• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.962-968
• /
• 2013

Problem of greenhouse gases associated with global warming and the world rise in fuel oil prices due to the depletion of fossil fuel has attracted attention. For this reason, maritime transport business, has shown interest in green-ship technology to reduce the consumption of fuel and reduce greenhouse gas for environmental protection. Power system of the ship is one of the most important factors for safe operation. Therefore, at design of ship power system, most of existing vessel used comparative large capacity generator in order to respond peak load such as bow thruster, crane and etc. In the navigation of ship, marine generators most would be operated at low load operation. In the low load operation of the generation rate of 50% or less, the operation efficiency of the generator it deteriorated, to consume more fuel oil. It also, it means that adversely effect the life of the generator. In this paper, studied how to apply for a secondary battery in container ship that relatively frequent arrival and departure in port. As a result, in order to apply the secondary battery to increase the operating efficiency of the generator during the voyage, it was confirmed that it is possible to reduce fuel consumption.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.566-572
• /
• 2020

In a wireless power transmitter, the characteristics and effects of wireless power transmission between two induction coils are investigated, and a power converter circuit and a battery charger/discharger circuit using wireless power transmission technology are proposed. The advantage of wireless power transmitters and wireless chargers is that, instead of the existing plug-in-mounted wired charger (OBC; on-board charger), the user can wirelessly charge the battery without connecting the power source when charging power to the battery. There is. In addition, the advantage of wireless charging can bring about an energy efficiency improvement effect by using the secondary side rectifier circuit and the receiving coil, but the large-capacity long-distance wireless charging method has a limitation on the transmission distance, so many studies are currently being conducted. The purpose of the study is to study the transmitter circuit and receiver circuit of a wireless power transmission device using a primary coil, a secondary coil, and a half bridge series resonance converter, which can transmit power of a non-contact type power transmitter. As a result, a new topology was applied to improve the power transmission distance of the wireless charging system, and through an experiment according to each distance, the maximum efficiency (95.8%) was confirmed at an output of 3 kW at an 8 cm transmission distance.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.415-420
• /
• 2014

Another crucial issue is a providing secondary user(SU) with the its guaranteed quality of service(QoS) in cognitive radio systems, from the SU view to be allowed to opportunistically utilize the primary user(PU) spectrum on non-interfering. In this paper, we propose a bandwidth reallocation scheme for reducing SU dropping rate through renegotiation of requested channel numbers when available bandwidth is not enough for accepting the spectrum handoff SUs. We categorize SU calls into two types : the first priority and the second priority SU, and the first SU' service is supported by bandwidth reservation based on ARMA prediction model for PU arrivals, while the second SU's bandwidth demands for spectrum handoff is to be reallocated through their renegotiation. Simulation results show that our scheme can improve SU dropping rate and system resource utilization efficiency by bandwidth reallocation.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2013

In the next generation of ATM, ADS-B(Automatic Dependent Surveillance-Broadcast) and multilateration are the main technology recommended by ICAO(International Civil Aviation Organization). However, there are a lot of non-equipped ADS-B aircraft today. Therefore, TIS-B(Traffic Information Service-Broadcast) provides traffic information, which has obtained from radars for non-equipped ADS-B aircraft. In this paper, we presented an onboard multilateration system for non-equipped ADS-B aircraft using SSR(Secondary Surveillance Radar) signal instead of TIS-B. TIS-B has a lot of error because of using radar data, but multilateration has less error than radar because of using TDOA(Time Difference of Arrival) method. Results of performance analysis show that the position accuracy is improved by the proposed method using on-board multilateration.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2017

MLAT which is an independent cooperative surveillance system is applied to increase the positon resoultin of secondary survelliance radar. MLAT uses the hyperboic or hyperboloid position mesurement algorithm. Central processing unit of MLAT calculates target position using time difference of arrival (TDOA) which can be solved from time of arrival (TOA) information of each receivers (at least 4 receivers). To increase position resolution of MLAT which use TDOA, TOA which is transfer time from tranmitter to receiver shold be calculated with precision time resolution in receiver. This paper explained the MLAT system briefly and explained ATD which is one of means of calcuating pulse position. ATD is applied to solve the deviation of pulse position due to different amplitude of signals in mulitiple receivers. In this paper, to analysis the performance of ATD, the simulation result of LAS and CDS was compared with the simulation result of basic threshold method.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.259-268
• /
• 2004

