• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1680-1688
• /
• 2017

In this study, analysis is performed on entropy generation during cilia transport of water based titanium dioxide nanoparticles in the presence of viscous dissipation. Moreover, thermal heat flux is considered at the surface of a channel with ciliated walls. Mathematical formulation is constructed in the form of nonlinear partial differential equations. Making use of suitable variables, the set of partial differential equations is reduced to coupled nonlinear ordinary differential equations. Closed form exact solutions are obtained for velocity, temperature, and pressure gradient. Graphical illustrations for emerging flow parameters, such as Hartmann number (Ha), Brinkmann number (Br), radiation parameter (Rn), and flow rate, have been prepared in order to capture the physical behavior of these parameters. The main goal (i.e., the minimizing of entropy generation) of the second law of thermodynamics can be achieved by decreasing the magnitude of Br, Ha and ${\Lambda}$ parameters.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.45-52
• /
• 2003

A finite element procedure to estimate ultimate strength of space frames considering spread of plasticity is presented. The improved displacement field is introduced based on inclusion of second order terms of finite rotations. All the nonlinear terms due to bending and torsional moment as well as axial force are precisely considered. The concept of plastic hinge is introduced and the incremental load/displacement method is applied for the elasto-plastic analysis. The initial yield surface is defined based on the residual stress and the full plastification surface is considered under the combined action of axial force, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for ultimate strength of space frames are compared with available solutions and experimental results.

• 설비공학논문집
• /
• 제12권3호
• /
• pp.284-291
• /
• 2000

A basic pulse tube refrigerator has been constructed with extensive instrumentation to study the characteristics of the heat exchanger experimentally under the oscillating pressure and the oscillating flow. This paper describes the sequential experiments with the basic pulse tube refrigerator. The experiments were performed for various cycle frequencies under the square pressure wave forms. First, the heat flux was measured through the cycle at the both cold and warm end heat exchangers without the regenerator. In order to enhance the thermal communication capability of the heat exchanger with the gas at low operating frequencies, a unique design of the triangular shape radial fin concept was applied to the heat exchangers. For the fin heat exchanger, the measured heat flux and the calculated heat flux from the two well-known oscillating heat transfer correlations were compared and discussed. Second, the regenerator was added to the pulse tube to make a basic pulse tube refrigerator configuration. The experiment showed the great impact of the regenerator on the temperature and the heat flux profiles. At the warm-end, the cyclic averaged heat flux had its maximum value at the specific operating frequency. The paper presents the explanation of the surface heat pumping effect as well as the experimental data.

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.23-35
• /
• 2021

A POM-membrane was fabricated by immobilizing a keggin type polyoxometalate (POM) H5PV2Mo10O40 onto the surface of microporous flat-sheet polymeric polyvinylidene fluoride (PVFD) membrane using a chemical deposition method. The POM-membrane was characterized by FT-IR, SEM and EDX to confirm existing of the POM onto the membrane surface. The POM-membrane was used to remove an anionic textile dye (Reactive Black 5 named as an RB5) from aqueous phases with a cross-flow membrane filtration and a batch adsorption system. The dye removal efficiency of the POM-membrane using the cross-flow membrane filtration system and the batch adsorption system was about 88% and 98%, respectively. The influence factors such as contact time, adsorbent dosage, pH, and initial dye concentration were investigated to understand the adsorption mechanism of the RB5 dye onto the POM-membrane. To find the best fitting isotherm model, Langmuir, Freundlich, BET and Harkins-Jura isotherm models were used to analyze the experimental data. The isotherm analysis showed that the Langmuir isotherm model was found to the best fit for the adsorption data (R2 = 0.9982, qmax = 24.87 mg/g). Also, adsorption kinetic models showed the pseudo second order kinetic model was found the best model to fit the experimental data (R2 = 0.9989, q = 8.29 mg/g, C0 = 15 ppm). Moreover, after four times regeneration with HNO3 acid, the POM-membrane showed high regenerability without losing dye adsorption capacity.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.347-349
• /
• 1997

In this study, we designed a vascular occlusion device based on the principle that slowing blood flow would induce thrombosis. Tungsten, stainless steel and platinum were tested for finding a good embolic metallic coil. The primary coil and the second coil were done with heat treatment or different time. The pitch distance and the shape retention capability of second coil were characterized by SEM. To increase thrombogenicity, we tried to treat different proteins on steel coils: thrombin, gelatin and both gelatin and thrombin. To verify protein materials treated on coils, the surface of coil treated with different proteins were characterized using Laser Raman Spectrophotometer. After observation of embolic coils, the peptides bonds on theirs' surface were found. In order to compare the thrombogenicity of different embolic agents, we measured whole blood clotting time.

