• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.4
• /
• pp.179-187
• /
• 2020

Seismic qualification of equipment including piping is performed by using floor response spectra (FRS) or in-structure response spectra (ISRS) as the earthquake input at the base of the equipment. The amplitude of the FRS may be noticeably reduced when obtained from coupling analysis because of interaction between the primary structure and the equipment. This paper introduces a method using a modal synthesis approach to generate the FRS in a coupled primary-secondary system that can avoid numerical instabilities or inaccuracies. The FRS were generated by considering the dynamic interaction that can occur at the interface between the supporting structure and the equipment. This study performed a numerical example analysis using a typical nuclear structure to investigate the coupling effect when generating the FRS. The study results show that the coupling analysis dominantly reduces the FRS and yields rational results. The modal synthesis approach is very practical to implement because it requires information on only a small number of dynamic characteristics of the primary and the secondary systems such as frequencies, modal participation factors, and mode shape ordinates at the locations where the FRS needs to be generated.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.7 no.1
• /
• pp.9-15
• /
• 1977

The author observed the effect of X-ray irradiation on the secondary palate formation of the rat fetuses. The mothers were exposed to X-radiation on the 10½th, 11½th and 12½th day of gestation with respectively 150, 200, 250, 300 and 350 rads. The fetuses were removed from mothers on 15½h, 16½th and 18½th day of gestation. Morphological changes in palate formation were examined and histochemical preparations were made. 1. In control fetuses, the secondary palates were fully developed on the 15½th to 18½th day of gestation. But in experimental fetuses, many cleft palates were observed in accordance with increase of X-radiation dose. 2. Frequency of incidence of horizontal position of both palated shelves in cleft palate was highest. 3. Accordig to the dislocation of palatal processes, the stain ability of palatal crest was varied. 4. The thickened area of palatal epithelium of palatal crest showed intense methyl green-pyronin and PAS reaction 5. Mesenchymal cell condensation was appeared under the thickened epithelium of palatal process and this mesenchymal tissue showed strong colloidal iron reaction. 6. The stain ability of alizarin red S and alkaline phosphatase reaction of tectal ridge were decreased, in accordance with increase of irradiation doses.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.67-72
• /
• 2002

Today, the research to examine a fact that interaction between the air and the fluid free surface affects the steady state flow and air. We proved the interaction between vortex pairs and free surface on each condition that is created by the end of delta wings. another purpose of this study is to investigate the effect of surface active material which can change the surface tension and we must consider when we refer to turbulent flow on surface tension. therefore, this research examined the growth process of vortex pairs on condition of clean, contaminated free surface and wall after we made vortex pairs through counter rotating flaps. The results of this study suggest that vortex pairs in clean free surface rise safely but the vortex pairs in contaminated free surface and rigid, no slip is made secondary vortex or rebounding. However the secondary vortex in rigid, no slip is stronger than before, and we can find the vortex shape which roll up more completely. However, these will disappear by the effect of wall.

• Restorative Dentistry and Endodontics
• /
• v.12 no.2
• /
• pp.73-80
• /
• 1987

The present study was designed to help elucidate the effect of glass ionomer cements on the exposed dental pulp by means of histologic examination. A total of 40 cavities of class V were prepared on the teeth of 4 dogs with exposure of 1mm in diameter on the bases of them. 20 cavities were filled with glass ionomer cement as the experimental group and the other 20 cavities were filled with zinc oxide eugenol cement as the control group. The dogs were sacrificed at one, two, three, and four weeks after filling, and the specimens were routinely prepared and stained with Hematoxylin-Eosin. The obtained microscopic findings were as follows: Inflammatory cell infiltrations were observed in control in 1 week, which decreased markedly with time. In all control groups, hemorrhage around exposed pulp tissue and coagulation change of pulp were observed. Secondary dentin formation and thickened predentin were observed in 4 week cases, and the recovery of pulp tissue was favorable on the whole. Inflammatory cell infiltration was observed in all GIC groups. Proliferation of blood vessel and congestion were observed with coagulation changes around the exposed pulp tissue. Secondary dentin formation and thickened predentin were observed in 3 weeks. In the experimental 4 week case, secondary dentin formation was evident. On the whole, pulpal irritation of glass ionomer cement was relatively severe. Recovery of pulp tissue in GIC groups was less favorable compared with that of ZOE groups.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.301-304
• /
• 2014

This paper proposes accurate interference probability and bit error rate formulas for cognitive relay networks with underlay spectrum sharing and channel estimation error (CEE). Numerous results reveal that the CEE not only degrades the performance of secondary systems (SSs) but also increases interference power caused by SSs to primary systems (PSs), eventually unfavorable to both systems. A solution to further protect PSs from this effect through reducing the power of secondary transmitters is investigated and analyzed.

