• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.94-100
• /
• 2016

A novel optical design for high resolution, large field of view (FOV) and multispectral remote sensing is presented. An f/7.3 Korsch and two f/17.9 Cook three-mirror optical systems are integrated by sharing the primary and secondary mirrors, bias of the FOV, decentering of the apertures and reasonable structure arrangement. The aperture stop of the Korsch system is located on the primary mirror, while those of the Cook systems are on the exit pupils. High resolution image with spectral coverage from visible to near-infrared (NIR) can be acquired through the Korsch system with a focal length of 14 m, while wide-field imaging is accomplished by the two Cook systems whose focal lengths are both 13.24 m. The full FOV is 4°×0.13°, a coverage width of 34.9 km at the altitude of 500 km can then be acquired by push-broom imaging. To facilitate controlling the stray light, the intermediate images and the real exit pupils are spatially available. After optimization, a near diffraction-limited performance and a compact optical package are achieved. The sharing of the on-axis primary and secondary mirrors reduces the cost of fabrication, test, and manufacture effectively. Besides, the two tertiary mirrors of the Cook systems possess the same parameters, further cutting down the cost.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.59-70
• /
• 2016

Packaging is thought to contribute to the consumers' purchasing choice of the powdered infant formula products. In Asian market, the products of international and local brands are competing. Evaluation and analysis of food package functions for a variety of brand products will be helpful for the innovative packaging development. Thus, the packaged products of powdered infant formula were collected in Chinese, Indonesian and Korean supermarkets as a typical Asian market and examined in terms of main food packaging functions. Metal cans were the most dominant type of big size package (800-1000 g) while flexible bags were often the common one of medium size (400 g). In general, convenience function was provided in forms of easy opening device and portioning take-out spoon. Information on primary and secondary shelf lives was given besides nutritional facts and use instruction for communication function. The combination of $N_2$ and $CO_2$ was usually employed to protect powdered infant formula in rigid packages, whereas only $N_2$ was used to protect product in most flexible packages.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.909-917
• /
• 2020

The research aims to analyze the firm-specific and macroeconomic factors that affect insurance company's financial performance. The research explores the variables that influence the financial performance of the United Arab Emirates (UAE)' insurance companies. The analysis for determining financial performance considers the following variables: the firm's age, retention ratio, capital adequacy, underwriting risk/loss ratio, financial-leverage, reinsurance dependency, and macro-economic factors such as GDP per capita, inflation rate considered as independent factors. The return-on-asset (ROA) is the key measuring indicator; it is regarded as the dependent variable for financial performance measures. The research focuses on secondary information obtained from insurance companies' financial statements. The researcher targeted 18 insurance companies listed on the UAE stock exchanges for study purposes. The research examines the overall factors that influence the financial performance of an insurance company. For analysis of data, software package of social sciences (SPSS version 20) is used. The studies used correlation and multiple linear regression analysis to determine financial performance and their effects. The analysis suggests that there are important and constructive relationships between the size, capital adequacy, and reinsurance dependency, while loss ratio, retention ratio, and financial leverage indicate a major negative relationship. And there's no link between GDP per capita and inflation.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.2
• /
• pp.7-16
• /
• 2018

Purpose - This research addresses the question of how an international retailer like Costco can succeed in a foreign mature market and satisfy the local consumers. Our study aims to promote our understanding of how foreign retailers influence local consumers in a mature market with differentiated business models. Research design, data, and methodology - Our study uses company publications, secondary sources of information and the results of a questionnaire survey consisting of 106 participants. Consumer responses were solicited through a questionnaire survey conducted in the city of Kobe in December of 2013. Results - Product differentiation from local retailers in a mature market like Japan gave Costco a competitive edge. Compared with local supermarkets, Costco was preferred by Japanese consumers for its variety of goods that it carries, as well as in-store promotion large package of selling units, in-store amenities, and customer services. Conclusions - First, a theoretical framework is proposed in this study that can aid in developing localization strategies in a mature market such as Japan. Second, it reveals that an international retailer can succeed in a foreign market by stimulating local consumers to change their purchasing behavior, without having to alter the prevailing format of operation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.351-358
• /
• 1994

A probabilistic model and analysis methods to determine the means and variances of the velocity and acceleration in stochastically-defined planar pin jointed kinematic chains are presented. The presented model considers the effect of tolerances on link length and radial clearance and uncertainty of pin location as a net effect on the link's effective length. The determination of the mean values and variances of the output variables requires the calculation of sensitivities of secondary variables with respect to the random variables. It is shown that this computation is straightforward and can be accomplished by a conventional kinematic analysis package with minor modification. Thus, the concepts of tolerance and clearance have been captured by the model and analysis. The only input data are the nominal linkage model and statistical information. The "effective link length" model is shown to be applicable to both analytical solution and Monte Carlo simulation. The results from both methods are compared. This paper Ksolves the higher-order kinematic problems for the probabilistic design analysis of stochastically-defined mechanisms.echanisms.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.6
• /
• pp.39-45
• /
• 2012

