• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.2
• /
• pp.71-79
• /
• 2020

Purpose: The purpose of this study is to derive basic data for desirable location and functions of the integrated care center. Methods: Survey, Questionaire and statistical analysis are the main research method of this study. In order to collect data related to utilization pattern and favorite functions of the senior people, researchers have visited 4 social welfare facilities located in Southern Gyeonggi Province. 403 questionaires have been gathered from 4 facilities and they have been analyzed by using Excel Program of MS. Results: First, compared to other services, healthcare services have been preferred by many older people in Social welfare Facilities. This means that integrated care centers providing healthcare services for older people rather than services for children or disabilities is desirable. Second, Integrated Care Centers had better be established within the walk distance of elderly people. If it is not easy, the introduction of shuttle bus for older people is desirable. Especially, in case of large Care Center. Implications: This study shows that small facility with community care rather than big facility is desirable for small community in the point of friendliness, convenience, economy, etc.. However it is necessary to combine welfare service and healthcare service even in small centers.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.313-322
• /
• 1995

This study was conducted to find the design factors of spraying device of the boom sprayer for low volume application. Specific objectives of this study were 1) to select proper nozzles for broadcast spraying and row crop spraying by the nozzle spray characterisic experiment, and 2) to investigate the coverage characteristic of rice plant at the row crop spraying. The results of this study are summarized as follows. (1) From the tested results on the droplet diameter spectrum and spray pattern the standard flat-fan nozzle and drift guard nozzle were judged as appropriate for the broadcasting. Even flat-fan nozzle showed similar span values to standard flat-fan nozzles and drift guard nozzle : however, the nozzles were found to be inappropriate for broadcasting because of their spray pattern. Hollow cone nozzle showed relatively small span values and uniform spray pattern. (2) For the upper and lower sides of the rice plants, coverage rates of even flat-fan nozzles and hollow cone nozzles were maximum at the second row, but decreased rapidly after the third row. For the middle side of the rice plants, coverage rates of them were maximum at the first row, but decreased rapidly. When one nozzle was tested, C.V. values were in the range of 90~160% and 60~160% on entire heights of rice plant for even flat-fan nozzles and hollow cone nozzles respectively. C.V. values at other parts were poor. Spray coverage rate at the middle part was improved by overlapping the nozzles whereas there was little difference on the upper and lower part of rice plants. (3) For spraying lower part of rice plant between rows, even flat-fan nozzles and hollow cone nozzle were judged as appropriate, but in order to ensure the uniform coverage, distance between nozzles, recommended to be less than 90cm.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.393-407
• /
• 2020

In order to reduce the threat by illegal unmanned aerial vehicles, a tracking system based on sound was implemented. There are three main points to the drone acoustic tracking method. First, it scans the space through variable beam formation to find a sound source and records the sound using a microphone array. Second, it classifies it into a hidden Markov model (HMM) to find out whether the sound source exists or not, and finally, the sound source is In the case of a drone, a sound source recorded and stored as a tracking reference signal based on an adaptive beam pattern is used. The simulation was performed in both the ideal condition without background noise and interference sound and the non-ideal condition with background noise and interference sound, and evaluated the tracking performance of illegal drones. The drone tracking system designed the criteria for determining the presence or absence of a drone according to the improvement of the search distance performance according to the microphone array performance and the degree of sound pattern matching, and reflected in the design of the speech reading circuit.

• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.179-205
• /
• 2017

This research presents an in-depth analysis of location planning of the solar-hydrogen power plants for electricity production in different cities situated in Kerman province of Iran. Ten cities were analyzed in order to select the most suitable location for the construction of a solar-hydrogen power plant utilizing photovoltaic panels. Data envelopment analysis (DEA) methodology was applied to prioritize cities for installing the solar-hydrogen power plant so that one candidate location was selected for each city. Different criteria including population, distance to main road, flood risk, wind speed, sunshine hours, air temperature, humidity, horizontal solar irradiation, dust, and land costare used for the analysis. From the analysis, it is found that among the candidates' cities, the site of Lalezar is ranked as the first priority for the solar-hydrogen system development. A measure of validity is obtained when results of the DEA method are compared with the results of the technique for ordering preference by similarity to ideal solution (TOPSIS). Applying TOPSIS model, it was found that city of Lalezar ranked first, and Rafsanjan gained last priority for installing the solar-hydrogen power plants. Cities of Baft, Sirjan, Kerman, Shahrbabak, Kahnouj, Shahdad, Bam, and Jiroft ranked second to ninth, respectively. The validity of the DEA model is compared with the results of TOPSIS and it is demonstrated that the two methods produced similar results. The solar-hydrogen power plant is considered for installation in the city of Lalezar. It is demonstrated that installation of the proposed solar-hydrogen system in Lalezar can lead to yearly yield of 129 ton-H2 which covers 4.3% of total annual energy demands of the city.

