• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.3
• /
• pp.239-254
• /
• 2015

Little information on HUmic-Like Substances (HULIS) in ambient particulate matter has been reported yet in Korea. HULIS makes up a significant fraction of the water-soluble organic mass in the atmospheric aerosols and influence their water uptake properties. In this study 24-hr $PM_{2.5}$ samples were collected between December 2013 and October 2014 at an urban site in Gwangju and analyzed for organic carbon (OC), elemental carbon (EC), water-soluble OC (WSOC), HULIS, and ionic species, to investigate possible sources and formation processes of HULIS. HULIS was separated using solid phase extraction method and quantified by total organic carbon analyzer. During the study period, HULIS concentration ranged from 0.19 to $5.65{\mu}gC/m^3$ with an average of $1.83{\pm}1.22{\mu}gC/m^3$, accounting for on average 45% of the WSOC (12~ 73%), with higher in cold season than in warm season. Strong correlation of WSOC with HULIS ($R^2=0.91$) indicates their similar chemical characteristics. On the basis of the relationships between HULIS and a variety of chemical species (EC, $K^+$, $NO_3{^-}$, $SO_4{^{2-}}$, and oxalate), it was postulated that HULIS observed during summer and winter were likely attributed to secondary formation and primary emissions from biomass burning (BB) and traffics. Stronger correlation of HULIS with $K^+$, which is a BB tracer, in winter ($R^2=0.81$) than in summer ($R^2=0.66$), suggests more significant contribution of BB emissions in winter to the observed HULIS. It is interesting to note that BB emissions may also have an influence on the HULIS in summer, but further study using levoglucosan that is a unique organic marker of BB emissions is required during summer. Higher correlation between HULIS and oxalate, which is mainly formed through cloud processing and/or photochemical oxidation processes, was found in the summer ($R^2=0.76$) than in the winter ($R^2=0.63$), reflecting a high fraction of secondary organic aerosol in the summer.

• Journal of Plant Biotechnology
• /
• v.34 no.4
• /
• pp.285-291
• /
• 2007

This study describes conditions for the mass production of activation-tagged mutant hairy root lines of ginseng by cocultivation with Agrobacterium rhizogenes. Because it is not currently possible to produce progeny from transgenic ginseng, a loss-of-function approach for functional genomics cannot be appliable to this species. A gain-of-function approach is alternatively the choice and hairy root production by cocultivation of A. rhizogenes would be most practical to obtain a large number of mutants. Various sources of explants were subjected to genetic transformation with various strains of A. rhizogenes harboring the activation-tagging vector pKH01 to determine optimum conditions for the highest frequency of hairy root formation on explants. Petiole explants cocultivated with A. rhizogenes R1000 produced hairy roots at a frequency of 85.9% after 4 weeks of culture. Conditions for maximum growth or branching rate of hairy roots were also investigated by using various culture media. Petiole explants cultured on half strength Schenk and Hildebrandt medium produced vigorously growing branched roots at a rate of 2.6 after 4 weeks of culture. A total of 1,989 lines of hairy root mutants were established in this study. These hairy root lines will be useful to determine functions of genes for biosynthesis of ginsenosides.

• 한국균학회소식:학술대회논문집
• /
• 2016.05a
• /
• pp.13-13
• /
• 2016

Insects constitute the largest and most diverse group of animals in the world. They also serve as the hosts or nutrient sources for an immense assemblage of pathogens, parasites, and predators. More than 700 fungal species from 100 genera have adopted an entomopathogenic lifestyle. Although entomopathogenic fungi were studied as only biocontrol agents against a variety of pests in various countries, it has been recently focused their additional roles in nature. They are antagonists to/against plant pathogens, endophytes, and possibly even plant growth promoting agents. The potential antimicrobial effect against fungal plant pathogens by an isolate of entomopathogenic fungi including Beauveria bassiana, Lecanicillium spp., and Isaria fumosorosea have been reported since late 1990s, but wasn't reported pathogenicity of the isolate against pests. Later, a Canadian Lecanicillium sp. isolate and L. longisporium isolated from Vertalec$^{(R)}$ showed simultaneous control effect against both aphid and cucumber powder mildew. Therefore, the antimicrobial activities of 342 fungi isolates collected from various regions and conditions in Korea were evaluated against plant pathogenic fungus Botrytis cinerea using dual culture technique on agar plate. As a result, 186 isolates (54.4%) shown the antifungal activity against B. cinerea. The culture filtrates of selected fungi completely suppressed the growth of the microorganisms, indicating that suppression was due to the presence of antimicrobial substances in the culture filtrate. Mode of action of these fungi against insect involves the attachment of conidia to the insect cuticle, followed by germination, cuticle penetration, and internal dissemination throughout the insect. During infection process, secreted enzymes, proteinous toxins, and/or secondary metabolites secreted by entomopathogenic fungi can be used to overcome the host immune system, modify host behavior, and defend host resources. Recently, secondary metabolites isolated from entomopathogenic fungi have been reported as potential bioactive substances. Generally, most of bioactive substances produced by entomopathogenic fungi have reported low molecular weight (lower than 1,000 g/mol) as peptide and, in contrast the high molecular weight fungal bioactive substances are rare. Most substances based on entomopathogenic fungi were shown antimicrobial activity with narrow control ranges. In our study we analyzed the antimicrobial substances having antagonistic effects to B. cinerea. Antimicrobial substances in our fungal culture filtrates showed high thermostability, high stability to proteolytic enzymes, and hydrophilicity and their molecular weights were differed from substance. In conclusion, entomopathogenic fungi showed pathogenicity against insect pests and culture filtrate of the fungi also shown to antimicrobial activity. In the future, we can use the entomopathogenic fungi and its secondary metabolites to control both insect pest control and plant pathogenic fungi simultaneously.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.3
• /
• pp.25-32
• /
• 2022