For the last years, it has become hot issue such as disposal of the treated wastewater, which caused by increment of a population and industrial development at the coastal areas. The ocean outfall system discharges primary or secondary treated effluent into coastline or at the deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the see, surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. This paper deals ocean outfall design which effects to decision-making about marine environment management and wastewater treatment. In order to make predictions of dilution of discharged water and the trajectory of a plume, CORMIX has been used considering several elements including a seasonal and tidal changes. These solutions are strung together to provide basic data and general drawings for effective management of outfall.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.347-352
• /
• 2014

In this paper, we propose a Markovian queueing model(M/M/1)-based call admission control to reduce forced terminating rate of non-real secondary user's call for Multi-services Cognitive Radio Networks. A existing control has a problem that the forced terminating rate increases because of adopting a policy of spectrum priority allocation to real calls. In our scheme the rate can be reduced as the call that has no useful spectrum waits in a queue until getting an available spectrum. Our scheme use a neural-net based prediction of primary user's reappearance. Through the simulation, we analysis the call forced terminating rate, access delay and spectrum utilization efficiency, and then show that our scheme can more reduce the forced terminating rate of the call, compared to that of the existing algorithm.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.629-636
• /
• 2014

To minimize secondary damages from marine environment pollution resulting from marine accidents, International Maritime Organization(IMO) adopted "Guidelines on Places of Refuge(POR) for ships in need of assistance" as Resolution A.949(23) in it is 23rd General Assembly in 2003 and recommends Parties to the Organization designate PoR. This resolution suggests that they establish a "Decision-Making process" so as to provide reasonable PoR when disabled ships request use of PoR. Korea has not been performed introduce a PoR system in the country. Therefore, there is no decision-making process to deal with ships which need PoR. When Korea implements the PoR system in the future, the nation should establish a Decision-Making process to provide reasonable PoR in case ships in need of assistance request for PoR. In order to present what should be considered in the process of establishing a Decision-Making process for PoR in Korea in the future, in this study presents matters which should be considered in the process of founding PoR Decision-Making processes. When Korea tries to conduct POR system so that other countries' PoR Decision-Making process and the relating process of IMO and REMPEC (Regional Marine Pollution Emergency Response Centre for the Mediterranean Sea) were investigated and analyzed. In addition, in times of marine accident in Korea's sea areas, Korea's action manuals for marine accident which regulates management for an accident is analyzed and articles will be presented to be taken into account during establishing final PoR Decision-Making process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.855-862
• /
• 2009

This paper contains the signal receiving algorithm for Galileo E5 AltBOC signal and the development of Galileo E5 signal receiving software. The software runs the process from signal acquisition to extracting measurement data to get navigation solution. It uses logged IF data file as an input. In signal acquisition stage, 1ms and delayed 1ms data are used for reducing correlation ross from secondary code and navigation bit conversion. Signal tracking stage is made of two stages which are coarse tracking and fine tracking. It is for taking advantage of AltBOC characteristic and resolving ambiguity problem due to BOC modulation. The functions of software are verified by signal processing using logged IF data from commercial GNSS simulator.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.2
• /
• pp.91-109
• /
• 1994

Technological and organisational changes in transport system have introduced new dimension into port system development and inter-port competition. The quality of service now required by the customer is costly and not easily provided by small shipping companies and small ports. It has been suggested that in the future container shipping may be concentrated by space-sharing arrangements or actual mergers into the hands of a few mega-operators with the investment potential to provide total logistics networks. In order to compete effectively, high load factors will be essential and port concentration inevitable. A fa-voured few ports will become the load centres and other ports will assume a secondary feeder role. In this study, three questions are raised and attempts are made to answer them : (a) what is the new role of ports today ; (b) why should ports be engaged in this new role ; and (c) how can ports play this new role. In short, a modern port should be a service centre and a logistic platform for international trade and transport-a third generation port. Ports, in particular, have to make every effort to be competitive in the cost and quality of services and to make the port a transport and distribution service centre. For most ports, this is not an option but a must ; an essential requirement for survival in this win or lose situation. The best way to win is to maintain a close contact with port users, listen to them, discuss with them, help them and satisfy them. That is port marketing. Starting from the findings of port marketing, it is es-sential to work out appropriate development plans and marketing targets and to improve port competitive-ness. As an alternative method, a port competitiveness model is suggested, which may help port managers to make appropriate improvements.