• 한국수자원학회논문집
• /
• 제48권4호
• /
• pp.281-290
• /
• 2015

표준 k-${\varepsilon}$, RNG k-${\omega}$ 그리고 k-${\omega}$ SST 난류 모형과 VOF (volume of fluid)기법을 이용하여 사각형 광정위어를 통과하는 난류 흐름의 수면 변화와 유속분포를 수치모의 하였다. 지배방정식은 2차 정확도의 유한체적기법을 이용하여 해석하였으며, 두 개의 서로 다른 격자해상도에서 계산을 수행하여 수치해석 결과의 격자 민감도를 분석하였다. 계산 결과를 Kirkgoz et al. (2008)의 실험 결과 그리고 Moss (1972) 및 Zachoval et al. (2012) 무차원화된 실험값과 비교 분석하여 적용한 수치모형의 정확도를 평가하였다. 수치모의 결과는 사각형 개수로에 설치된 광정위어 흐름의 실험결과들을 합리적으로 예측하고 있으면 적용한 난류모형에 따라서 두 개의 주요 흐름분리 영역에서 계산 결과에 차이가 있는 것으로 나타났다. 표준 k-${\varepsilon}$ 모형은 이들 두 개의 흐름분리영역의 크기를 과소산정하고 있으며, k-${\omega}$ SST 모형은 위어 전면부에서 발생하는 흐름분리 영역을 다소 과대 산정하는 것으로 나타났다. RNG k-${\varepsilon}$ 모형은 전반적으로 양호하게 두 흐름분리 영역을 예측하는 한편, k-${\omega}$ SST 모형은 위어 상류부 모서리에서 발생하는 박리거품의 발생 형태를 가장 잘 예측하는 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.21-28
• /
• 2000

Although commercial PIV systems have been widely used for the non-intrusive velocity field measurement of fluid flows, they are still under development and have considerable room for improvement. In this study, a single-frame double-exposure PIV system using a high-resolution CCD camera was developed. A pulsed Nd:Yag laser and high-resolution CCD camera were synchronized by a home-made control circuit. In order to resolve the directional ambiguity problem encountered in the single-frame PIV technique, the second particle image was genuinely shifted in the CCD sensor array during the time interval dt. The velocity vector field was determined by calculating the displacement vector at each interrogation window using cross-correlation with 50% overlapping. In order to check the effect of spatial resolution of CCD camera on the accuracy of PIV velocity field measurement, the developed PIV system with three different resolution modes of the CCD camera (512 ${\times}$ 512, lK ${\times}$ IK, 2K ${\times}$ 2K) was applied to a turbulent flow which simulate the Zn plating process of a steel strip. The experimental model consists of a snout and a moving belt. Aluminum flakes about $1{\mu}m$ diameter were used as scattering particles for the liquid flow in the zinc pot and the gas flow above the zinc surface was seeded with atomized olive oil with an average diameter of 1-$3{\mu}m$. Velocity field measurements were carried out at the strip speed $V_s$=1.0 m/s. The 2K ${\times}$ 2K high-resolution PIV technique was significantly superior compared to the smaller pixel resolution PIV system. For the cases of 512 ${\times}$ 512 and 1K ${\times}$ 1K pixel resolution PIV system, it was difficult to get accurate flow structure of viscous flow near the wall and small vortex structure in the region of large velocity gradient.

• 한국전산유체공학회지
• /
• 제3권1호
• /
• pp.11-21
• /
• 1998

A vorticity-based method for the numerical solution of the two-dimensional incompressible Navier-Stokes equations is presented. The governing equations for vorticity, velocity and pressure variables are expressed in an integro-differential form. The global coupling between the vorticity and the pressure boundary conditions is fully considered in an iterative procedure when numerical schemes are employed. The finite volume method of the second order TVD scheme is implemented to integrate the vorticity transport equation with the dynamic vorticity boundary condition. The velocity field is obtained by using the Biot-Savart integral. The Green's scalar identity is used to solve the total pressure in an integral approach similar to the surface panel methods which have been well established for potential flow analysis. The present formulation is validated by comparison with data from the literature for the two-dimensional cavity flow driven by shear in a square cavity. We take two types of the cavity now: (ⅰ) driven by non-uniform shear on top lid and body forces for which the exact solution exists, and (ⅱ) driven only by uniform shear (of the classical type).

