• The korean journal of orthodontics
• /
• v.46 no.2
• /
• pp.96-103
• /
• 2016

Objective: To compare the transverse dental changes induced by the palatally applied Frog appliance and buccally applied Karad's integrated distalizing system (KIDS). Methods: We evaluated the pre- and post distalization orthodontic models of 39 patients, including 19 treated using the Frog appliance, which is palatally positioned (Frog group), and 20 treated using KIDS, which is buccally positioned (KIDS group). Changes in intermolar and interpremolar distances and the amount of maxillary premolar and molar rotation were evaluated on model photocopies. Wilcoxon and Mann-Whitney U tests were used for statistical evaluations. A p-value of < 0.05 was considered statistically significant. Results: Significant distopalatal rotation of premolars and distobuccal rotation of molars were observed in Frog group (p < 0.05), while significant distopalatal rotation of molars (p < 0.05), with no significant changes in premolars, was observed in KIDS group. The amount of second premolar and first molar rotation was significantly different between the two groups (p < 0.05 and p < 0.001, respectively). Furthermore, expansion in the region of the first molars and second premolars was significantly greater in KIDS group than in Frog group (p < 0.001 for both). Conclusions: Our results suggest that the type and amount of first molar rotation and expansion vary with the design of the distalization appliance used.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.441-450
• /
• 2002

The purpose of this study was compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ},\;8^{\circ},\;12^{\circ}$) of the lower second premolar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement. The cemented crowns were mounted on the testing jig with inclination of 30 degrees and the universal testing machine was used to measure the fracture strength. The results of this study were as follows : 1. The fracture strength of the ceramic crown with 2.5mm depth and $12^{\circ}$ inclination was the highest (1284 N). Crowns of 1.5mm depth and $8^{\circ}$ inclination had the lowest strength (951 N). 2. There were no significant differences in the fracture strength by axial inclination of the same occlusal depth group. 3. Most fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth.

• Journal of Periodontal and Implant Science
• /
• v.44 no.5
• /
• pp.222-226
• /
• 2014

Purpose: This study aimed to assess the interdental bone level in premolar bitewing radiographs while retracting the cheeks. Methods: Seventy-two horizontal bone defects were created on dried mandibles and maxillae. The distance from the bone level to the cement-enamel junction of premolars was detected by a modified digital caliper (considered the gold standard). The reliability of all radiographs was assessed by intraclass correlation coefficient (ICC), and the validity was compared to the gold standard using the analysis of variance test. P-values less than 0.05 were considered statistically significant. Results: This study showed that the reliability of radiographs without a cheek simulator and with 0.16 second exposure time was significantly higher than that of the two other groups (ICC=0.96 compared to 0.93 and 0.88, respectively). The results from the radiographs without a cheek simulator and with 0.16 second exposure time were more similar to the gold standard measures than those of the two other groups, although the difference was not statistically significant. Conclusions: Retracting the buccal soft tissue plays an important role in increasing the accuracy of radiographs in detecting the interdental alveolar bone level and produces more accurate results than increasing the exposure time, although it does not have a significant role in reliability of results.

• Journal of Oral Medicine and Pain
• /
• v.24 no.1
• /
• pp.95-106
• /
• 1999

This study was performed to investigate the age distribution with tooth calcification and degree of eruption of permanent teeth. For the study, healthy 184 patients from 5 to 19 years old without any previous serious dental treatment were randomly selected, and intraoral standard films and dental casts were taken for evaluation of stage of calcification and degree of eruption, respectively. Tooth calcification of 13 stages, designed by the author based on the Nolla's classification and eruption level of 4 or 5 degree was used. Data were processed by SAS/Stat program and the obtained results were as follows; 1. The age of root completed with open apex in lower posterior teeth were 13.8 years for first premolar, 14.0 years for second premolar, 10.5 years for first molar, and 14.2 years for second molar. There were no significant difference between right and left side. 2. As for the sequence of eruption, first molar was the first teeth erupted in upper arch, while central incisor was the first teeth in lower arch. In general, eruption of lower teeth were slightly earlier than the corresponding teeth of upper arch. 3. There were no difference of age of the same stage of development between Nolla's and the author's classification. From the results, the author's classification can be used for estimation of age with more finely in age of 8 to 15 years old. 4. Multiple regression equations for age with Nolla's(Ns) and the author's(Ks) classification of tooth calcification, and degree of eruption(DE) were as follow; Age(by #34) = 7.55 + 0.76Ks34 + 0.80DE34 - 0.72Ns34 Age(by #35) = 7.10 + 0.81Ks35 + 0.6IDE35 Age(by #37) = 6.61 + 0.82Ks37 + 0.5IDE37. Age(by #44) = 7.02 + 0.62Ks44 + 0.82DE44 Age(by #45) = 8.04 + 0.93Ks45 + 0.64DE45 - 0.89Ns45 Age(by #47) = 6.40 + 0.86Ks47 + 0.56DE47.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.625-631
• /
• 2001

