• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.715-728
• /
• 1997

The aim of this paper is to investigate the secondary buckling behaviour and mode-coupling of spherical caps under uniformly external pressure. The analysis makes use of a rotational finite shell element on the basis of strain-displacement relations according to Koiter's shell theory (Small Finite Deflections). The post-buckling behaviours after a bifurcation point are analyzed precisely by considering multi-mode coupling between several higher order harmonic wave numbers: and on the way of post-buckling path the positive definiteness of incremental stiffness matrix of uncoupled modes is examined step by step. The secondary buckling point that has zero eigen-value of incremental stiffness matrix and the corresponding secondary mode are obtained, moreover, the secondary post-buckling path is traced.

• 한국항해학회지
• /
• 제20권1호
• /
• pp.47-58
• /
• 1996

The use of high tensile steel plates is increasing in the fabrication of ship and offshore structures. The main portion of ship structure is usually composed of stiffened plates. In these structures, plate buckling is one of the most important design criteria and buckling load may usually be obtained as an eigenvalue solution of the governing equations for the plate. To use the high tensile steel plate effectively, its thickness may become thin so that the occurrence of buckling is inevitable and design allowing plate buckling may be necessary. When the panel elastic buckling is allowed, it is necessary to get precise understandings about the post-buckling behaviour of thin plates. It is well known that a thin flat plate undergoes secondary buckling after initial buckling took place and the deflection of the initial buckling mode was developed. From this point of view, this paper discusses the post-buckling behaviour of thin plates under thrust including the secondary buckling phenomenon. Series of elastic large deflection analyses were performed on rectangular plates with aspect ratio 3.6 using the analytical method and the FEM.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 춘계학술발표회
• /
• pp.159-165
• /
• 2003

To Recently, the buckling is easy to happen a thin plate and High Tensile Steel is used at the structure so that it is wide. Especially, the buckling is becoming important design criteria in the ship structure to use especially the High Tensile Steel. Consequently, it is important that we grasp the conduct after the buckling behaviour accurately at the stability of the body of ship structure. In this study, examined closely about conduct and secondary buckling after initial buckling of thin plate structure which receive compressive load according to various kinds aspect ratio under simply supported condition that make by buckling formula in each payment in advance nile to place which is representative construction of hull. Analysis method is F.E.M by ANSYS and complicated nonlinear behaviour to analyze such as secondary buckling.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.732-737
• /
• 2003

Recently, the buckling is easy to happen a thin plate and High Tensile Steel is used at the structure so that it is wide. Especially, the buckling is becoming important design criteria in the ship structure to use especially the High Tensile Steel. Consequently, it is important that we grasp the conduct after the buckling behaviour accurately at the stability of the body of ship structure. In this study, examined closely about conduct and secondary buckling after initial buckling of thin plate structure which receive compressive load according to various kinds aspect ratio under simply supported condition that make by buckling formula in each payment in advance rule to place which is representative construction of hull. Analysis method is F.E.M by ANSYS and complicated nonlinear behaviour to analyze such as secondary buckling.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.496-503
• /
• 2003

Recently, the buckling is easy to happen a thin plate and High Tensile Steel is used at the structure so that it is wide. Especially, the buckling is becoming important design criteria in the ship structure to use especially the High Tensile Steel. Consequently, it is important that we grasp the conduct after the buckling behaviour accurately at the stability of the body of ship structure. In this study, examined closely about conduct and secondary buckling after initial buckling of thin plate structure which receive compressive load according to various kinds aspect ratio under simply supported condition that make by buckling formula in each payment in advance rule to place which is representative construction of hull. Analysis method is F.E.M by ANSYS and complicated nonlinear behaviour to analyze such as secondary buckling.

• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.66-80
• /
• 1996

최근 고장력강(高張力鋼)이 구조물에 폭넓게 사용되고 있어서 판두께가 얇아지고 있다. 판두께가 얇아지므로해서 좌굴(座屈)이 발생하기 쉽다. 그러므로 좌굴(座屈)발생후 판의 거동(擧動)을 정확하게 파악하는 것은 중요하다. 좌굴(座屈) 발생후 2차좌굴(次座屈)이라고 하는 하중하(荷重下)에서는 판(板)의 처짐모드가 갑자기 변한다. 전체구조물의 붕괴강도(崩壞强度)를 고려할 때 2차좌굴(次座屈)은 매우 중요하다. 이런 관점에서 본 연구에서는 면내압축하중(面內壓縮荷重)을 받는 판(板)의 2차좌굴거동(次座屈擧動)에 관하여 연구하였다. 초기처짐을 갖는 판(板)을 대상으로 하여 탄성대변형해석(彈性大變形解析)을 실시하여, 2차좌굴(次座屈)의 영향을 검토하였다. 그 결과로서 다음과 같은 결론(結論)을 얻었다. 즉, 정사각형판은 대칭의 처짐성분은 영향이 있으나 비대칭의 처짐성분은 영향이 전혀 없다. 또한, 종횡비(縱橫比)를 갖는 판(板)은 모든 처짐성분의 영향이 있으며 초기좌굴(初期座屈)후 면내강성(面內剛性)이 계속적으로 감소한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.565-573
• /
• 1999

