• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.187-196
• /
• 2013

This study is focused on analyzing the deformation types of seaside armor stones based of field survey in order to establish the cause of abrasion following the deformation of seaside armor stones. 1. The deformation of seaside armor stone in saemangeum sea dike was classified as three different types: floating, deviation, and abrasion. 2. It was discovered that the stones floated to the extent of maximum 50 m, as the result of inspecting floating stones which were situated on different ten places. 3. The average number of deviation in the high ocean wave section was four times more than that in the ordinary ocean wave section, as a result of comparing the deviation number of the ordinary ocean wave section and that of the high ocean wave section for the purpose of inspecting the relation between the deviation of armor stones and the effects of ocean wave. 4. The angular shape of armor stones seen in the initial construction period has been abraded smoothly, as result of comparing of the shape change of armor stones for the purpose of inspecting abrasion state of seaside armor stones. 5. It was discovered that the abrasion of armor stone was severe in the section of many floating stones, as a result of analyzing the levels of abrasion and the cumulative sections of floating stones for the purpose of investigating the cause of abrasion.

• 한국콘텐츠학회논문지
• /
• 제21권12호
• /
• pp.302-309
• /
• 2021

구간과속단속시스템은 시점 순간속도, 종점 순간속도, 구간 평균속도를 측정하여 가장 많이 과속한 부분에 대해서만 과태료를 부과하는 방식으로 관련 연구 자료에 따르면 해당 시스템을 적용한 도로에서 속도 및 사고 감소 효과가 있는 것으로 알려져 있다. 하지만 도로교통법에 따라 시스템의 대부분은 고속도로에 설치되어 기존의 연구는 고속도로 구간을 대상으로 수행되어 왔다. 본 연구에서는 관련법령 개정에 따라 일반국도에도 구간과속단속시스템의 설치가 확대될 것으로 예상 되는 바 일반국도 자동차전용도로인 국도3호선 성남이천로에 설치된 구간과속단속시스템을 대상으로 ITS 수집 및 운영 자료를 활용하여 설치 전, 시범운영기간, 단속이후로 구분하여 통행속도, 통행속도에 대한 표준편차 및 교통사고 감소여부를 분석하였다. 분석결과 설치 후 통행속도, 표준편차, 교통사고는 각각 13%, 25%, 70% 감소하여 구간과속단속시스템 설치가 사고감소에 기여하는 바가 큰 것으로 확인되었다.

• 천문학회보
• /
• 제28권1호
• /
• pp.37-37
• /
• 2003

• 한국항행학회논문지
• /
• 제25권1호
• /
• pp.84-89
• /
• 2021

표준 단일 모드 광섬유가 가지는 색 분산과 비선형 현상에 의한 광 신호 왜곡을 보상할 수 있는 분산 제어와 광 위상 공액이 결합된 링크의 한계인 대칭적 구조를 해결할 수 있는 방법을 제안하였다. 대칭적 구조는 전반 전송 구간과 후반 전송 구간의 중계 구간수, 분산 분포 등등이 광 위상 공액기를 중심으로 대칭되어야 한다는 것을 의미한다. 본 연구에서 제안하는 분산 제어 링크는 광 위상 공액기가 전반의 6개 중계 구간과 후반의 14개 사이에 존재하고, 각 전송 반 구간에서의 평균 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 서로 동일한 구조이다. 제안된 분산 제어 링크에서의 광 신호 왜곡 보상 효과의 분석은 평균 RDPS가 각 전송 반 구간에서 서로 다르게 설정된 링크에서의 결과와의 비교를 통해 이루어졌다. 시뮬레이션 결과 전송 반 구간 사이의 RDPS 평균값의 동일 여부보다 인접한 중계 구간 간 RDPS 편차가 보상에 더 큰 영향을 미치는 것은 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.167-173
• /
• 2011

