• 대한환경공학회지
• /
• 제32권12호
• /
• pp.1134-1140
• /
• 2010

미량오염물질의 산화 및 대체 소독제로 각광받는 오존처리의 하수 2차 처리수중에 잔류하는 의약품류에 대한 제거 성능을 검토하였다. 또한, 의약품류의 제거를 목적으로 한 오존처리에 의한 미생물의 불활성화에 대하여 고찰하였다. 본 연구에서는 시험수로써 하수 2차 처리수를 이용하였으며, 오존처리는 2 mg/L, 4 mg/L, 6 mg/L의 오존 주입량으로 행하였다. 오존처리에 의해 시험수중에서 검출된 37종의 의약품류를 효과적으로 제거하기 위해서는 6 mg/L의 오존 주입량 (오존 소비량 : 4.4 mg/L)이 요구되었다. 동일한 오존처리 조건하에서는 대장균군 및 enteroviruses에 대해 약 3 log의 불활성화가 달성가능할 것으로 고찰되어, 잔류 의약품류의 제거 뿐만 아니라 병원성 미생물에 대해서도 효과적인 소독효과를 달성할 수 있을 것으로 판단되었다. 반면, 6 mg/L의 오존 주입량을 이용한 오존처리시, 처리수중의 용존오존농도가 약 1.8 mg/L까지 증가하여, 발암성 물질인 브로메이트의 생성가능성이 높아질 것으로 예상되었다. 이러한 브로메이트의 생성을 억제하기 위해서는 오존처리와 UV 또는 $H_2O_2$와의 조합공정인 고도산화처리공정에 대한 검토가 필요할 것으로 판단되었다.

• 융합정보논문지
• /
• 제11권9호
• /
• pp.109-114
• /
• 2021

유기공업 화학에서 알코올류의 산화제에 대해 연구가 많이 진행 되고 있으며, 그중에서도 크롬(VI)-계열의 시약들이 산화제로 널리 이용되어 왔다. 그리고 일차알코올을 알데히드로만 산화시키는 산화제와 메카니즘 규명이 필요하게 되었다. 이러한 연구의 일환으로 본 연구에서는 퀴놀린과 chromium(VI) trioxide을 반응시켜 크롬(VI)-퀴놀린 화합물[(C₉H₇NH)₂Cr₂O₇]을 합성하여, FT-IR 및 원소분석에서 구조를 확인하였다. 여러 가지 유기용매를 사용하여 크롬(VI)-퀴놀린 화합물에 의한 벤질 알코올의 산화반응은 유전상수 값이 큰 유기용매인 N,N'-dimethylformamide에서 높은 산화반응성을 보였다. N,N'-dimethylformamide 용매를 사용하여 크롬(VI)-퀴놀린 화합물은 치환 벤질 알코올류를 효율적으로 산화시켰고, Hammett 반응상수(ρ)=-0.69(303 K) 이였다. 본 실험에서 알코올의 산화반응 과정은 chromate ester 형성과정과, 속도결정단계에서 수소화 전이가 일어나는 반응경로임을 알 수 있었다. 결과적으로 크롬(VI)-퀴놀린 화합물은 벤질알코올, 알릴알코올, 일차알코올 및 이차알코올류를 알데히드나 케톤으로 전환시키는 효율적인 산화제로, 이차알코올류 존재 하에서 벤질알코올, 알릴알코올, 일차알코올의 선택적인 산화제로 사용할 수 있다.

• 자원환경지질
• /
• 제40권4호
• /
• pp.375-387
• /
• 2007

국보 제11호 익산미륵사지석탑은 현재 문화유산의 원형보존을 위하여 해체복원 중이다. 이 석탑의 구성암석은 비교적 풍화에 강한 화강암으로 이루어져 있으나 오랜 세월 동안 대기환경에 노출되면서 다양한 형태의 오염물이 피복되어 원암의 색상을 잃었다. 이 연구에서는 이차적 무기오염물을 성인적 유형으로 세분하고, 육안으로 확연히 판별되는 산화 변색된 부재만을 엄선하여 오염물질의 산출상태 및 오염종을 정량분석 하였다. 또한 용해실험을 통해 가용성 오염종의 지구화학적 거동특성을 규명하고 세정방법 및 효과 등을 분석하여, 표면 세정제의 보존과학적 적용가능성을 검토하였다.

