• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.135-147
• /
• 2000

Section design of vehicle structure has been developed by two methods. One is the section property method which uses section property as a design variable. This method shows the tendency of an optimum section approximately. The other method is the section shape method which utilizes geometric parameter of section as a design variable. Practical solutions are obtained by this method. However, it is very expensive for large-scale problems due to the large number of geometric parameters. These two methods are compared through several sample problems. The finite element method is used for the structural and sensitivity analyses. The results are analyzed based on the number of function evaluations, the quality of cost function, the complexity of programing, and etc. The applications of both methods are also discussed.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.195-204
• /
• 2017

This case study introduces the construction of large cross section tunnel for underground ventilation system in Sillim-Bongcheon Tunnel Project. In order to grant the safety and efficiency in connecting the ventilation shaft (7.8 m of width, and 6.6 m of height) to a tunnel for axial fan facility (20.8 m of width, and 12.3 m of height), gradual enlargement of tunnel cross section was employed between those and temporary support method was determined based on Q system. In addition, some original designs were revised during construction stage to improve the efficiency of excavation in large cross section tunnel. The advance length was optimized and top heading of the tunnel was excavated without partition in accordance with ground condition and numerical stability analysis results. It is believed that some experiences and considerations in this case study will be useful for the future design and construction in similar large cross section tunnel such as large underground ventilation system or road tunnel with four lanes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.646-652
• /
• 2017

The effect of plasma on mono-static radar cross section under atmospheric pressure is demonstrated when the dielectric barrier discharge actuator has plasma layer. The volume of plasma layer is increased by using planar array of electrodes. Because the incident wave has electric field which is perpendicular to the electrode array, the undesired effect on radar cross section caused by structure of plasma actuator is minimized. In experiments, mono-static radar cross section is measured at the frequencies from 2 GHz to 25 GHz. The generated plasma reduces the radar cross section at frequencies above 18 GHz, and the amount of reduction reaches to 8 dB in maximum. The reduction can be controlled by changing the peak-to-peak voltage from high voltage generator. The result shows the possibility of plasma as a flexible radar cross section controller.

• Journal of Information Processing Systems
• /
• v.7 no.4
• /
• pp.561-580
• /
• 2011

This paper describes different aspects of a typical RFID implementation. Section 1 provides a brief overview of the concept of Automatic Identification and compares the use of different technologies while Section 2 describes the basic components of a typical RFID system. Section 3 and Section 4 deal with the detailed specifications of RFID transponders and RFID interrogators respectively. Section 5 highlights different RFID standards and protocols and Section 6 enumerates the wide variety of applications where RFID systems are known to have made a positive improvement. Section 7 deals with privacy issues concerning the use of RFIDs and Section 8 describes common RFID system vulnerabilities. Section 9 covers a variety of RFID security issues, followed by a detailed listing of countermeasures and precautions in Section 10.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.416-423
• /
• 2015

The study was conducted targeting 25 patients who underwent the respiratory gated radiation therapy in the abdominal region at Radiation Oncology of a University Hospital from December 2013 to June 2014 and types of cancer included liver(64%), CBD(8%), gastric(8%), GB(8%), pancreas(8%), SMA(4%). The means of ITV and PTV volume are 471.44 cm3 and 425.48 cm3, showing an increase in volume. Normal tissue volume was also found to have increased due to the increase of the section selected from PTV section to ITV section. Right kidney showed a significant increase in differences between increase in normal tissue volume, increase in target volume and increase in therapy irradiation area and difference between the means of dose applied to normal tissue. There was no significant difference in the mean dose applied to normal tissue according to the respiratory average. Both kidneys showed a significant difference in the difference between mean doses of target moving and normal tissue. In this study, both therapy methods through PTV section and ITV section volume setting were appropriate for protection doses of normal tissue and distributed over 95% of the prescribed dose and therefore, it is considered to be okay to be optionally used depending on the patient's therapeutic purpose. But in order to minimize the unexpected side effect, the plan of PTV section and ITV section should be established and used by evaluating normal tissue protection dose.