This paper presents a method for the development of the impedance locus to test the dynamic characteristics of protective relays. Specifically, using the proposed method, the impedance locus can comprise three impedance points, and the speed of impedance trajectory can be adjusted by frequency deviation. This paper is divided into two main sections. The first section deals with the configuration of impedance locus with voltage magnitude, total impedance magnitude, and impedance angle. The second section discusses the control of the locus speed with the means of the deviation between two frequencies. The proposed method is applied to two machine equivalent systems with offline simulation (i.e., PSCAD) and real-time simulation (i.e., real-time simulation environment) to demonstrate its effectiveness.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.51-56
• /
• 2007

Pantograph of the electric train is the important part receiving current by adhereing contact wire. Wearing rate of pantograph or contact wire is changed by the type of pantograph and material of adhering part. In special, the weather influences the relative wearing rate and wearing type of pantograph Slider and Contact wire with steep wearing in arc and life cycle of pantograph slider. Presently, the weather causes side-wearing and over-wearing of pantograph slide installed in electric train. So it is difficult to manage and operate the electric train. Although the quality of slide using in line4 vehicle was finished the test in line 2 vehicle experimentally, it has to apply after pantograph is installed in some electric trains and check the influence in it and contact wire. It is because line4 section is very different from line2 section. Experimental application is the sequence to certify the safety and abrasion resistance importantly by enlarging experimental application with increase of the experimental electric train. The lenth of line4 in Seoul Metro is 71.5[km]. It is long section. The line is mixed DC 1,500[V] section and AC 25,000[V] section. It has underground section of 41.5[km] and ground section of 30[km]. Ground section is about 42% and receives much influence in the rain during the rainy season. After experimental application we found that this pantograph slide has twice as much abrasion resistance despite a little deviation and found the occurrence probability of arc and side-wearing is decreased considerably.

• 핵의학기술
• /
• 제27권1호
• /
• pp.55-61
• /
• 2023

Purpose In this study, the monthly population distribution was calculated for statistical verification of 10 tests (CA19-9, CA15-3, testosterone, PTH, calcitonin, AFP, CEA, CA72-4, PSA, estradiol) with changed reagents, and the trend of change By comparing and analyzing the results, we want to verify the accuracy of the results and improve the reliability of the test. Materials and Methods From June 2021 to February 2023, for the 10 items in which the reagent was changed, the monthly percentage and standard deviation index before and after the reagent change were compared, respectively. At this time, the reference value was arbitrarily set for the comparison group in consideration of the reference value of the test item, and the groups were subdivided and compared, and the standard deviation index allowed range was -2.0 or more and 2.0 or less. Results For CA19-9, CA15-3, AFP, CEA, and calcitonin 5 test items, the change in monthly ratio in all test sections before and after the reagent change was kept constant. On the other hand, for CA72-4, PSA, testosterone, PTH, and estradiol items, the standard deviation index exceeded the acceptable standard after changing the reagent. CA72-4 test items showed an increasing trend in standard deviation index in the test section exceeding the reference value. In the case of the PSA test item, the maintenance ratio of 0.04 ng/mL was significantly decreased after changing the reagent. The testosterone test item had a standard deviation index of -2.5 in the test section exceeding 10.1 ng/mL after changing the reagent, and the standard deviation index of the PTH test item was out of the acceptable range in all test sections. It was confirmed that the estradiol test item showed an overall increase in the result value. Conclusion Through this study, the continuity and accuracy of the test results could be verified. It is considered that the stability of the test can be secured by analyzing the factors affecting the test result and solving the cause for the test item whose standard deviation index is out of the acceptable standard.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.193-198
• /
• 2002