To understand the distribution characteristics of PM_2.5 concentration in the Saemangeum Reclamation Area and nearby areas, three points of the background area, the occurrence area, and the affected area were selected and samples were collected for each season. The chemical composition was determined. As a result of analyzing the chemical composition contained in PM_2.5, NO₃^- (7.2 ㎍/m³), SO₄^2- (4.3 ㎍/m³), NH₄+ (4.3 ㎍/m³), OC (2.5 ㎍/m³), Si (1.3 ㎍/m³) m³) and EC (0.5 ㎍/m³) seemed to be the main components, and NO₃-, SO₄^2-, NH₄⁺, which are components that form secondary particles, occupied a large proportion. The composition ratio of PM_2.5 was investigated in the order of ion component (56.8%) > Unknown (27.4%) > carbon component (11.8%) > heavy metal component (4.0%). During the PM_2.5 high concentration case days, the ionic component accounted for 90.7% during atmospheric stagnation cases, whereas the chemical composition ratio was in the order of ionic component (51.7%) > heavy metal component (41.5%) > carbon component (6.8%) during yellow dust cases. It was found that the characteristic of PM_2.5 in the Saemangeum reclaimed land and surrounding areas is mainly influenced by outside (domestic and overseas) throughout the year. Ion components accounted for the largest portion of PM_2.5 components in this area, but there were few sources of SOx and NOx emission in the Seamangeum area, which are precursors for secondary particle formation. Therefore, it is judged that most of these are generated and influenced as a secondary reaction in the atmosphere from the outside.

• Microbiology and Biotechnology Letters
• /
• v.32 no.1
• /
• pp.52-59
• /
• 2004

When both fructose and galactose were added to a production medium as carbon sources, the productivity of PAFS (Psedomonas Antifungal Substance) biosynthesized by Pseudomonas aeruginosa was observed to be reduced significantly due to the well-known phenomenon of catabolite repression. In order to overcome this phenomenon by use of fermentation bioprocess, fed-batch cultivation method was examined. In addition, a high producer mutant strain, AP-20 obtained by a rational screening method was tested for its productivity of PAFS in both batch and fed-batch fermentation processes. Notably fed-batch operation showed approximately 4 fold higher PAFS productivity than traditional batch operation process. It was appeared that galactose was utilized principally for the cell growth of Pseudomonas aeruginosa whereas large portion of fructose was used for the biosynthesis of PAFS. Furthermore it was observed that composition and feeding rate of production media should be optimized even in the fed-batch fermentation bioprocess. As an example, very slow feeding of carbon sources gave rather negative effect on the production of PAFS due to significant limitation of carbon and energy sources available for the producer microorganism.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.1
• /
• pp.74-84
• /
• 2024

The study objective was to evaluate the potential production of polyhydroxyalkanoates (PHAs), a biodegradable plastic material, by Paracoccus haeundaensis for which PHA production has never been reported. To identify the most effective nitrogen-limited culture conditions for PHAs production from this bacterium, batch fermentation using glucose concentrations ranging from 4 g l^-1 to 20 g l^-1 with a fixed ammonium concentration of 0.5 g l^-1 was carried out at 30℃ and pH 8.0. A glucose supplement of 12 g l^-1 produced the highest PHA concentration (1.6 g l^-1) and PHA content (0.63 g g ^-1) thereby identifying the optimal condition for PHA production from this bacterium. Gas chromatography-mass spectrometry analysis suggests that P. haeundaensis mostly produced co-polymer types of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] from glucose concentrations at 12 g l^-1 or higher under the nitrogen-limited conditions. When several other single carbon sources were evaluated for the most efficient PHA production, fructose provided the highest biomass (2.8 g l^-1), and PHAs (1.29 g l^-1) concentrations. Results indicated that this bacterium mostly produced the copolymers P(3HB-co-3HV) from single carbon sources composing a range of 93-98% of 3-hydroxybutyrate and 2-7% of 3-hydroxyvalerate, whereas mannose-supplemented conditions produced the only homopolymer type of P(3HB). However, when propionic acid as a secondary carbon source were supplemented into the media, P. haeundaensis produced the copolymer P(3HB-co-3HV), composed of a 50% maximum monomeric unit of 3-hydroxyvaleric acid (3HV). However, as the concentration of propionic acid increased, cell biomass and PHAs concentrations substantially decreased due to cell toxicity.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.141-151
• /
• 2002