• Journal of Korean Academy of Nursing
• /
• v.34 no.2
• /
• pp.324-332
• /
• 2004

Purpose: The purpose of this study was to explain differences of cesarean section rates according to San- Yin-Jiao(SP6) acupressure for women in labor. Method: A noneqivalent control group pre test - post test design was used to explain differences of cesarean section rates according to SP6 acupressure. The participants were 209 women who were assigned to one of three groups SP6 acupressure(n=86), SP6 touch(n=47), and control group(n=76). For 30 minutes, the SP6 acupressure group received SP6 acupressure, and the SP6 touch group received SP6 touch for the duration of each uterine contraction. The Control group was encouraged to deep breath and relax for the duration of each uterine contraction for 30 minutes. Result: The rates of cesarean section were 12.8%, 29.8%, and 22.4% for the SP6 acupressure group, SP6 touch group, and control group respectively. There was a significant difference among groups (p=0.049). Cesarean section rateswere significantly different between the SP6 acupressure and non-SP6 acupressure group(p=0.035). Conclusion: This finding shows that 30 minutes of SP6 acupressure was effective in decreasing the cesarean section rate. Therefore, SP6 acupressure during labor could be applied as an effective nursing intervention.

• International Journal of High-Rise Buildings
• /
• v.8 no.3
• /
• pp.201-209
• /
• 2019

This paper presents a structural design of the "(Tentative Name) Toranomon Hills Residential Tower" which is currently under construction in Tokyo. The building is a reinforced concrete high-rise residential complex building with 54 stories above ground, 4 basement levels, and a building height of about 220 m. It is a requirement to provide the highest grade of residence in Japan, and in terms of the structural design, it is required to provide wide and comfortable spaces with high seismic performance. These requirements are satisfied by providing a total of 774 vibration control walls of two types. Also, to further improve the structural performance, steel fibers at the rate of 1.0vol% are provided in the ultra-high strength concrete used in the column members.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.759-766
• /
• 2016

This paper is on a system design of recognizing sound sources and tracing locations from detecting a section of sound sources which is strong in surrounding environmental sounds about sound sources occurring in an abnormal situation by using signals within the section. In detection of the section with strong sound sources, weighted average delta energy of a short section is calculated from audio signals received. After inputting it into a low-pass filter, through comparison of values of the output result, a section strong in background sound is defined. In recognition of sound sources, from data of the detected section, using an HMM(: Hidden Markov Model) as a traditional recognition method, learning and recognition are realized from creating information to recognize sound sources. About signals of sound sources that surrounding background sounds are included, by using energy of existing signals, after detecting the section, compared with the recognition through the HMM, a recognition rate of 3.94% increase is shown. Also, based on the recognition result, location grasping by using TDOA(: Time Delay of Arrival) between signals in the section accords with 97.44% of angles of a real occurrence location.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.3 s.10
• /
• pp.125-132
• /
• 2003

In this study, safety analysis of river in flash flood due to local extraordinary rainfall was conducted for the Hong-Je river, which was selected as a representative sample basin because it is one of the most urbanized rivers in Seoul. The rainfall data of precipitation 310.1 mm and probable maximum precipitation (PMP) 740.0 mm in July $14{\sim}15$, 2001 was used to perform safety analysis. Resulting of safety analysis of the flood control in Hong-Je river, case of the 50 year of design frequency, safety section, management section, and danger section were represented to be 85%, 15%, and 0% respectively. For the 200 year of design frequency, safety section decreased by 6% and management section and danger section increment by 4% and 2%, respectively, The variation of management section was not observed with respect to 200 year of frequency. Little variation of safety value for management section for 300 and 500 of frequency increased by 8% and 12% relative to 50 year of frequency, respectively. management section and danger section for 1000 year of frequency increased by 19% and 13% relative to 50 year of frequency.

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.