• Journal of the Korean Magnetic Resonance Society
• /
• v.8 no.2
• /
• pp.115-126
• /
• 2004

Four secondary metabolites from an unidentified tunicate were isolated by treatment with trichloroethyl chloroformate(TECF) or acetic anhydride in pyridine. Their structures were determined by an extensive NMR analysis and the configuration of diacetyl derivatives(3a, 4a) was assigned by comparing with NMR data of a similar compound. Three new naturally occurring compounds (1, 3, 4) showed potent brine shrimp lethality and antifungal effect against Candia albicans.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.125.2-125.2
• /
• 2003

Hepatic ischemia and reperfusion predisposes the liver to secondary stresses such as endotoxemia possibly via dysregulation of the hepatic microcirculation secondary to imbalanced regulation of vascular stress gene. In this study, we determined the effect of endotoxin on hepatic vasoregulatory gene expression in response to hepatic ischemia and reperfusion (I/R). Rats were subjected to 90 min of hepatic ischemia and 6 h of reperfusion. Lipopolysaccharide (LPS, 1 mg/kg) was injected intraperitoneally after reperfusion. (omitted)

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.7
• /
• pp.51-57
• /
• 2009

In this paper, we studied on an attenuation effect of automobile exhaust noise according to the direction of canceling speaker in duct-acoustic ANC system. Automobile exhaust noise was recorded at 800rpm, 3500rpm and 5000rpm of a diesel engine. Directions of canceling speaker can be set to $30^{\circ}$, $90^{\circ}$ and $150^{\circ}$ against the primary noise flow by acrylic ducts to be made for the experimentation. DSP board used to control the ANC system. The algorithm of this ANC system applied the Filtered-x-LMS algorithm that is modified to compensate for a property of DSP input signal and the secondary-path effect. As an experiment result, the direction of canceling speaker was proved to influence the reduction effect of noise. The $150^{\circ}$ duct in the attenuation effect of noise showed a better result than the $90^{\circ}$ or $30^{\circ}$ duct.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.337-348
• /
• 2023

Shear wall is commonly used as a lateral force resisting system of concrete mid-rise and high-rise buildings, but it brings challenges in providing relatively large space throughout the building height. For this reason, the structure system where the upper structure with bearing, non-bearing and/or shear walls that sits on top of a transfer plate system supported by widely spaced columns at the lower stories is preferred in some regions, particularly in low to moderate seismic regions in Asia. A thick reinforced concrete (RC) plate has often been used as a transfer system, along with RC transfer girders; however, the RC plate becomes very thick for tall buildings. Applying the post-tensioning (PT) technique to RC plates can effectively reduce the thickness and reinforcement as an economical design method. Currently, a simplified model is used for numerical modeling of PT transfer plate, which does not consider the interaction of the plate and the upper structure. To observe the actual behavior of PT transfer plate under seismic loads, it is necessary to model whole parts of the structure and tendons to precisely include the interaction and the secondary effect of PT tendons in the results. This research evaluated the seismic behavior of shear wall-type residential buildings with PT transfer plates for the condition that PT tendons are included or excluded in the modeling. Three-dimensional finite element models were developed, which includes prestressing tendon elements, and response spectrum analyses were carried out to evaluate seismic forces. Two buildings with flat-shape and L-shape plans were considered, and design forces of shear walls and transfer columns for a system with and without PT tendons were compared. The results showed that, in some cases, excluding PT tendons from the model leads to an unrealistic estimation of the demands for shear walls sit on transfer plate and transfer columns due to excluding the secondary effect of PT tendons. Based on the results, generally, the secondary effect reduces shear force demand and axial-flexural demands of transfer columns but increases the shear force demand of shear walls. The results of this study suggested that, in addition to the effect of PT on the resistance of transfer plate, it is necessary to include PT tendons in the modeling to consider its effect on force demand.

• Korean Journal of Social Welfare Studies
• /
• v.49 no.1
• /
• pp.109-132
• /
• 2018

This study investigated the impact of the secondary trauma stress experienced by workers who support sexual violence victims on occupational stress level, and verified the moderating effect of the job education from support facilities in this relationship. The data analyzed in this study were sampled from "The Primary Study on The Development of Training Program to Cultivate Professional Workers of Support Organizations for Sexual Violence Survivors" as a secondary data and 482 nationwide workers were selected. By applying SPSS PROCESS macro, the moderation model was analyzed. The analysis results are as follows. First, sexual violence victim support workers' secondary trauma stress has a significantly influence on occupational stress level of workers. Second, the job education from support agencies themselves moderates the relationship between the secondary trauma stress and occupational stress level of support agents. It also showed that the higher level of job education participates, the less the experience of being stressed on the job. Thus, on the basis of the result, the theoretical discussion on the secondary trauma stress and occupational stress level of sexual violence victim support worker was drawn out and the empirical implication on the direction of the education for job related was suggested.