• 대한소아치과학회지
• /
• 제34권2호
• /
• pp.273-284
• /
• 2007

본 연구는 광중합형 복합레진 Composan LCM Flow(Promedica, Germany), Clearfil ST(Kuraray medical, Japan) Durafil VS(Heraeus Kulzer, U.S.A), Point 4(Kerr, U.S.A)를 사용하여 각 제품의 물리적, 화학적 평가를 하고자 하였다. 마모시험 후 마모된 면의 깊이를 측정하였고 0.1N NaOH에 보관 후. 각 제품의 분해저항성을 무게손실, 표면하 분해층 깊이, 용출된 Si 농도를 기준으로 평가하였으며 주사전자현미경과 공촛점 레이저 현미경으로 분해 층을 관찰하여 다음과 같은 결과를 얻었다. 1. 무게 손실량은 $1.02{\sim}6.04%$까지 다양하였으며 Durafil VS에서 가장 높았다$(6.04{\pm}0.29%)$. 2. 분해층 깊이는 Durafil VS이 가장 깊었고 Clearfil ST, Point 4, Composan LCM Flow순이었고 Point 4와 Composan LCM Flow는 다른 제품과 유의한 차이를 보였다(p<0.001). 3. Si 용출량은 Clearfil ST가 가장 많았으며 Durafil VS, Composan LCM Flow, Point 4 사이에 유의한 차이를 보였다(p<0.001). 4. 주사전자현미경 관찰시 표면 양상 및 분해층 깊이를 관찰할 수 있었고 공촛점 레이저 현미경 관찰시 NaOH 용액에 보관한 후 수복재의 기질과 충전제 사이의 결합의 파괴 양상을 관찰할 수 있었다. 5. 최대마모깊이는 Durafil VS, Composan LCM Flow, Point 4, Clearfil ST 순으로 낮았으며 유의한 차이를 보이지 않았다(p>0.001). 6. 각 제품의 Si 용출량과 분해층 깊이 사이(r=0.892, p<0.01), Si 용출량과 무게손실 사이(r=0.736, p<0.01)에는 유의한 상관관계를 보였다.

• 한국수자원학회논문집
• /
• 제50권2호
• /
• pp.89-97
• /
• 2017

만곡수로에서의 흐름 구조는 나선형 운동을 갖는 이차 재순환 흐름 그리고 만곡부 측벽으로부터 발생하는 흐름분리로 인한 전단층 등으로 복잡하다. 이 연구에서는 3개의 통계학적 난류모형($k-{\varepsilon}$, RNG $k-{\varepsilon}$, $k-{\omega}$ SST) 그리고 자유수면 변동 해석을 위한 VOF 기법을 적용한 비정상 Reynolds-averaged Navier-Stokes (RANS) 계산을 수행하여 고진폭 만곡수로인 키노시타(Kinoshita) 수로에서의 이차류와 편수위를 해석하였다. 2차 정확도의 유한체적법을 이용하여 구한 해석결과를 기존 수리실험 자료와 비교하여 각 난류모형의 적용성을 평가하였다. 비정상 RANS 계산에서 적용한 3개의 통계학적 난류모형의 해석 결과를 분석해 보면 키노시타 수로에서 발생하는 만곡부 편수위는 3개 모형 모두 유사하게 모의하는 한편, 전반적인 이차류 분포는 $k-{\omega}$ SST상대적으로 잘 모의하는 것으로 나타났다. 하류에 위치한 만곡부 흐름에 영향을 미쳐 국부적으로 발생한 이차류와 이전의 만곡부 중앙 수면 부근에서 발생하는 한 쌍의 이차 와류가 존재하는 현상을 관측하였으며, $k-{\omega}$ SST 난류모형은 이러한 복잡한 와류 변화를 양호하게 모의했다. $k-{\varepsilon}$ 모형을 기반으로 개발된 두 모형으로 모의한 결과에서는 실험에서 관측된 중앙 만곡부에 존재하는 두 개의 이차류 중, 시계방향 와류가 재현되지 않는다. VOF기법을 이용해서 계산한 만곡부에서의 편수위 해석결과는 적용한 모든 난류모형에 대해서 전반적으로 실험값을 양호하게 재현하는 것으로 나타났다.