In 1his paper, applicability of laser welding to joining process of single crystal nickel base superalloy turbine blades was investigated. Because heat input of laser welding is more precisely controlled 1han TIG welding, it is possible to optimize solidification microstructure of the welds. Since in single crystal nickel base superalloy the crystal orientation have a significant effect on the strength, it is important to control the solidification microstructure in the fusion zone. A single crystal nickel base supera1loy, CMSX-4, plates were bead-on welded and butt welded using a $CO_2$ laser. The effects of microstructure and crystal orientation on properties of the weld joints were investigated. In bead-on weldling, welding directions were deviated from the base metal [100] direction by 0, 5, 15 and 30 degrees. The welds with deviation angles of 15 and 30 degrees showed fusion zone transverse cracks. As the deviation angles became larger, the fusion zone had more cracking. In the cross section microstructure, the fusion zone grains in 0 and 5 degrees welds grew epitaxially from the base metal spins except for the bead neck regions. The grains in the bead neck regions contained stray crystals. As deviation angles increased, number of the stray crystals increased. In butt welding, the declinations of the crystal orientation of the two base metals varied 0, 5 and 10 degrees. All beads had no cracks. In the 5 degrees bead, the cross section and surface microstructures showed that the fusion zone grains grew epitaxially from the base metal grains. However, the 10 degrees bead, the bead cross section and surface contained the stray crystals in the center of the welds. Orientations of the stray crystals accorded with the heat flow directions in the weld pool. When the welding direction was deviated from the base metal [100] direction, cracks appeared in the area including the stray crystals. The cracks developed along the grain boundaries of the stray crystals with high angles in the final solidification regions at the center of the welds. The fracture surfaces were covered with liquid film. The cracks, therefore, found to be solidification cracks due to the presence of low melting eutectic. As the results, in both bead-on welding and butt welding the deviation angles should be control within 5 degrees for preventing the fusion zone cracks. To investigate the mechanical properties of the weld joints, high temperature tensile tests for bead-on welds with deviation angles of 0 and 5 degrees and the butt welds with dec1ination angles of 0, 5 and 10 degrees were conducted at 1123K. The the tensile strength of all weld joints were more 1han 800MPa that is almost 80% of the tensile strength of the base metal. The strength of the laser weld joints were more than twice that of tue TIG weld joints with a filler metal of Inconel 625. The results reveals 1hat laser welding is more effective joining process for single crystal nickelbase superalloy turbine blades 1han TIG welding.

• 산업기술연구
• /
• 제27권B호
• /
• pp.229-233
• /
• 2007

This research investigated the way of generating the flowing of water in case of artificial fluctuation of river width by the unidimensional numerical analysis in order to reconstruct vertical and expanse features of flowing, and the problem of existing numerical analysis in accordance with local enlargement and reduction of river through hydraulic model experiments with results of numerical analysis. The result revealed that when the local section change in the same river is exist, it showed 0.93m in the case of no change of local section in the hydraulic model experiments and numerical analysis, however, it presented 1.645m on the occasion of local section changes in the hydraulic model experiments and numerical analysis. In other words, there was a significant difference in the existing numerical analysis, when there was a local section change. As a result of the experimental section for the enlargement and reduction of local river width, due to the sensitive change for fluctuation of flood discharge, there was a significant difference between numerical analysis and hydraulic model experiments. In addition, the result of comparison between the enlargement and reduction of local river width confirmed that the result of numerical analysis with hydraulic model experiments showed larger generation of deviation in case of enlargement of section than in case of reduction of section.

• 한국항행학회논문지
• /
• 제23권6호
• /
• pp.570-576
• /
• 2019

광 네트워크의 융통적 구성을 위해 전체 전송로 중간이 아닌 위치에 존재하는 광 위상 공액기를 갖는 분산 제어 링크를 제안하였다. 제안하는 분산 제어 링크에서 광 위상 공액기는 6개 중계 구간으로 구성되는 전반 전송 구획과 14개로 구성되는 후반 전송 구획 사이에 존재하고, 각 전송 반 구획에서의 평균 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 서로 다른 비대칭 구조이다. 또한 파장 분할 다중 채널의 왜곡 보상을 위하여 각 중계 구간마다 실제 RDPS를 점진적으로 증가/감소시키는 인위적 분포 구조를 채택하였다. 시뮬레이션 결과 제안된 16개의 비대칭 분포 제어 링크 구조 중 인접한 중계 구간 간 RDPS 편차를 적게 하여 전반 전송 구획에서는 중계 구간의 실제 RDPS를 점진적으로 감소시키고 후반 전송 구획에서는 중계 구간의 실제 RDPS를 점진적으로 증가시키는 구조가 왜곡된 파장 분할 다중 채널의 보상에 적합한 것을 확인하였다.