• 한국대기환경학회지
• /
• 제27권2호
• /
• pp.168-180
• /
• 2011

The variation of the physicochemical properties of atmospheric aerosols in coexistence of the heavy Asian Dust and Haze observed from $15^{th}$ to $17^{th}$ March 2009 in Seoul was scrutinized through the mass and ion concentration observations and synoptic weather analysis. Although the ratio of PM1.0/PM10 was constant at 0.3 (which is typical during Asian Dust period in Korea) during the measurement period, both PM10 and PM1.0 mass concentrations were 3~6 times and 2~4 times higher than that of clear days, respectively. Water-soluble ion components accounted for 30~50% of PM10 and 50~70% of PM1.0 mass concentration. One of the secondary pollutants, $NO_3^-$ was found to be associated with $Ca^{2+}$ and $Na^+$ in coarse mode indicating that the aerosol derived from natural source was affected by anthropogenic pollutants. While the acidity of the aerosols increased in fine mode when the stagnation of weather patterns was the strongest (March $16^{th}$), the alkalinity increased in coarse mode when new air masses arrived with a southwestern wind after ending a period of stagnation (March $17^{th}$). In the selected case, SOR (Sulfur Oxidation Ratio, $nSO_4^{2-}/[nSO_4^{2-}+nSO_2]$) and NOR (Nitrogen Oxidation Ratio, $nNO_3^-/[nNO_3^-+nNO_2]$) values of ion components were higher than the general values during Asian Dust period. These results imply that dust aerosols could be mixed with pollutants transported from China even in heavy Asian Dust cases in Korea.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.30.1-30.1
• /
• 2011

Silicon is one of useful materials in various industry such as semiconductor, solar cell, and secondary battery. The metallic silicon produces generally melting process for ingot type or chemical vapor deposition (CVD) for thin film type. However, these methods have disadvantages of high cost, complicated process, and consumption of much energy. Electrodeposition has been known as a powerful synthesis method for obtaining metallic species by relatively simple operation with current and voltage control. Unfortunately, the electrodeposition of the silicon is impossible in aqueous electrolyte solution due to its low oxidation-reduction equilibrium potential. Ionic liquids are simply defined as ionic melts with a melting point below $100^{\circ}C$. Characteristics of the ionic liquids are high ionic conductivities, low vapour pressures, chemical stability, and wide electrochemical windows. The ionic liquids enable the electrochemically active elements, such as silicon, titanium, and aluminum, to be reduced to their metallic states without vigorous hydrogen gas evolution. In this study, the electrodeposion of silicon has been investigated in ionic liquid of 1-butyl-3-methylpyrolidinium bis (trifluoromethylsulfonyl) imide ([bmpy]$Tf_2N$) saturated with $SiCl_4$ at room temperature. Also, the effect of electrode materials on the electrodeposition and morphological characteristics of the silicon electrodeposited were analyzed The silicon electrodeposited on gold substrate was composed of the metallic Si with single crystalline size between 100~200nm. The silicon content by XPS analysis was detected in 31.3 wt% and the others were oxygen, gold, and carbon. The oxygen was detected much in edge area of th electrode due to $SiO_2$ from a partial oxidation of the metallic Si.

• 폴리머
• /
• 제31권4호
• /
• pp.278-282
• /
• 2007

컴퓨터 하드디스크 윤활제로 사용되고 있는 perfluoropolyether(PFPE)의 다양한 분해 거동을 살펴보았다. PFPE의 열분해는 $170\;^{\circ}C$에서 시작하여 $450\;^{\circ}C$에서 완전 분해가 일어나며 마모된 하드디스크 슬라이드의 재질인 $Al_2O_3{\cdot}TiC$가 윤활제와 접촉하는 경우, Lewis acid 촉매분해에 의하여 주사슬의 methylene oxide(fluoride)의 절단에 의한 급격한 분해반응과 methylene(fluoride)와 hydroxy 말단기의 열분해로 인하여 $300\;^{\circ}C$에서 분해가 완료됨을 확인하였다. PFPE에 UV가 조사되면 광 분해 영향으로 Lewis acid 촉매분해와는 달리 methylene oxide (fluoride)의 절단 보다는 methylene(fluoride)와 말단기의 절단이 더 촉진되며 이때 생성된 라디칼의 2차 반응에 의한 chain extension에 의하여 PFPE의 분자량이 증가됨을 확인하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.39-39
• /
• 2017