The anatomic structure around interproximal area plays an important role not only in the natural teeth, but also in the implant. The loss of papilla can lead to cosmetic deformity, phonetic problem, food impaction on the anterior dentition, and masticatory problem, food impaction and proximal caries on the posterior dentition. The purpose of this study was to evaluate the relationship between interdental papilla existence and distance from contact point to alveolar crest in Korean posteior dentition. 45 Korean adult patients(31males, 14 females) participated in this study. Measurements were carreid out total 126 interproximal areas, 18 first premolar, 31 second premolar, 40 first molar, and 37 second molar areas. Papilla index was recorded as suggested by Jemt. Distance between contact point and alveolar crest measrued by Florida $probe^{R}$, after flap elevation. Each distance was measured 10 times by every 0.1mm unit. The results showed that the mean Papilla index 1.37 and mean distance between contact point and alveolar crest was 7.44mm. The correlation between the Papilla index and distance was high negative correlation(Pearson correlation=-0.47), and it was statistically significant(P=0.000) When the distance between contact point and alveolar crest was 5mm, the loss of papilla was appeared almost in half cases. When the distance was 6mm, the papilla loss was present 95%, when 7mm, the papilla loss was 100%.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.1
• /
• pp.12-23
• /
• 2021

Purpose. The aim of the study was to compare the lingualized implant placement creating a buccal cantilever with prosthetic-driven implant placement exhibiting excessive crown-to-implant ratio. Materials and Methods. Based on patient's CT scan data, two finite element models were created. Both models were composed of the severely resorbed posterior mandible with first premolar and second molar and missing second premolar and first molar, a two-unit prosthesis supported by two implants. The differences were in implants position and crown-to-implant ratio; lingualized implants creating lingually overcontoured prosthesis (Model CP2) and prosthetic-driven implants creating an excessive crown-to-implant ratio (Model PD2). A screw preload of 466.4 N and a buccal occlusal load of 262 N were applied. The contacts between the implant components were set to a frictional contact with a friction coefficient of 0.3. The maximum von Mises stress and strain and maximum equivalent plastic strain were analyzed and compared, as well as volumes of the materials under specified stress and strain ranges. Results. The results revealed that the highest maximum von Mises stress in each model was 1091 MPa for CP2 and 1085 MPa for PD2. In the cortical bone, CP2 showed a lower peak stress and a similar peak strain. Besides, volume calculation confirmed that CP2 presented lower volumes undergoing stress and strain. The stresses in implant components were slightly lower in value in PD2. However, CP2 exhibited a noticeably higher plastic strain. CONCLUSION. Prosthetic-driven implant placement might biomechanically be more advantageous than bone quantity-based implant placement that creates a buccal cantilever.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.268-273
• /
• 2021

Paramolar tubercle is a rare developmental dental anomaly defined as an additional cusp occurring on the buccal or lingual surfaces of the molar. Permanent molar fused with paramolar tubercles can be a cause of difficulty in root canal treatment. Therefore, proper understanding of these variations is important in order to ensure successful endodontic treatment. Cone beam computed tomography (CBCT) can be helpful to understand anatomy of complicated cases. This case report describes nonsurgical endodontic treatment of maxillary second premolar fused with paramolar tubercle.