This paper describes the outcome of the design of a 200 kW class micro gas turbine and the sensitivity of its performance (efficiency and power) to the variations in major design parameters. The reference design parameters were set up based on the best available component technologies. The resulting net electricity generation efficiency of the micro gas turbine package was found to be competitive to those of other systems in the market. The sensitivities of power and efficiency to the variations in compressor and turbine efficiencies, pressure ratio, turbine inlet temperature, recuperator effectiveness, secondary air ratio, pressure loss ratios of both the cold and hot sides of the recuperator were estimated. Based on the sensitivity data, a simplified method to predict the variation in system performance responding to the combinations of small changes in all design parameters were set up and validated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.249-257
• /
• 1999

A three dimensional finite model of a human neck has been developed in an effort to study the mechanics of cervical spin while subjected to vertical impact. This model consisting of the vertebrae from C1 through C7 including posterior element and ligaments was constructed by 2mm thick transverse CT cross-sections and X-ray film taken at lateral side. Geometrical nonlinearity was also considered for the large deformation on the disc. ABAQUS package was used for calculation and its results were verified comparing with responses of a model under static loading condition with published in-vitro experimental data. There were more cervical fracture in the restrained (compression) mode than in the nonrestrained (flexion-compression and extension-compression) mode. Upper cervical(C1-C2) injuries were observed under compression-extension modes, while lower cervical injuries occurred undjer compression-flexion modes. Posterior ligament distraction without bony damage at the upper cervical spin(C1-C2) were observed secondary to C5-C7 trauma in compression-flexion modes.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.1
• /
• pp.45-52
• /
• 2016

Objectives: The purpose of the study was to investigate the cumulative dental caries rate of pit and fissure sealant in community public health program from 2005 to 2008 follow-up. Methods: The subjects were 4,768 students of 34 elementary schools in Gimcheon. The survey included direct oral examination and cumulative retention rate of pit and fissure sealant from 2005 to 2008. Data were analyzed using PASW statistical package version 18.0 and the level of significance was set at p<0.05. Results: The cumulative retention rate of sealant was 18%, 25%, and 33% after 1 year, 2 years, and 3 years, respectively. In addition, the cumulative retention rate of lower teeth was higher than that of upper teeth. Cumulative dental caries rate increased in sealed group and no sealed group. The cumulative dental caries rate decreased owing to tooth brushing frequency in sealed group and no sealed group. Conclusions: Regular and timely tooth brushing can maintain good oral health condition after tooth sealing. The school based oral health education can prevent loss of sealant and secondary caries.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.4
• /
• pp.1-14
• /
• 2021

Purpose: This study aims to measure the level of satisfaction with the overall education of current students, who are major consumers of education by department at the Health Care Convergence University, and to establish development strategies such as improving education quality and satisfaction by deriving problems and improvements. Research design, data and methodology: This study drew conclusions through secondary data analysis based on data surveyed by the Educational Performance Management Center of a university in the academic year of 2020. The target of the education consumer satisfaction survey was 470 students of the College in the academic year 2020. Frequency analysis and correlation analysis were applied to the data using the statistical package program SPSS 25 version. Results: In the major curriculum satisfaction survey, the department with the highest score was optics and optics, 4.11, and the department with the lowest score was medical IT, 3.29. Conclusions: The department with the highest correlation in the correlation analysis result of the demand survey by department was the Department of Medical Management and the Department of Medical IT, with a correlation coefficient r=0.984, and the lowest correlation in the correlation analysis result of the demand survey by department was the Department of Medical IT and Dental Hygiene, with a correlation coefficient r= -0.085.

• The Korean Journal of Health Service Management
• /
• v.13 no.1
• /
• pp.55-65
• /
• 2019

Objectives: The purpose of this study is to analyze basic data on socio - demographic characteristics, occupational careers, and desire for employment of job seekers in their Fifties and Sixties using a portal site. Methods: For this research, secondary data were collected by the researcher from 704 job seekers and were statistically analyzed using the SPSS package. Results: The results of the analysis are as follows: Most job seekers want a job that suits their competence and career trajectory, but the reality is that as their age increases, jobs suitable for those in their fifties and sixties are hard to find; thus these job seekers accept simple labor or functional jobs. Conclusions: Differences were found in work conditions such as occupation level, job position, total career years, desired employment type, and expected salary depending on socio - demographic variables. Consequently, improvements should be made for various job searching paths for older adults as well as increasing the accessibility of job searching information.