Hihg Tensile Steel enables to reduce the plate thickness comparing to the case when Mild Steel is used. From the economical view points this is very preferable since the reduction in the hull weight. however to use the High Tensile Steel effectively the plate thickness may become thin so that the occurrence of buckling is inevitable and design allowing plate buckling may be necessary. If the inplane stiffness of the plating decreases due to buckling the flexural rigidity of the cross sect6ion of a ship's hull also decreases. This may lead to excessive deflection of the hull girder under longitudinal bending. In these cases a precise estimation of plate's behavior after buckling is necessary and nonliner analysis of isolated and stiffened plates is required for structural sys-tem analysis. In this connection this paper discusses nonlinear behaviour of thin plate under thrust. Based on the analytical method elastic large deflection analysis of isolated plate is perform and simple expression are derived to evaluated the inplane rigidity of plates subjected to uniaxial compression.

• Structural Engineering and Mechanics
• /
• 제35권5호
• /
• pp.555-570
• /
• 2010

Shallow fixed arches have a nonlinear primary equilibrium path with limit points and an unstable postbuckling equilibrium path, and they may also have bifurcation points at which equilibrium bifurcates from the nonlinear primary path to an unstable secondary equilibrium path. When a shallow fixed arch is subjected to a central step load, the load imparts kinetic energy to the arch and causes the arch to oscillate. When the load is sufficiently large, the oscillation of the arch may reach its unstable equilibrium path and the arch experiences an escaping-motion type of dynamic buckling. Nonlinear dynamic buckling of a two degree-of-freedom arch model is used to establish energy criteria for dynamic buckling of the conservative systems that have unstable primary and/or secondary equilibrium paths and then the energy criteria are applied to the dynamic buckling analysis of shallow fixed arches. The energy approach allows the dynamic buckling load to be determined without needing to solve the equations of motion.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.27-31
• /
• 2003

최근 박판두재인 고장력강이 구조물에 폭넓게 사용됨으로서 좌굴이 발생하기 쉽다. 특히 고장력강을 사용하는 선체구조물에서는 좌굴은 중요한 설계기준이 되고 있다. 따라서 좌굴발생 후 거동을 정확하게 파악하는 것은 선체구조의 안정성에 중요하다. 본 연구에서는 선체의 대표적인 구조물인 판을 대상으로 각 선급 룰에서 좌굴강도식의 기준으로 삼고 있는 단순지지조건에서의 여러 가지 항복강도에 따라 압축하중을 받는 박판구조물의 초기좌굴 후 거동과 2차좌굴 후 거동에 대해서 규명하였다. 해석방법으로는 범용 유한요소해석 프로그램인 ANSYS를 이용하였고 2차좌굴과 같은 복잡한 비선형거동을 해석하기 위하여 호장증분법(Arc-length method)을 사용하였다.

• 한국항해항만학회지
• /
• 제26권1호
• /
• pp.50-54
• /
• 2002

선박은 박판으로 이루어진 상자형구조물이기 때문에 선박이 황천항해를 하게 되면 선체의 상갑판과 선저판에는 호깅이나 새깅이 반복적으로 일어나므로 선테판에는 인장력과 압축력이 반복적으로 작용하게 된다 이 중에서도 압축력이 작용하는 경우가 선박의 종강도상에 치명적인 결과를 가져올 수 있다. 따라서, 본 본문에서는 선체판중에서 종횡비가 1.4인 판을 대상으로 하여 탄소성유한요소해석을 통하여 압축하중을 계속적으로 증가시켜 좌굴과 함께 탄소성대변형거동을 밝힘과 동시에 2차좌굴과 탄소성거동과의 메카니즘을 규명하여 압축하중을 받는 선테판의 탄소성대변형거동을 규명하였다.