• Geomechanics and Engineering
• /
• v.7 no.6
• /
• pp.589-612
• /
• 2014

This study includes determination of liquefaction potential in Erzincan city center. Erzincan Province is situated within first-degree earthquake zone on earthquake map of Turkey. In this context, the earthquake scenarios were produced using the empirical expressions. Liquefaction potential for different earthquake magnitudes (6.0, 6.5, 7.0) were determined. Liquefaction potential was investigated using Standard Penetration Test (SPT). Liquefaction potential analyses are determined in two steps: geotechnical investigations and calculations. In the first steps, boreholes were drilled to obtain disturbed and undisturbed soil samples and SPT values were obtained. Laboratory tests were made to identify geotechnical properties of soil samples. In the second step, liquefaction potential analyses were examined using two methods, namely Seed and Idriss (1971), Iwasaki et al. (1981). The liquefaction potential broadly classified into three categories, namely non-liquefiable, marginally liquefiable and liquefiable regions. Additionally, the liquefaction potential index classified into four categories, namely non-liquefiable, low, high and very high liquefiable regions. In order to liquefaction analysis complete within a short time, MATLAB program were prepared. Following the analyses, liquefaction potential index is investigated by Iwasaki et al. (1982) methods. At the final stage of this study, liquefaction potential maps and liquefaction potential index maps of the all study area by using IDW (inverse distance weighted) interpolation method in Geostatistical Analyst Module of ArcGIS 10.0 Software were prepared for different earthquake magnitudes and different depths. The results of soil liquefaction potential were evaluated in ArcGIS to map the distributions of drillings with liquefaction potential. The maps showed that there is a spatial variability in the results obtained which made it difficult to clearly separate between regional areas of high or low potential to liquefy. However, this study indicates that the presence of ground water and sandy-silty soils increases the liquefaction potential with the seismic features of the region.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.4
• /
• pp.29-36
• /
• 2007

The objective of this paper is to develop the motion recognition method for the rehabilitation program of the people with physical disabilities. Using the infrared ray LED, this method gets the information of the user's motion and tells the difference between the information we get and the pre-defined information. In order to get the fast recognition and comparison, this method positions the specific coordinates of infrared ray LED in the pre-classified sector which keeps certain distance and angle from the point of origin. The result in our experiment shows the speed over 20 frames per second in every motion, and we are satisfied the rate for the recognition of the motions which is near 98%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.118-127
• /
• 2009

This study tries to develop model in order to assess personal factors of senior traffic accidents that are widely recognized as one of the social problems. For the current practice. it gathers data (Simulation & Questionnaire Survey) of KOTSA and conducts Poisson and Negative Binomial Regression Analysis to develop traffic accident severity model. The results show that elderly drivers' accidents are mainly affected by attentiveness selection, velocity prediction ability and attentiveness distribution ability in a positive(+) way. Second, non-senior drivers' accidents are also positively(+) influenced by attentiveness selection, velocity prediction, distance perception, attentiveness distribution ability and attentiveness diversion ability. Therefore, influencing factors of senior and non-senior drivers to vehicle accidents are different. This eventually poses a indication that preliminary education for car accident prevention should be implemented based up[n the distinction between senior drivers and non-senior drivers.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.38-46
• /
• 2006

The stereoscopic camera based on the image formation principle on human eyes and the brain is designed and fabricated by using a CCD and two zoom lenses. As two zoom lenses are separated as 65 mm of the human ocular distance with the wide angle of view of $50^{\circ}$ and the variable convergence angle from $0^{\circ}$ to $16^{\circ}$, the camera can be operated by the similar binocular parallax as human eyes. In order to take the dynamic stereoscopic picture, a shutter blade for the selection of the left and right images in turns, an X-cube image combiner fur the composition of these two images through the blade, and a CCD with 60 frames per second are used.

• Journal for History of Mathematics
• /
• v.21 no.3
• /
• pp.1-30
• /
• 2008

The success of Newton's Gravitational Theory has influenced the theory of capillarity, beginning in the early nineteenth century, by providing a major model of molecular attraction. He used the equation of the attraction of spheroids, which is expressed by second order partial differential equations, to utilize this analogy as the same kind of a particle's force, between gravitational, refractive force of light, and capillarity. The solution of the differential equation corresponds to the geometrical figure of the vessel and the contact angle which is made by the fluid. Unknown abstract functions $\varphi(f)$ represent interaction forces between molecules, giving their potential functions. By conducting several kinds of experimental conditions, it was found that the height of the ascending fluid in the tube is inversely proportional to the rayon of the tube or the distance of the plate. This model is an essential element in the theory of capillarity. Laplace has brought Newtonian mechanics to completion, which relates to the standard model of gravitational theory. Laplace-Young's equation of capillarity is applicable to minimal surfaces in mathematics, to surface tensional phenomena in physics, and to soap bubble experiments.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.611-619
• /
• 2011

The purpose of this study was to analyze the kinematics of the men's triple jump at the 2011 Daegu World Championships by comparing the results to those at the 2009 Berlin World Championships. The kinematic data were gathered from two steps before take off to the landing using a seven panorama system, and these data were divided into 3 phases for 8 participants. The average jump for the finalists was longer in the Daegu championships (17.46 m) than in the Berlin championships (17.28 m). The longest jump record was increased by 23 cm. The step was the longest at 36% of the total distance, followed by the hop at 30% and the jump at 34%. The first and third phases were substantially longer than the second phase (the step). The horizontal speed at take-off increased in the order hop, step, and jump. Overall, in comparison with the results from Berlin, the horizontal velocity increased, the vertical velocity decreased, and the landing angle decreased.