In Asia, sweet potato (Ipomoea batatas) is a very important crop for starch production. Approximately 74.3% of the total sweet potato production quantity is produced in Asia (FAO, 2014) and China is the largest producer of sweet potato. Post-harvest management is particularly important because it is difficult to maintain the quality as well as quantity of sweet potatoes. Despite the importance of post-harvest management, researches on sweet potato have been focused on production-related study such as breeding of new variety, improved techniques of cultivation, so there is limited research on storage after harvest. Curing is a normal practice after sweet potato harvest to promote wound healing and extend postharvest storage life. In Korea, harvested sweet potatoes are usually cured for 4 to 7 days at $30-33^{\circ}C$ and 80-95% relative humidity within one week. Since the optimum storage temperature of sweet potato is regarded as $15-20^{\circ}C$, additional facilities and costs are required to raise the temperature for curing. However, the majority of small farmers do not have the capacity to provide additional facilities and costs. This study was initiated to suggest a new curing method to accelerate the wound healing by applying chemical oxidation to the wound surface of sweet potato. Oxidative stress is known to play an important role in the synthesis of secondary metabolites including lignin. In addition, chemical oxidation can be applied to prevent spoilage caused by microorganisms. Powerful gaseous oxidant with excellent penetration ability and superior sterilization effect was selected for this study. Lignification, weight loss, and spoilage rate of artificially wounded sweet potatoes were investigated after oxidant fumigation. There were clear differences in morphological analysis such as lignification pattern, lignin deposition color, and continuity of lignified cell layers between oxidant-fumigated sweet potatoes and control. These results show that gaseous oxidant can be used to supplement or replace the curing practice, to improve shelf-life as well as curing cost reduction.

• The Korean Journal of Physiology and Pharmacology
• /
• 제7권3호
• /
• pp.157-162
• /
• 2003

Our earlier studies found a significant correlation between the activities of ranitidine N-oxidation catalyzed by hepatic flavin-containing monooxygenase (FMO) and the presence of mutations in exon 4 (E158K) and exon 7 (E308G) of the FMO3 gene in Korean volunteers. However, caffeine N-1 demethylation (which is also partially catalyzed by FMO) was not significantly correlated with these FMO3 mutations. In this study, we examined another common mutation (V257M) in exon 6 of FMO3 gene. The V257M variant, which is caused by a point mutation (G769A), was commonly observed (13.21% allele frequency) in our subjects (n=159). This point mutation causes a substitution of $Val^{257}$ to $Met^{257}$, with transformation of the secondary structure. The presence of this mutant allele correlated significantly with a reduction in caffeine N-1-demethylating activity, but was not correlated with the activity of N-oxidation of ranitidine. In a family study, the low FMO activity observed in a person heterozygous for a nonsense mutation in exon 4 (G148X) and heterozygous for missense mutation in exon 6 (V257M) of FMO3 was attributed to the mutations. Our results suggest that various point mutations in the coding regions of FMO3 may influence FMO3 activity according to the probe substrates of varying chemical structure that correlate with each mutation on the FMO3 gene.

• 한국진공학회지
• /
• 제2권2호
• /
• pp.181-187
• /
• 1993

Si 이방성 에칭 용액인 EPW(Ethylenediamine, Pyrocatechol, Water) 용액내에서 potentiostat를 이용한 cyclic polarization 방법으로 양극 산화막의 연구를 수행하였다. p-Si 및 n-Si에서 양극 산화막의 breakdown potential은 동일한 값을 보였으며, $p^+$-Si의 경우에는 양극 산화막의 breakdown이 일어나지 않았다. 산화막의 XPS 분석결과 n-Si과 p-Si의 경우 Si 2p photopeak의 chemical shift는 각각 ${\Delta}$3.62eV, ${\Delta}$3.55eV였으며, $p^+$-Si의 경우에는 ${\Delta}$4.25eV였다. 따라서 $p^+$-Si의 양극 산화막이 light doping의 경우와 비교하여 커다란 에칭 저항성을 보이는 것은 산화막의 화학적 조성차이에 기인하는 것이라 생각된다. $p^+$-Si이 에칭 용액내에서 anodic bias 상태에 농이게 되면 boron이 표면으로 diffuse-out되는 것을 SIMS 분석을 통해 알 수 있었는데, 그 원인은 아직 분명하지는 않지만, 이것은 실제 etch-stop이 일어나는 임계 boron 농도가 일반적으로 알려진 값보다 훨씬 높을 것이라는 것을 시사한다.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.