• Journal of computational fluids engineering
• /
• v.8 no.1
• /
• pp.8-15
• /
• 2003

Three-dimensional endwall flow within a linear cascade passage of high performance turbine blade is simulated with a 3-D Wavier-Stokes CFD code (MOSA3D), which is based on body-fitted coordinate system, pressure-correction and finite volume method. The endwall flow characteristics, including the development and generation of horseshoe vortex, passage vortex, etc. are clearly simulated, consistent with the generally known tendency. The effects of both turbulence model and convective differencing scheme on the prediction performance of endwall flow are systematically analyzed in the present paper. The convective scheme is found to have stronger effect than the turbulence model on the prediction performance of endwall flow. The present simulation result also indicates that the suction leg of the horseshoe vortex continues on the suction side until it reaches the trailing edge.

• Journal of Power Electronics
• /
• v.12 no.2
• /
• pp.258-267
• /
• 2012

An interleaved single-stage AC/DC converter with a boost converter and an asymmetrical half-bridge topology is presented to achieve power factor correction, zero voltage switching (ZVS) and load voltage regulation. Asymmetric pulse-width modulation (PWM) is adopted to achieve ZVS turn-on for all of the switches and to increase circuit efficiency. Two ZVS half-bridge converters with interleaved PWM are connected in parallel to reduce the ripple current at input and output sides, to control the output voltage at a desired value and to achieve load current sharing. A center-tapped rectifier is adopted at the secondary side of the transformers to achieve full-wave rectification. The boost converter is operated in discontinuous conduction mode (DCM) to automatically draw a sinusoidal line current from an AC source with a high power factor and a low current distortion. Finally, a 240W converter with the proposed topology has been implemented to verify the performance and feasibility of the proposed converter.

• Proceedings of The Korean Cleft Lip And Palate Association
• /
• 2002.05a
• /
• pp.26-26
• /
• 2002

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.33-39
• /
• 2008

The purpose of this study is not only to evaluate the stress behavior of tubes in superheater in HRSG during the load change operation but also to find root causes of failure from stress behavior. Firstly, temperature during operation was collected to perform stress analysis from actual HRSG. Part load and full load stress analysis which can be represented as the whole load change operations were performed using commercial finite element software. The possibility that can lead to tubes failure is found by stress analysis and its results is compared with metallurgical mircrostructure of failed tube which was taken from actual HRSG.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.476-478
• /
• 1995

The conventional technique to deal with CT saturation is overdimensioning of the core so that CTs can carry up to 20 times the rated current without exceeding 10% ratio correction. However, this not only reduces the sensitivity of relays, but also increases the CT core size in proportion to the expected maximum fault current to avoid CT saturation. This paper presents a technique of estimating the secondary current corresponding to the CT ratio which can reduce the required CT core cross section significantly.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.4
• /
• pp.243-247
• /
• 2012

The velopharynx is a tridimensional muscular valve located between the oral and nasal cavities, consisting of the lateral and posterior pharyngeal walls and the soft palate, and controls the passage of air. Velopharyngeal insufficiency may take place when the velopharyngeal valve is unable to perform its own closing, due to a lack of tissue or lack of proper movement. Treatment options include surgical correction, prosthetic rehabilitation, and speech therapy; though optimal results often require a multidisciplinary approach for the restoration of both anatomical and physiological defect. We report a case of 56 year old male patient presenting with hypernasal speech pattern and velopharyngeal insufficiency secondary to cleft palate which had been surgically corrected 18 years ago. The patient was treated with a combination of speech therapy and palatal lift prosthesis employing interim prostheses in various phases before the insertion of definitive appliance. This phase-wise treatment plan helped to improve patient's compliance and final outcome.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1370-1372
• /
• 2004

At present. distance relay and ${\Delta}I$ current increment relay are used as primary and secondary protection in the AC feeder system. However. electric railway vehicles according to power electronic's development had developed resistance control, thyristor phase control and PWM control system. and operation of train is increasing in a feeder section. Therefore this paper analyzes the load characteristics and situation of relay's maloperation caused by load current increase, harmonics, regenerative braking current and operation of the different vehicles in same feeder section. Based on this analysis. this paper proposes consideration items for relay correction and advanced adaptive relay that can change operation area according to load current.

• Korean Journal of Head & Neck Oncology
• /
• v.13 no.1
• /
• pp.86-89
• /
• 1997

Neurofibromatosis, now termed neurofibromatosis type I, is known as a congenital and familial disease presenting abnormalities of the skin, nervous system, bones, and soft tissue. We experienced a case of extremely large neurofibromatosis which developed on the orbital and temporal region of a 24-year-old man. The tumor was widely excised including normal skin margin, outer table of cranium, a part of zygoma and maxilla. Bony defect was reconstructed by rib bone graft and secondary cosmetic correction of blepharoptosis was performed using supratarsal fixation in postoperative 6 months.

• Korean Journal of Optics and Photonics
• /
• v.31 no.1
• /
• pp.20-25
• /
• 2020

To design a wide-field two-mirror system, the system must feature an off-axial field, to avoid ray obstruction and field screening by the secondary mirror. The off-axial aberrations of the system cannot be corrected sufficiently, though, because there are only a few design parameters. The present study designs an improved off-axial-field two-mirror system using a decentered aperture stop.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.521-526
• /
• 2008

Purpose: Most burn scar contractures are curable with skin grafts, but free flaps may be needed in some cases. Due to the adjacent tissue scarring, local flap is rarely used, and thus we may consider free flap which gives us more options than local flap. However, inappropriate performance of free flap may lead to unsatisfactory results despite technical complexity and enormous amount of effort. The author will discuss the points we should consider when using free flaps in treating burn scar contractures Methods: We surveyed patients who underwent free flaps to correct burn scar contractures from 2000 to 2007. We divided patients into two groups. The first group was those in which free flaps were inevitable due to exposure of deep structures such as bones and tendons. The second group was those in which free flap was used to minimize scar contracture and to achieve aesthetic result. Results: We performed 44 free flap on 42 patients. All of the flaps were taken well except one case of partial necrosis and wound dehiscence. Forearm free flap was the most common with 21 cases. Most of the cases(28 cases) in which free flaps were inevitable were on the wrist and lower limbs. These were cases of soft tissue defect due to wide and extensive burns. Free flaps were done in 16 cases to minimize scar contracture and to obtain aesthetic outcome, recipient sites were mostly face and upper extremities. Conclusion: When using free flaps for correction of burn scar contractures, proper release and full resurfacing of the contracture should be carried out in advance. If inadequate free flap is performed, secondary correction is more challenging than in skin grafts. In order to optimize the result of reconstruction, flap thickness, size and scar of the recipient site should be considered, then we can achieve natural shape, and minimize additional correction.