly, and the cost for implementing the network management system using Historical Trend and information of HMI(Human Machine Interface) could be reduced by approximately KRW 200 million. The results of this study may be applied to systems for gas, electricity and social safety nets that are infrastructure communication networks that are similar to purification plants.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.405-410
• /
• 2016

Elevator industry is a field that is mechanical, electrical and electronic technology and constantly requires inspection and maintenance considering various applications and various types. Recently, various elevator control and monitoring technologies with IT are developing for elevators on land. But technologies with IT have been hardly done in marine elevator that is consistently assured safety and reliability of life cycle for its parts in poor environment. In this paper, we implemented embedded main controller, floor controller and car controller that meet the requirements and use NMEA network protocol by analyzing home and abroad integrated elevator operation and management systems. Especially, we secured reliability of maintenance by real-time fault diagnosis and control that was implemented with limit switch, gyro sensor, temperature/humidity/barometric pressure sensor and fire detection sensor thinking over the environmental conditions of terrestrial and marine elevator.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1574-1579
• /
• 2016

본 논문은 무인항공기 비행시간 향상을 위해 RF 무선 전력 획득 기술을 이용한 self-powered 센서 노드 회로에 관해 설계 연구하였다. 제안하는 센서 노드는 두 가지 경우가 만족하였을 때 동작한다. 마스터 노드의 입력 RF ID와 센서 노드의 ID가 같을 경우와 RF 무선 전력 획득 시스템이 히스테리시스 스위치에 의해 동작될 때다. 마스터 노드의 출력은 263 MHz에서 26 dBm을 사용하였다. RF 전력을 DC 전력으로 변환하는 최대 효율은 마스터 노드에서 2미터 떨어진 지점(4-6 dBm)에서 55 %이다. 최대 RF 무선 전력 획득 범위는 마스터 노드와 센서 노드의 거리가 약 13 m 이다. 센서 노드의 MCU 및 수신기와 온도 센서와 같은 부하의 소비 전력은 10 msec 동안 5.0 V에서 평균 15 mA이다.

• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.857-864
• /
• 2020

본 논문에서는 전술정보통신체계(TICN)의 구성 부체계 중 하나인 교환접속체계에서 이더넷 프로토콜을 지원하고 VoIP 교환기와 연동하여 보안된 음성통화/영상통화를 제공하고 다자간 통화, 지령기능 등의 차등 서비스를 지원하는 다기능형 VoIP 전화기의 야전에서의 전원부 불량을 저감하기 위해 개선한 방법들을 제안하였다. 다기능형 VoIP 전화기의 전용 어댑터 출력전압 인입부의 TVS 적용, PoE 모듈 입력단 TVS 적용, Blocking Diode 추가 및 폴리스위치 뒷단의 DC/DC 컨버터 추가 적용을 통하여 전원부를 개선하고 성능 및 환경 시험등을 수행하여 제안방법 타당성을 입증하였다.

• International journal of advanced smart convergence
• /
• 제5권3호
• /
• pp.16-26
• /
• 2016

This proposed project is about a bicycle anti theft devised system which helps people protect the bicycle from theft and helps to track the stolen bicycle's location using a smart phone. Safety bike uses two main devices to keep the bicycle secured, the vibration sensor and GPS sensor. The purpose of this project is to put all these small devices into one well connected system which will help the bicycle owner have more control over the security of his own bicycle. The whole system can be divided into two main parts. The first part is about the hardware development whereby all electronics components are connected via the circuit design using wire wrapping technique. This hardware part includes, a vibrations sensor, a GPS receiver, a toggle switch, LED light, Bluetooth and a buzzer. Wireless Bluetooth signals are used as the means of communication between the smartphone and the microcontroller. The second part is the software part which is being to program and control the whole system. The program is written using MikroBasic, a full-featured Basic compiler for microcontroller based systems. In conclusion, this system is designed to enable user to have control in securing his/her bicycle also being able to find and locate it at any time using GPS receiver and mobile android application.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.433-439
• /
• 2017

The rodent model has been used frequently to understand stroke pathophysiology, due to its low cost and the large spectrum of genetic strains available. Here, we present a diffuse speckle contrast analysis system (DSCA) with a $1{\times}2$ optical switch that was used to non-invasively assess cerebral blood flow (CBF) changes in the rat during intraluminal suturing for middle cerebral artery occlusion (MCAO) surgery. The blood flow index (BFI) in the left hemisphere was lower than that in the right hemisphere because the left middle cerebral artery was occluded. Furthermore, the performance of the DSCA system was compared with that of commercial laser Doppler flowmetry. The changes in the BFI measured by the two systems were correlated strongly. The DSCA system was less sensitive to motion artifacts and able to measure relatively deep tissue flow in the rat's brain. In conclusion, the DSCA system secured CBF monitoring during surgery in a rodent model without craniotomy.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.11-19
• /
• 2018

In the Unmanned Aerial Vehicle Line-Of-Sight datalink system, there is a possibility that the communication line is disconnected because line of sight can not be secured by one antenna due to changes in position and posture of the air vehicle. In order to prevent this, both top and bottom of air vehicle are equipped with antennas. At this time, if the signal can be transmitted and received by switching to an antenna advantageous for securing the line of sight, communication disconnection can be minimized. The legacy antenna switching method has disadvantages such that diffraction, fading due to the surface or obstacles, interference and reflection of the air vehicle are not considered, or antenna switching standard is not clear. In this paper, we propose an airborne antenna switching method for improving the performance of UAV LOS datalink system. In the antenna switching method, the performance of each of the upper and lower parts of the mounted antenna according to the position and attitude of the air vehicle is predicted by using the deep learning in an UAV LOS datalink system in which only the antenna except the receiver is duplicated. Simulation using flying test dataset shows that it is possible to switch antennas considering the position and attitude of unmanned aerial vehicle in the datalink system.