The success of sericulture industry in India is mainly attributed to the well-planned annual sericultural activity and the systematic implementation of pest preventive and control measures. The insect spectrum of silkworm and its food plants is complex and plays a major role in limiting the production of silk. Insects cause extensive damage to plant whereas predators and parasites either kill the silkworm larvae or force them to spin flimsy cocoons. Unilateral control measure against this pest is mainly based on the use of synthetic organic insecticides. Though these approaches initially paid rich dividends, the undesirable consequences soon surfaced. Insecticide induced resurgence of gall midges, leafhopper, leaf roller, secondary pest out breaks and development of pest biotypes has led to realization of Integrated Pest Management in sericulture. Various components of IPM, viz. Host plant resistance, cultural practices, biological control, chemical control and integrating them at various technological levels have been studied. Sources of host plant resistance have been identified for some of the major insect pests. High yielding mulberry variety has been propagated and their resistances towards major pests have been recorded. Cultural practices like pruning, pollarding, judicious use of nitrogen, optimum spacing and weed management have preyed to be the powerful tools in containing pests. Natural control over the pest population build- up exerted by the wide range of parasitoids, predators and pathogens has been well documented with identification of natural enemies and studies on their potential. Augmentation, through inoculation or inundative releases of parasitic arthropods, is the most direct way of increasing the numbers of these beneficials in sericulture.

• Environmental Engineering Research
• /
• v.12 no.5
• /
• pp.203-210
• /
• 2007

Since the emissions composition from the household products have potentially been associated with health risks for building occupants, the chemical composition emitted from the products should be surveyed. The current study identified the emission composition for 42 liquid household products, using a purge-and-trap method. This evaluation was done by classifying the household products into five product classes (deodorizers, household cleaners, color removers, pesticides, and polishes). Nineteen compounds were chosen on the basis of selection criteria. The quality control program for purge-and-trap and analytical systems included tests of laboratory blank Tenax traps and blank water samples, and the determination of calibration equation, measurement precision, method detection limit (MDL), and recovery. The number of chemicals varied according to the product categories, ranging from 4 for the product category of bleaches to 12 for the product categories of air fresheners and nail color removers. For all product categories, the emission composition and concentrations varied broadly according to product. It is noteworthy that most household products emit limonene: 19 of 25 cleaning products; 5 of 6 deodorizers; 1 of 3 pesticides; 3 of 3 color removers; and 4 of 5 polishes. It was suggested that the use of household products sold in Korea could elevate the formation of secondary toxic pollutants in indoor environments, by the reaction of limonene with ozone, which entered indoor environments or might be generated by indoor sources such as electronic air cleaning devices and copying machines.

• Journal of Yeungnam Medical Science
• /
• v.20 no.1
• /
• pp.1-12
• /
• 2003

Ischemic stroke is among the principal causes of death and disability in the elderly. Although control of blood pressure, decreased cigarette smoking, and modified dietary habits are among important reasons for stroke decline, the use of antithrombotic therapy, rigorously prescribed. Several antiplatelet agents are approved to reduce the risk of recurrent stroke. Aspirin is the best-studied and most widely used antiplatelet agent for stroke prevention; it provides approximately 15% to 25% relatively risk reduction for secondary prevention of stroke or the major vascular death. Combining 2 antiplatelet agents with different mechanism of action was demonstrated to provide a substantial increase in efficacy in several studies. Anticoagulation should be considered first with potential cardiac sources of embolism. Heparin reduces development of erythrocyte-fibrin thrombi that form in regions of vascular stasis especially within the heart, in severely stenosed arteries sometimes engrafted on white thrombi, in acute arterial occlusion. Heparin should not be indiscriminately given to all acute brain ischemia patients, but may contribute to treatment of large artery occlusion and severe stenosis, cardiogenic embolism with a high acute recurrence risk, and dural sinus and cerebral venous thromobosis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.489-494
• /
• 2013

In analysis of power transformer loss using calculation of magnetic field, Finite element method is commonly used. When using this method, calculation of magnetic field needs the very large number of elements and the performance of common work station is not sufficient to calculate the magnetic fields. In addition, the definition of boundary conditions may arise. However, When using Integral equation method, only ferromagnetic materials need to be modeled, since the domain is infinite. All the space in which the primary and secondary sources exist is regarded as free(${\mu}={\mu}_0$).