• Journal of Korean Dental Science
• /
• v.15 no.1
• /
• pp.61-67
• /
• 2022

Purpose: This study aimed to evaluate the accuracy of bite registration using intraoral scanner based on data trimming strategy for fremitus teeth. Materials and Methods: A reference model was designed by Medit Model Builder software (MEDIT Corp., Seoul). Tooth number 24 and 25 were separated as dies and tooth number 26 was prepared for full-coverage crown. Those were printed using a 3D printer (NextDent 5100). The scanning procedure was performed by a single trained operator with one intraoral scanner (i700; MEDIT Corp.). The scanning groups were divided as follows: group 1 (G1), no fremitus; group 2 (G2), 0.5 mm buccal fremitus in the maxillary left first and second premolar; and group 3 (G3), 1.5 mm buccal fremitus in the maxillary left first and second premolar. Each group was scanned 10 times and were analyzed using the reference model data. Surface-based occlusal clearance was analyzed at the prepared tooth to evaluate accuracy. Result: Mean values of control group (G1) were 1.587±0.021 mm. G2 showed similar values to those from the control group (1.580±0.024 mm before trimming strategy and 1.588±0.052 mm after trimming strategy). G3 showed significantly greater values (1.627±0.025 mm before trimming strategy and 1.590±0.024 mm after trimming strategy) and the differences were found between trimming strategy (P=0.004). Conclusion: Bite trimming strategy for fremitus teeth is a reliable technique to reduce inaccuracies caused by the mobility at maximum intercuspation.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.4
• /
• pp.213-220
• /
• 2023

Background: Third molar extraction is the most commonly performed minor oral surgical procedure in outpatient settings and requires regional anesthesia for pain control. Extraction of the maxillary molars commonly requires both posterior superior alveolar nerve block (PSANB) and greater palatine nerve block (GPNB), depending on the nerve innervations of the subject teeth. We aimed to study the effectiveness of PSANB alone in maxillary third molar (MTM) extraction. Methods: A sample size comprising 100 erupted and semi-erupted MTM was selected and subjected to study for extraction. Under strict aseptic conditions, the patients were subjected to the classical local anesthesia technique of PSANB alone with 2% lignocaine hydrochloride and adrenaline 1:80,000. After a latency period of 10 min, objective assessment of the buccal and palatal mucosa was performed. A numerical rating scale and visual analog scale were used. Results: In the post-latency period of 10 min, the depth of anesthesia obtained in our sample on the buccal side extended from the maxillary tuberosity posteriorly to the mesial of the first premolar (15%), second premolar (41%), and first molar (44%). This inferred that anesthesia was effectively high until the first molars and was less effective further anteriorly due to nerve innervation. The depth of anesthesia on the palatal aspect was up to the first molar (33%), second molar (67%), and lateromedially; 6% of the patients received anesthesia only to the alveolar region, whereas 66% received up to 1.5 cm to the mid-palatal raphe. In 5% of the cases, regional anesthesia was re-administered. An additional 1.8 ml PSANB was required in four patients, and another patient was administered a GPNB in addition to the PSANB during the time of extraction and elevation. Conclusion: The results of our study emphasize that PSANB alone is sufficient for the extraction of MTM in most cases, thereby obviating the need for poorly tolerated palatal injections.

• Imaging Science in Dentistry
• /
• v.54 no.1
• /
• pp.49-56
• /
• 2024

Purpose: This study evaluated the impact of artifacts generated by metal crowns on the detection of proximal caries lesions in teeth at various distances using cone-beam computed tomography (CBCT). Additionally, the diagnostic impacts of tube current and metal artifact reduction (MAR) were investigated. Materials and Methods: Thirty teeth were arranged within 10 phantoms, each containing 1 first premolar, 1 second premolar, and 1 second molar. A sound first molar (for the control group) or a tooth with a metal crown was placed. Of the 60 proximal surfaces evaluated, 15 were sound and 45 exhibited enamel caries. CBCT scans were acquired using an OP300 Maxio unit (Instrumentarium, Tuusula, Finland), while varying the tube current (4, 8, or 12.5 mA) and enabling or disabling MAR. Five observers assessed mesial and distal surfaces using a 5-point scale. Multi-way analysis of variance was employed for data comparison, with P<0.05 indicating statistical significance. Results: The area under the curve (AUC) varied from 0.40 to 0.60 (sensitivity: 0.28-0.45, specificity: 0.44-0.80). The diagnostic accuracy was not significantly affected by the presence of a metal crown, milliamperage, or MAR(P>0.05). However, the overall AUC and specificity were significantly lower for surfaces near a crown (P<0.05). Conclusion: CBCT-based caries detection was not influenced by the presence of a metal crown, variations in milliamperage, or MAR activation. However, the diagnostic accuracy was low and was further diminished for surfaces near a crown. Consequently, CBCT is not recommended for the detection of incipient caries lesions.